I have a Wyve Twin Pin. My first true twin. Tried Aipa fins first but the board was too squirrely. Then I got the Machado Too Fish Keels. Now the board has a nice mix of drive and being loose. Holds a steep pocket and can be thrown around easily. You must have over $1k in fins in this video 🙂
My boards have fcs2. • Mark Richard’s midlength: I like Surf n Show(Noel salas) HP twins and also power twin with trailer(yes they also can come with trailer) • Christenson Long Phish 7’6: I like both al Merrik keel and modern keel. Both different feel but I do like them both.
I imagine the MR mid is special. Those HP twins look to have the same area as my fave CC Keels. Nice dimensions. I've never seen a trailer for the FCS2 JS Power twin, interesting. The Long Phish sounds versatile. I am glad you are experiencing different versions of the same board just from changing the fins.
@@blinksurf One of the greats for sure. I’m in a place that’s hard to get fins and plan on “borrowing” the MR template from the patent to diy some twinnies for a fish my brother left me. Thanks again for the vid man, I’m watching the snapper challenger event as I write this haha
Learned quite a lot from this video! I’m getting mid keels for my 7’6 pin tail. I’m 82kg and I like heavy footed turns. Also something I considered is that my home’s got a lot of hollow reef breaks
Good video! Thanks. I’m close to 200 pounds so I tend to push my fins hard. I I have a 7-10 twin of my own design that had big Mark Richard’s Futures twins. I set the boxes pretty far forward so the Mark Richard’s made it feel too pivoty and it lacked drive. Tried it with a small trailer but that felt too much like a thruster. Tried it with a Slater Nubster and still not enough drive. I made another board and was about to sell the 7-10 but then I put a set of honeycomb Rastovich Sea Shepherd keels on it and now I love the board! The Sea Shepherds are very thin and concave on the inside (vectors) so are incredibly fast but turn really well because they have a lot of flex. After all these years of surfing I’m still shocked at how much a different set of fins will radically change a board.
@@joeblow1942 I have experienced a few fins with concave on the inside edge. They can accelerate fast and give control but they are supposed to drag more at high speed. For good waves convex or flat might feel better. Thank you for the topic idea. I might need to find a hydrodynamics expert.
Hey@@blinksurf Futures do epic speed generating twin fins - the Rasta upright twins have a speed generating foil, and then Futures have just released the Blackstix 3.0 with the 2+1 in the range and they are epic!
My favorite set is the Asher Pacey 5.59 by Shapers and for a smaller set with stabilizer, the Machado Twin in Blackstix from Futures it's a nice and fun option.
Thank you. Trailer fins are popular with surfers who come from thrusters or can surf better than me. I rarely use a trailer because most of my tins only have two slots and I like the way it feels. (Channels also reduce the need for a trailer and I like Channels).
Ya twins are hard to dial in ! One can spend hundreds of bucks trying to find the right match , can be like buying a second board just to it right. I can't stand the BMT (Brett Merrick twins) for the CI Twin Pin I got when it was recommended specifically for that model 😂 back to the drawing board
YES I have tried the two plus one Twins. I don't like them. They are VERY light and they did not have enough hold for me in a Mashup. Never used them again.
FCS lineup now also has Akila Aipa twins, and they've turned out surprisingly good for me. Also, MF twin is somewhat interesting, but might need better waves to take full advantage of them ))
that’s great news about the Akila FCS his fins are epic. The MR twins look really good - I’ll give them a try because I’m heavy. The Akila are too small for me unless the board is very narrow and has channels.
I have a 7’0 Mid ‘6, it’s meant to be ridden as a quad but thinking of trying it as a twin for small stuff..FCS2..I’m 80kg/50yrs/surfed 35yrs..What’s your thoughts?
