Тёмный

How to clean a Printer Transfer Roller 

Подписаться
Просмотров 419 тыс.
% 1 540

Symptoms of a defective Transfer Roller are: - Squealing or screeching noises - Frequent paper jams - Light print -
- Streaks or spots on the rear side of the paper -
The trasfer roller is a spongy roller responsible for pulling toner from the OPC drum and onto the paper.
If your printer is malfunctioning, you may be able to save money by troubleshooting the problem yourself instead of calling a technician. Many common problems are the result of a simple issue, such as improper positioning or dirt on the surface of the roller.
Clean the transfer roller whenever you change the toner cartridge, to keep used toner from building up and clogging the print mechanism.
For any question or suggestion leave a comment
-----------------------------------------------------------------------
email: link.accessori@libero.it
other links:
www.emmegiricambi.it/
store.hp.com/us/en/cat/printers
www.brother-usa.com/printer/#.VuQbWOZghlw
-------------------------------------------------------------------------

Наука

Опубликовано:

 

17 июл 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 133   
@Oberon4278
@Oberon4278 3 года назад
This helped fix my problem when HP's own website was useless. Thank you.
@mohamedrafip.v.6344
@mohamedrafip.v.6344 4 года назад
Thank you so much for a very informative video. I tried this and the printing is clean and crisp now. Thank you once again.
@konstantinetzortzis3464
@konstantinetzortzis3464 4 года назад
Very informative and saved me the cost of another printer!!
@rammangrolia379
@rammangrolia379 4 года назад
Thanks for the practical guidance.
@amithsoni6792
@amithsoni6792 6 лет назад
Very informative thank u hope more videos from you like this i appreciate
@2timothy477
@2timothy477 3 года назад
Thank you so much. This has helped me understand the function more. Pax. Steven.
@adityamourya
@adityamourya 6 лет назад
very helpfull sir thanks
@mkalk1625
@mkalk1625 4 года назад
Very useful info, thank you
@chiptech5399
@chiptech5399 3 года назад
Awesome and informative video
@encodingperspectives
@encodingperspectives 3 года назад
Thank you!
@adlakrishna8921
@adlakrishna8921 5 лет назад
Nice tips
@afaqproducts8163
@afaqproducts8163 5 лет назад
very helpful thx
@jyothivarma5448
@jyothivarma5448 3 года назад
Very good Information
@amirmahfouz5079
@amirmahfouz5079 6 лет назад
Very good
@eliotbernard3677
@eliotbernard3677 5 лет назад
Thank you viandant5 , very cool !
@andreasalinaslopez2853
@andreasalinaslopez2853 3 месяца назад
Muy buen video
@mortezahashemi8370
@mortezahashemi8370 3 года назад
Very very goood Tnx
@jahanzaibshaheen7689
@jahanzaibshaheen7689 Год назад
Thanks a lot.
@wercore4226
@wercore4226 Год назад
THANK YOU
@mauriciomartinezchombo7022
@mauriciomartinezchombo7022 2 года назад
Thanks a lot!!!!!
@dinafitriasari2802
@dinafitriasari2802 5 лет назад
thx u. solve my problem
@arsgraphics
@arsgraphics 8 месяцев назад
thanks you very much so so so thanks
@arsgraphics
@arsgraphics 8 месяцев назад
🥰
@Copier_S
@Copier_S 2 года назад
great video
@viandant5
@viandant5 2 года назад
Thank you
@hmfaria
@hmfaria 2 года назад
Thank you! Help me to clean a Xerox Phaser 6000.
@mulukusimushi1482
@mulukusimushi1482 5 лет назад
thanks
@prashanthkumarmedisetty
@prashanthkumarmedisetty 4 года назад
Sir, I have a hp laser jet pro mfp m128 jn multifunctional printer. when we take a print it was light and some lines are not printed kindly give me the solution to get a good printing
@whapremikav539
@whapremikav539 5 лет назад
Nice, terima kasih, sekarang saya tau permasalahan cartridge saya ternyata ada pada transfer roller yang kotor ☺️ terima kasih
@petermurray2414
@petermurray2414 3 года назад
Ah. Many years ago I studied Bahasa and remember Teri a Kashmiri - thank you. Thank you for reminding me.
@cabeza_e_nema_PR
@cabeza_e_nema_PR 5 лет назад
Buen video
@fiouable
@fiouable 2 года назад
Creepy, but useful. Thanks.
@dianehouseman9470
@dianehouseman9470 2 года назад
Thanks for your help regarding adjustment of the Doctor Blade! That part is now working great, but now I am getting light yellow streaks horizontally across the page. Any ideas as to this problem?Your advice is very smart and helpful. Thank you!
@viandant5
@viandant5 2 года назад
Are the lines always at the same distance? which distance?
@dianehouseman2056
@dianehouseman2056 2 года назад
@@viandant5 Yes, Approximately 2.5 inches apart horizontally. I removed the Magenta and ran another cartridge and it worked fine. The problem is that cartridge is almost full of toner. I've adjusted the Doctor Blade several times.
@viandant5
@viandant5 2 года назад
@@dianehouseman2056 2.5 inches is the diameter of the toner roller. may be it's defective or dirty
