How To Clean a Throttle Body ~ The RIGHT Way

Подписаться 925 тыс.

Просмотров 1,8 млн

50% 1

How to properly clean a throttle body or throttle plate. In this video I will show you exactly how to clean a throttle body. Cleaning the throttle body is an EASY DIY, and can help with a rough idle, check engine light, even sticking throttle. Reprogramming or adapting a throttle body is also recommended after cleaning. #throttlebody #humblemechanic
Throttle Body Cleaner ~ amzn.to/2Colrp7
WD-40 ~ www.wd40.com
Gloves ~ amzn.to/2R7BUpJ
Electric Ratchet ~ amzn.to/2QFjFIL
Shop Towels ~ amzn.to/2Ra3lPu
Green Scrubbies ~ amzn.to/2R6EzzU
Cleaning Brush ~ amzn.to/2EF3XHg
Old Tooth Brush ~ (Just use someone's old brush)
~~~~ Support the Show ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.com/user?u=4243029
Shop Amazon ~www.amazon.com/shop/humblemec...
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Torque Wrench ~ amzn.to/2I7ke5h
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com/shop/humblemec...

Авто/Мото

Опубликовано:

18 дек 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 962

@alexrush5780 4 месяца назад

Just spent the afternoon thoroughly cleaning my mustang that’s been dead since last summer. Started up and drove no problem after a $10 fix using this video. You’re the best man thank you!

@alibairos8934 3 года назад

THANK YOU, SIR!!! - my wife's 2004 Explorer hadn't been started since February (CV-19, y'know); replaced battery but car stuck in limp home mode, codes P211/2112 (throttle actuator stuck open/closed). A thorough cleaning per your clear instructions and it runs like normal. Cost=$0.00; already had cleaners and scrubbier.

@jeffc6832 5 лет назад

Perfect timing, my wife's '09 Sonata just had a no-start yesterday due to a dirty throttle body.

@TonyTorzido 4 года назад

$800 dollars for a new one and labor. Just bought some spray and old brush. $10 lol. Thx G

@Ericsaidful 3 года назад

Its odd to me that humans in modern society spend so much of their lives in cars yet oftentimes know so little. Believe this will become a required bit of learning at home for my 3 kids.

@nicolasfernandez7402 3 года назад

@@Ericsaidful I have a boy on the way and you bet ill be teaching him young on how an engine works.

@tallpaul9475 3 года назад

It is so easy to pull remove and put a new one, I bet it would be much less than $800.

@CorbinAce 3 года назад

@@Ericsaidful Your' comment jogged my memory of when my father bought me my first car in 1951 so I could get a job. When he handed me the keys his comment was you better learn how to work on this thing, you're not calling me at 3:00 in the morning if you get stuck. It was a 1937 Plymouth. :O)

@mrclean2108 3 года назад

@@tallpaul9475 mine also costs upwards of 800 lol think he meant the throttle body itself is 800 and then labor is extra

@mygmail4148 3 года назад

Love this brother video. He explained it in a simple to understand manner for a non mechanical guy like me. Well done bro 👍

@Jan-gq6nz 3 года назад

This is the most comprehensive , easy to understand instruction for cleaning the TB that I've seen...I now need to get up the courage to do it! Thank you!

@carlosabreuv 2 года назад

Totally agree.

@RickyPisano 3 года назад

The best throttle body cleaning vid I've ever seen on RU-vid. And I've watched a LOT. THANKS A MILLION BRO!!

@markphilpot4981 4 года назад

Very good basic cleaning video! You did not forget safety issues and kept it real! Not everyone has all the tools, but a torque wrench can be borrowed or rented so it is not that hard. The key on torque is not to overdo it. Some guys think you have to grunt it or it isn’t tight. That is another trip to buy a part that isn’t cheap! Duh!

@seandunks3526 Год назад

No need for a torque wrench at all it’s just extra

@bluemonday2000 10 месяцев назад

@@seandunks3526shut up nerd

@matthewshambler2644 5 лет назад

The difference that doing a throttle body adaptation can make is amazing! In SA we have a lot of Mk3 Golfs/Jettas and "Citi Golfs" that use the Bosch MP9 EFI system. The TB's get gummed up and the stepper motor struggles more and more to stabilise idle- a good clean and adaptation (channel 098 on a Launch scan tool) and you're good to go! Even works on getting a car with a 268,272,276 degree cam to idle "properly".