Great video, lots of information! Still a bit overwhelmed with the choice...any suggestions on a good fin for twin pin shaped 6'8 x 21 1/4 x 2 3/4 , im about 68kg and its my first twin set up. Any advice would be epic :)
Hi Lucy, have a look at Akila Aipa twins. They are slightly smaller than some others for your size and will work well with a Pin tail. Other similar - Album All rounder or Tyler Warrens
What are your thoughts on A board like a LOST Puddle Jumper Sting which is intended to be a quad, and setting it up with a Twin Fin? Realizing the forward fin box in a quad is more forward would the board still work well as a twin in small shoulder high and below waves? What twin fins would you recommend for a small to medium size rider? Great Fin breakdown on your videos, very helpful information.
being a winged squash tail it might work. I certainly had some good surfs on a rounded pin tail quad using twins. I tried the CC Keels Honeycomb. A small rider version is the NVS ONO. Some of the Pics I have seen of the Sting show a middle fin slot so MR style uprights with a trailer might also be worth a try. Akila is a good size for you.
@@blinksurf I tried the future K2's yesterday in shoulder high waves worked really well front side, but back side I didn't quite figure it out. I may bring a small trailer to throw in next time, thank you again for the information.
I also noticed that NVS has the ONO Twin convertible these move the fin placement further back, this may work out really well with that backside surfing. Have you used these before?
@@KitePaddleSurf I have only used the regular ONO and they are excellent fins. I reckon the convertible would do the job beautifully. I really like the look of them.
just found your channel awesome content! I am enjoying the Josh Hall Twins at the moment. 50/50 foil. Almost a hybrid keel. Seem to work well for me in most conditions and lighter (honyecomb?) construction, which suits me as I am not heavy-footed. I also have the Wild Things Hybrid Twin (upright keel) set but I am yet to try them out.
Hey thanks for the feedback. I have both those fins. The Josh Hall twins do feel light and they work super well on a 7 8 Mid narrow Swallow tail I have. I like them a lot. They are forgiving. I just tried out the Wild Things Hybrid (I chose red) on a 7 2 Mid channel bottom and a 6 5 Swallow tail and they were really good. I discovered they are almost identical to the Captain Fin Mickey February which I already love.
@@blinksurf which type of fin would work better in smaller, weaker conditions? - I am enjoying the Josh Halls but wonder if the Hybrid would generate more speed with the flat foil
@@blinksurf thank you. The Josh Halls have been great but yet to try them in really small / weak waves. Might do that first before I open up to the hybrid keels and see how they compare.
I got some carbon fibre fins knowing they would be stiffer but I'm surprised how much faster they are its kinda crazy how much faster they are they whistle like when I'm foil
The stiffness is next level. You may be able to remove the whistle by checking for small chips or specs. Look on the leading edge, trailing edge and then the main fin area. Also check fin box fitting. If you find small imperfections, sand it lightly.
If the fins are wide apart the Mikeys are great. They are amazing on my 8 2 Diamond tail twin. For anything shorter or with fins closer together the BMT will work well.
Nice vid 🎉 new insights love it What do u think about the rasta twin +1 compared to the AMT Or would u go to a modern keel fin like the asher pacey ones ? I m surfing a performance orientated twin the chilli pepper twin Cheers
I have that Rasta twin + 1 set and I like it. Its prettier than the AMT and would suit performance twins with more pulled in tails. I also have Asher Modern Keel and I love that fin. It works really well in the Lightbender which as a medium swallow tail. Not too wide not too narrow. For your board also consider the Album Shapers all-rounder. It works well in good waves for a performance twin without a trailer.
I got the modern keels by asher pacey nice ones ! But i have an issue it seems like the fin is moving a bit in the box making a cracking sound when u flex them with hands, seems like not the fin itself flexes but the fin in the box … habe u ever had that ? Is it bad or can the fin box break is they move a bit ?
you dont want the fin moving in the box @@robertkurzweil1833 I have had some fins too tight (needed sanding) or too loose. Try turning the screw a little further but be careful not to strip it. Ask the shop you bought them from to replace if they are not anle to be secured. If you bought them second hand you might also use some tape on the fin base to thicken it. I did that for a single fin that was wobbly. FCS give you a small pad to put under single fins to tighten them up if they are too loose.