@dianehouseman2056
@dianehouseman2056 2 года назад
@@viandant5 I cleaned it and it is better but still there. I think it must be damaged at this point. Thank you so much. You have been gracious and very helpful.
@dianehouseman2056
@dianehouseman2056 2 года назад
Would I be able to send you a photo of what it's doing? I hate to give up!
@panashemabika2570
@panashemabika2570 3 года назад
well done, can you also do a vedeo of how to change a transfer roller from laserjet mfp m426fdn. that would really help me
@viandant5
@viandant5 3 года назад
If I find that machine I'll do
@dmprdctns
@dmprdctns 2 года назад
Well done.... Thanks...
@mariebourn5047
@mariebourn5047 4 года назад
I went to print out some business cards on my xerox phaser 6022 and it did a horrible job. First time after many uses. How do I clean the sticky stuck ink off the rollers? I tried the stick another piece of paper in and it jammed immediately. Plus, if I don't have any lint free clothes, are alcohol pads ok?
@viandant5
@viandant5 4 года назад
You mean there is paper stuck in the transfer roller? However you cam use a normal cotton cloth. It would be better not to use alcohol
@georgen.8027
@georgen.8027 2 года назад
Any idea how to get the transfer roller out of the transfer assembly on a Ricoh MP C5502 without breaking it? The service guide doesn't say...
@viandant5
@viandant5 2 года назад
Sorry I have no manuals of that machine
@dianehouseman2056
@dianehouseman2056 2 года назад
I have an HP Laserjet 451 and was told to clean the Doctor Plate with instructions due to getting streaks in the Magenta color. We did that and now I am getting Magenta all over the page. Any suggestions as to what I should do? Thanks for your help.
@viandant5
@viandant5 2 года назад
The doctor blade must be adjusted, set it downward so there is less toner on the roller surface
@SureshKumar-rw5wd
@SureshKumar-rw5wd 2 года назад
Super g
@muralidharaayanur9430
@muralidharaayanur9430 2 года назад
in brother DSP 7030 printing out put comes with very light and sides are dusty block Pl.
@viandant5
@viandant5 2 года назад
Did you check the toner cartridge? Is the toner evenly distribuited on the toner roller?
@amardeepchauhan9952
@amardeepchauhan9952 5 лет назад
hi dear sir, I have canon ir 2420 xerox machine, which print a copy very light, I have changed the drum, even though the problem is same, some of the place is 60% clear and some of the place is 30% clear full document is not at all clear. what would be the problem, kindly help me with the same. Thanking you in advance.
@viandant5
@viandant5 5 лет назад
it could be the developer roller into the toner hopper, or the blade, or the toner too old
@bikashghatani807
@bikashghatani807 5 лет назад
how to fix internal misfeed error on ricoh spc 250 dn printer, already checked for debris paper pieces look good....
@viandant5
@viandant5 5 лет назад
if there is no paper in the fuser unit, may be a paper sensor near the fuser unit is broken or out of position
@bikashghatani807
@bikashghatani807 5 лет назад
ok boss i will try n let u knw ...thnx 4 ur reply
5 лет назад
I am having a gray haze problem. I think the toner cartridge I used was not compatible, now I am trying to clean the roller but it feels like there is no end to it. The more I clean it the more I can. I have been trying to it with napkins and cotton bud. It gets worse after the printer gets warmer. How long am I supposed to clean it for? Should I use water?
@viandant5
@viandant5 5 лет назад
you can use a cloth lightly dampened with water but you do not need to clean it perfectly. compressed air is the best. however maybe the roller is worn out
@zaidacity2788
@zaidacity2788 4 года назад
Sir , I have ricoh printer which creates small dots on paper in sequence ( . . . . ) like this, would you please help me in this matter?
@enda3124
@enda3124 3 года назад
good evening I am a technician reseller of lexmark products I have to replace the fuser kit of the lexmark B2865 of the maintenance kit can you tell me the exact procedure for the replacement you need to reset the counter and how to do the procedure. Thanks and good job
@viandant5
@viandant5 3 года назад
I never change this fuser, sorry I can't help you that much. The manual says reset the printer by turning it off and on again. and if the message still appears update the firmware. I hope it helps
@javinieve4898
@javinieve4898 5 лет назад
hello, I have an Old Laserjet 4 plus, a long time ago, this print dirt. This can repair cleaning this roller?
@viandant5
@viandant5 5 лет назад
without checking the printer it's impossible to say but probably the problem is the toner cartridge, or the fusers
@javinieve4898
@javinieve4898 5 лет назад
@@viandant5 I will see it. thanks, great video.