@richardbustin4140 2 года назад

I was having problems with my car and was quoted R4500 for new throttle body, saw this video and decided to follow it and do as explained, long story short car works, money saved, great video.

@BroadwayLTDProductions Год назад

Yeah shops are like that. That is why I mostly work on my own car especially since I drive for Uber and put a TON of miles on the car!

@bojanpetric5030 5 лет назад

Helped with idle problem, thanks a lot, just done it today and car from almost dead, and choking and spitting missfire explosion to normal idle work, can't beleive this was problem that much, once again thanks for help

@justinstevenson2061 3 года назад

Ya fingers crossed it works for me!! Started sputtering and stalling, threw ecm code which shows either bad air or fuel intake. Most people said MAF or fuel filter. Changed the MAF no luck. Fought the “quick disconnect” fuel lines to change the filter. Aaaaaaaannndddd nothing. Heard my throttle whining and clicking so going to take it apart and see......

@davegillett4036 5 лет назад

This is exactly the information i need right now! Thank you! 😁

@brownbunny2513 5 лет назад

Thank you so much for making this video. My 2010 Chyrsler 300, has never seen a throttle body cleaning, but it will tomorrow.

@krasimir424 3 года назад

I have kia forte koup 2010 and haven't cleaned the throttle yet. Thanks for posting

@Siillky 4 года назад

Best throttle body cleaning video I’ve ever seen

@Tony-Rinaldo 3 года назад

What you got on my 40, homie?

@s7powell87 Год назад

Explained to perfection and done so thoroughly. Thank you for sharing and for all the other helpful comments.

@zackpoire7095 4 года назад

Very helpful, did the same yesterday now watching to double check everything. Thanks man!

@sarahscarborough4995 4 года назад

Great tutorial! The way the process was explained leaves no gaps in understanding throttle body cleaning. Thank you.

@BigDaddysGarage 5 лет назад

Your how to videos are so nice and detailed. I don't even own or work on any VW's, but I still like watching your videos! Thank you for making such great content!

@HumbleMechanic 5 лет назад

Thank you so much for that. I tried to make this video apply to all cars, just with a lean on VW.

@stewartrivers2730 2 года назад

Lol this guy 🤣

@mr.nobody4900 5 лет назад

Wow, I am blown away by this video...So helpful thank you, Mr for making this video.

@HumbleMechanic 5 лет назад

Thanks for the kind words.

@final0222 4 года назад

IMPORTANT! If your throttle body is an electric one, don't force open the butterfly as you may break the spring inside. Also the adaptation without vcds or vagcom might work, but always check on a forum of your car on how-to do it properly, as if you aren't prepared it's cost more than let a mechanic clean it for you

@final0222 Год назад

@Thatbeanieguy If the TB is controller by wire from gas pedal? then it's not electric. Most cars in the last 15-20 years are electric controlled.

@9aws.14 9 месяцев назад

Yepp I tried to clean mine the way he is cleaning it in this video throttle body went bad because I used my hand to opsen it

@eazyonewiththeforce 4 года назад

Ok sir this is a great video. Definitely learned something. Just got my VW back from the dealership they cleaned the Throttle body and on my way home my tac would not go over 3k I did the key on then off and it worked. Thanks again

@Cheepchipsable 3 года назад

Pretty slack of them not to do it before returning the car to you. May have been some other fault.

@salvatorespalato3503 3 года назад

Getting my throttle body cleaned on my car has worked absolute wonders. My car was stalling sometimes when stopping and getting it cleaned has stopped it wanting to stall. I'm so happy. 🤞🏻🇦🇺

@t.stephengardner8151 2 года назад

I thank you for the insight as to why my 2006 Trailblazer is stalling and running rough when stopped. That's what I was looking for when I Googled how to clean the throttle body.

@rogerpr364 Год назад

Wow! This is THE best school of servicing throttle body, Thanks for posting this, very much apriciated!!

@jcarey1010 5 лет назад

Awesome!! Another thing added to the list I need to do to my MKIV I'm sure it needs it lol. Great info Charles. Awesome work!