Such a great video! I ordered a custom Aipa Dark Twinn (20.5 wide, 2.93 thick and 5'10" long) and would like to have a keelish option of a fin for a different feel sometimes whether big or small point breaks. I'm 6'0" and weigh 175lbs. Having seen this video I'm considering the NVS Ono, the A maro, Christenson, or BMT. I'd like to know how you would approach this decision.
I have a similar shape board from Aipa and it likes more upright style fins or more upright half keels so the A mano or BMT will be a good fin to try for your weight and hight (no trailer). The CC or ONO may have too much base.
@@blinksurf Could be a little while til we get any waves in Miami Beach but I'll let you know how it goes. The real test will be next summer when i return to Mexico for two months!
@@blinksurf By the way, I got in touch with Simon from A Mano and discussed the fin and the rendering of my board and he confirmed he believes it would work with the Dark Twinn design as you said. I let him know thanks to you I found out about this fin. Thank you!
Hey, great video. What fins would you recommend for a lost RNF 96, 6'1? Im 76kg and 6'0 tall in an begginer/intermediate stage. Learned on a 6'0 soft top.thanks!!
Hi Ollie, depending on your size and how radical you want to turn, I'd say Rasta Twins would be great if you are light and like to turn hard. (Note: Not the Rasta Keels which would be too much fin for that board). If you are heavier, and want more drive and you like to draw out your turns more, the larger sized EN or even a hybrid like the BMT would be excellent.
@@blinksurf Nice' Thanks man' I have ordered the Big Baron and got the Rasta Twins ready to go. I'm only 60kg so thinking it should work great with the Rasta's which are a future T1 template but with a foil.
you are right! Please have a look at this video where I review fins and I mention the cant ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7gvi2X6r48g.html
Hey I just started finally getting away from tri fins and have been loving riding my boards as quads. I wanna throw twin fins in all my boards but not sure where to start. Was leaning towards BMT”s. I have. 5’6 seaside, 6’2 jjf foamie and 6’10 pin tail. Is it possible to have a good twin set to start with?
Hey nice work thanks for the info. I recently bought a 5.8 FireWire seaside by machado. But it feels to wide for me , loose in the bottom but stiff in up of the wave, and very difficult for me to sink those rails , so can I compensate that with other fins than de machado quads ? I’m 1.84 meters and weight 174 lbs intermediate Daily surfer, what long to progress, surfing point breaks and beach breaks in Central America . I will thank any advice. Thank you
The newer Machado quads from Firewire seem much improved over the original ones. If you have regular Quads try them and see if it lets you get that rail sunk more. They have less surface area.
Twin fins worked fine in the 80"s before all this new tec came on the scene, sure you can tell the difference between them and may prefer some over other but any surf skeg will do if you know how to ride.
@@noelcollins9864 I'd get the L-XL because you are getting closer to 80KG and it will give you good hold. That looks like the same size as the MR set which is a go to fin. If you like it loose then the smaller ones will still work with a board of that rail length.
Nice breakdown for all sorts of twinnys. I’ve got an Album Twinbender(Lightbender with a winged swallow), and I threw in a set of Shapers x Album PT twins that I already had and they were waaay to squirley and loose. So I got a set of the EN’s and that settled it down a lot. I’m only 145 lbs(66 kilos?) but I’m heavy footed and push hard so I figured the bigger fin would be a pretty good go even though I’m a lighter surfer. Any thoughts on the EN’s vs Shapers Asher Pacey 5.55’s?
Thank you for sharing that. What an awesome board you have. I have both the EN and the Asher 5.55. I reckon they are pretty similar in surface area. I can take a pic of them both for you side by side. The NVS ONO will get you the next level of grip.
Thanks so much for the insight, a side by side pic would be great. And yeah I’m loving the board so far, just need to dial in the fins. I’ll definitely check out the NVS!
Mate, this vid is awesome! What sort of fins would you recommend in a Hypto Krypto Twin? Been surfing them with my Machado Quads, but they don't seem to work that well...