@heathcox1286
@heathcox1286 4 года назад
Use coffee filters as cloths. They are lint free
@patcar5616
@patcar5616 4 года назад
Ooooh...nice!
@ronwheeler7333
@ronwheeler7333 3 года назад
Good morning. I have a laserjet 4050tn and have a long light black streak up the whole middle of the paper. I cleaned the roller as this video showed and it was fine for a short time but now has returned. Is the roller the issue or can low toner create the problem?
@viandant5
@viandant5 3 года назад
A vertical line or horizonal line?
@mizzstarr510
@mizzstarr510 3 года назад
@@viandant5 same thing happened to me! Mine is vertical down the middle
@viandant5
@viandant5 3 года назад
@@mizzstarr510 I think the problem is not the transfer roller
@alexpuffsmith8406
@alexpuffsmith8406 Год назад
My brother HL-L2365DW jams paper in the drum unit, what could be the problem ?
@viandant5
@viandant5 Год назад
Check if the drum turns freely, check if there are foreign objects somewhere near the drum, check if the transfer roller is in the correct position
@25Frames
@25Frames 2 года назад
i have ir2318 canon printer. its comming 4.5 cm intervel paches its drum or pcr ? please help
@viandant5
@viandant5 2 года назад
you mean a repetitive defect always in the same position at 4.5 cm each?
@yusuf.manoga2292
@yusuf.manoga2292 2 года назад
would like to know more about laser jet pro 400
@viandant5
@viandant5 2 года назад
The foam roller under the drum of the cartridge is the transfer roller
@patriciajeffress5191
@patriciajeffress5191 Год назад
How do I remove the transfer roller in my Cannon Image Class MF267dw?
@viandant5
@viandant5 Год назад
Sorry I have no manuals for that machine
@sankettambe1580
@sankettambe1580 2 года назад
In ML 1610 the print quality is light. I had refilled the cartridge and cleaned the transfer roller also, but same print only little improved. and while starting it gives red light error. After 10 to 15 restart it start operating. I am unable to understand the problem. Please help me
@viandant5
@viandant5 2 года назад
There is a fuser in that cartridge, to reset the error you have to change it. then the light print could depend on the toner cartridge
@elaisatubana9812
@elaisatubana9812 Год назад
Hello I have brother HL 5450DN. I have cleaned inside my printer, changed drum and toner and it is still printing smudge. What could be the problem? How do you also take out the transfer roller out of the drum? Appreciate any help 😀
@viandant5
@viandant5 Год назад
I think the problem could be the fuser unit. You can remove the transfer roller disassembling the drum unit but if you already changed the drum unit I think it's not the problem
@elaisatubana9812
@elaisatubana9812 Год назад
@@viandant5 Kind of suspect that too. I was watching your video How to remove and clean Brother Fuser Unit, can I use your instructions to clean my printer (even with a different type)? Thanks for the reply!
@viandant5
@viandant5 Год назад
@@elaisatubana9812 yes, you can
@elizabethestarija5555
@elizabethestarija5555 Год назад
Hello is the transfer roller of HP is different from brother brand
@viandant5
@viandant5 Год назад
yes it's different
@sharonchen6748
@sharonchen6748 6 лет назад
Hi Sir, I have send you our quotation about the xerox copier parts, please kindly reply to me. Thank you. We are manufacturer, if there are any problems, please let me know, we have tech for it.
@irfanjalal2010
@irfanjalal2010 5 лет назад
Dear respected Sir how to bypass or reset Samsung ml 2165 Toner cartridge chip plz help me and guide with a video thankful
@viandant5
@viandant5 5 лет назад
For what I know there is no way to reset the chip. you have to change it, it costs some dollars
@yassirboulkerch3234
@yassirboulkerch3234 4 года назад
Hello I have this Problem PCL XL ERROR : Subsystem : KERNEL Error : CurrentCursorUndefined Operator; BeginImage Position; 8 Can you Help me Please
@viandant5
@viandant5 4 года назад
may be you are trying to print a document with unsupported symbols or characters. If you have the problem only with a PDF document try to print it as image
@yassirboulkerch3234
@yassirboulkerch3234 4 года назад
@@viandant5 OK Thank You Bro I will Try with Image and Word doc
@augustaguilherme6100
@augustaguilherme6100 3 года назад
Bonjour, j'ai une kyocera ecosysMita fs1010....Le bras qui protège le drum est cassé. ... comment réparer ? Merci
@viandant5
@viandant5 3 года назад
If I remenber well you can remove it, it's only to protect the drum during the transport
@augustaguilherme6100
@augustaguilherme6100 3 года назад
@@viandant5 merci beaucoup pour votre réponse...thank you
@hathakker802
@hathakker802 2 года назад