@RepairRenovateRenew 5 лет назад

I'd say don't use a scrubby pad if your throttle plate is coated, like in a Mazda Miata. Personally id say avoid abrasive action if possible. That said awesome vid mate

@slygrinko253 4 года назад

why?

@seanwatts392 4 года назад

@@slygrinko253 because you can scratch around the throttle plate and air can escape and make your idle more rough

@slygrinko253 4 года назад

@@seanwatts392 got it, thank you

@jordonboring3729 4 года назад

a scrubby pad is not going to scratch aluminum...

@metzmatu8409 3 года назад

The aluminium plate is not the concern, its the coating surface may get damage

@jeffreylouism 4 года назад

Perfect video, very professional and well thought out. Keep it up. 👍🏆

@jeanlouisroederer5140 2 года назад

Great video and clear explanation. I like how careful you are and the cautions you advise. Thanks

@condor5635 2 года назад

Great video. Funny I clean mine today and used a screwdriver handle to hold it open just like you did. Brilliant minds think alike! I just use acetone since it’s 80 to 90% of what’s in a spray bottle of CRC throttle bottle. Thanks for posting!

@yanislavslavkov3564 5 лет назад

For old cable driven body on Peugeot is 15 Sec key switch on, 15 sec key switch off than switch on again start the car and leave it to idle till operating temp and cooling fans turn on . For new models its similar technique but with diagnostic tool :) Great Videos , im working in Peugeot dealership. Cheers

@mr.sharik 3 года назад

So on newer (2005+) models you actually NEED propper diagnostic computer to relearn after cleanin dirty throttle body - no more handy key switch on and off for that? My 1007 1.4 petrol started to work like a diesel after throttle body cleaning..

@rw5640 2 года назад

T to yu uyyy

@carlosmaurencig6763 5 лет назад

Great video and tip about the Key-On relearn Thanks

@lafamilia9328 3 года назад

Just did my 06 Jeep Grand Cherokee (replace IAC Valve too) following your video. Just what to reach out and say thx video was perfect step by step. Jeep feels better, runs smoother. Again thx

@darylkik6204 2 года назад

Thanks for putting it simple and easy terms. I will be checking out more of your videos.

@dc76384 3 года назад

Excellent video. Very thorough. You even remembered the small details that alot of people miss, as in cleaning the mating surface of the TB and intake, also replacing the gasket.

@johnaclark1 5 лет назад

Some manufacturers don't want you spraying the cleaner directly in the TB because they have special grease on the shaft that can be washed out. Spraying on a rag and wiping it is the preferred method. Also a lot of them have special coatings that can be removed by some harsh cleaners. I'm not sure the scotch brite would be good to use on something like that so be sure and check your service data before cleaning. Lastly, some vehicles it is impossible to readapt the TB learn values without an expensive bidirectional scan tool (like VCDS.) You can end up with some wierd stuff going on with idle. Honda, for example, will not learn the idle without the bidirectional scan tool.

@sony12345111 5 лет назад

Actually a way around that with Honda is doing a ECM relearn by disconnecting the battery ends and touching then together for 15-30 mins. That forces the car to relearn everything.

@johnaclark1 5 лет назад

@@sony12345111 Nope. That does not reset the PCM, nor does it clear the TP data necessary to do an idle relearn. Been there done that and it doesn't work. I've tried it. I can say that definitively on an 08 Odyssey 3.5L V6. It clears all the stored codes and may clear some other data I'm not aware of but not the TP data.

@sony12345111 5 лет назад

@@johnaclark1 interesting, we do that at the dealership all the time because it's faster then finding a scan tool. I haven't had to do it that often but on the two cars I tried it worked

@johnaclark1 5 лет назад

@@sony12345111 Yeah, when I finally got the scan tool that would do the job it has a data PID that allows you to see the status of the idle relearn. Disconnecting the battery and holding the terminals together would not put that PID into "learning." It stayed at complete. Only a "PCM Reset" or "Clear TP data" would change it from "complete" to "learning," followed by "complete" after about 10-15 mins of idle with no loads on.