I have an hp colorlaserjet pro mfp m182n. I have a dot on my drum of cyan cartridge, which comes over page 4times. But after many prints I see a cyan line developing on the page so position of dot. Why does this line develops? Any solution?
@viandant5
@viandant5 2 года назад
The PCR charge roller discharge the electricity on the drum surface through the dot. In that zone the Aluminium substrate of the drum is not covered with the coating
@hathakker802
@hathakker802 2 года назад
@@viandant5 any solution to remove this line?
@viandant5
@viandant5 2 года назад
@@hathakker802 I think you have to change the drum
@hathakker802
@hathakker802 2 года назад
@@viandant5 thank you
@ercouldnt
@ercouldnt 4 года назад
Hello sir. I cleaned my drum of ML-1660, and it's getting dirty every single time again. Black spots on the exactly same place in paper all the time. What do you suggest to do?
@viandant5
@viandant5 4 года назад
which distance?
@ercouldnt
@ercouldnt 4 года назад
@@viandant5 less than 2 fingers and repeatative. also this black dots on the drum again.
@viandant5
@viandant5 4 года назад
@@ercouldnt whar is exact 2 fingers? It could be the circunference of the toner roller or the charge roller. Is there a defect on the drum where the black dot is?
@ercouldnt
@ercouldnt 4 года назад
@@viandant5 it is about 2 santimeter from dot to dot vertically. so there is 11 dots vertically and 6 horizontally per line. i can send you a picture of it sir if you want. by the way when i have cleaned the drum, i couldnt see any damage on it but tomorrow i will look at it more carefully.
@viandant5
@viandant5 4 года назад
@@ercouldnt That distance could be a defect on the charge roller
@hathakker802
@hathakker802 2 года назад
Hello. I have an hp color laserjet printer mfp m182n. I have refilled all the four toner cartridges. The printer is working fine. There is just one problem that when I print an image in grayscale the printer prints that image in yellowish black not completely black. Why does this yellowish tone develops even though I print in grayscale? Kindly recommend some solution
@viandant5
@viandant5 2 года назад
The grey scale are printed using the colors, not the black. May be the yellow cartridge is defective, or cyan and magenta are low
@hathakker802
@hathakker802 2 года назад
@@viandant5 does the setting with option 'print in black and white' uses color cartridges ?
@hathakker802
@hathakker802 2 года назад
@@viandant5 I don't see that my cyan, magenta or black cartridges are low. Yellow cartridges does not seems to be defective since color prints seems good. If there is any problem despite of these facts in yellow cartridges, what can that be. Kindly tell solution? And predict what defect can be in yellow cartridge.
@viandant5
@viandant5 2 года назад
@@hathakker802 Try to adjust the doctor blade of the Yellow cartridge so it prints lighter
@hathakker802
@hathakker802 2 года назад
@@viandant5 actually while refilling I had never disassembled the doctor blade and it's on the original position as it was when I bought it new. And also for other 3 cartridges I had never moved their doctor blades from their original position. So why does this situation arise that the doctor blade need to be adjusted?
4 года назад
Where can we buy spare transfer units?
@viandant5
@viandant5 4 года назад
There are very few spare parts for transfer units. try delavamp or uninet imaging
4 года назад
@@viandant5 Won't same size rollers do?
@viandant5
@viandant5 4 года назад
@ which roller? you mean the belt?
@TuanTran-my3gq
@TuanTran-my3gq 3 года назад
Thanksssssssssssssssssssssssssss
@myriambaj3346
@myriambaj3346 Год назад
Bonjour, j'ai des lignes horizontales sur mes impressions et j'ai une imprimante samsung xpress 430w je ne parviens pas à trouver le rouleau 😭 Seriez - vous m'aider s'il vous plaît merci.
@viandant5
@viandant5 Год назад
Which type of lines0 are you sure the problem is the transfer roller? are the lines always at the same distance?
@davidjun8136
@davidjun8136 4 года назад
What about not working at all, except only light on when switch turn on
@viandant5
@viandant5 4 года назад
It depends on which printer do you have. may be USB connection or wifi connection
@LarryJR85
@LarryJR85 Год назад
"Repating spots at the same distance of circumference of the transfer roller also indicate a defective roller." is wrong. Maybe at the circumference of the drum...
@viandant5
@viandant5 Год назад
Transfer roller nd drum have different circunferences
@JPG-Video
@JPG-Video Год назад
Hello. I've made a video to show how to replace the transfer rollers on a Lexmark printer: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-osFP36etcjw.html
@neoper8074
@neoper8074 4 года назад
don't touch it, otherwise it doesn't work at all,,,nothing will printed,,
@sharonchen6748
@sharonchen6748 6 лет назад
Our site on Alibaba 5146mall.en.alibaba.com