@johnaclark1 5 лет назад

@@TheRobertChannel It's not false information. I have an 08 Odyssey that would NOT relearn the idle until the TP data was cleared with the scan tool. The idle learn PID stayed at "complete" until I reset with the tool and it then changed to "Learning" and then 10 minutes or so of idling changed to "complete" and was fixed. I tried your method. It didn't work. Trust me, I tried everything and ended up having to buy a bidirectional scan tool. Once I cleared the TP data all worked well.

@jasonrainwater1218 2 месяца назад

Thorough, articulate, clear . Home run podnuh. I will be referring back to this video soon to clean my throttle. Hats off to ya !!!!

@myskullisred Год назад

Really love the little tips/tricks you add in along the way (e.g. 3:00 & 3:30). Little things like that are so helpful to novices like me.

@amak1131 5 лет назад

I did similar on my 97 Saturn SL2 as I was able to get the throttle body off easily. Gas pedal needed a kick to engage, fixed it!

@MrGreenelight 5 лет назад

amak1131, I have a 2001 Saturn L300. I suspect I may have a throttle body issue. What were the symptoms with yours.

@CerronPritchett 4 года назад

I might have to do that on mine with the throttle body it starting idling high this morning.

@MrMatt713 3 года назад

make sure you replace the gasket, even if it looks good those cars are picky. Had a Saturn with a weird idle creeping high idle and it turns out it was the throttle body gasket.

@AlexKalicinski 5 лет назад

Cool! and thank you for the help. You rock!

@jpscout8002 5 лет назад

Fantastic video. Thank you for actually taking the unit off.

@khoda9441 3 года назад

Great vid man, you are both practical and techinal.👍👍

@coorsman5499 5 лет назад

Great video appropriate all the videos you put out alway super informative I own a 2010 Silverado that’s need a cleaning what kind of affordable device could I buy to reset the throttle body

@corradokid90 5 лет назад

Great video Charles!!! Keep them coming. Happy Holidays to you and your family

@blinkybill2997 4 года назад

Well done. Clearly explained. Thanks

@TheUberdude14 5 лет назад

Oof this hits home lol, clean vw throttle body's daily at work. Customers really notice the difference when done properly

@Sloppyjalopy123 5 лет назад

Great vid, you should give us a vid on cleaning a MAF sensor properly.

@HumbleMechanic 5 лет назад

I’m not a fan of cleaning MAFs in many situations. But that comes from seeing so many MK4 MAFs screwed up haha

@steprockmedia 4 года назад

This vid was really well done. I appreciate it.

@JorgeRodriguez-po7kx 4 года назад

Definitely

@Blahblahblah94 4 года назад

Thank you for this man! Helping with my s4

@linkedup7346 5 лет назад

Great video...You approach the technical side and the common sense side very well.. Now I won't go and spray dirt from the throttle body into the engine . I'll just spray some on a cloth or shop towel and clean by hand. I don't suspect this particular car has a very dirty throttle body. Looks like I'll soon find out.

@BlatentlyFakeName 4 года назад

Btw electrical contact cleaner works just as good. Probably safer on plastics too.

@GymChess 3 года назад

Thats what I used. I didn't even remove the throttle body and just sprayed blindly all over it since I couldn't see what it looked like inside anyway. I noticed that there was a difference in how the car responded. One can also repeat the process at a later point though. Of course the best is to just remove it all together but if it involves reprogramming it and getting a new gasket if not available, it's better to avoid it.

@dwalto1977 2 года назад

Keep in mind that some manufacturers coat the throttle body bore with a specialized material and if you clean it aggressively, as this video instructs, you will remove the coating and the valve will not seal properly in the bore. This will create a higher than normal idle.

@wellnesspathforme6236 Год назад

Maybe use a plastic "brillo" pad version to do the scrubbing to avoid scratching off the coating. Let it soak for a bit longer and scrub a bit longer. Recommend this be done on cooking pots and pans, too. Keeps residual metal from being ingested and keeps the pans in better shape so they last longer.

@wellnesspathforme6236 Год назад

Use a plastic woven dish scrubber instead of the green scour pads. Let the chemical sit for a little longer and scrub a little longer. Recommend you do the same technique for your dishes, too -- using dish appropriate cleaning supplies, of course. Your pans will last longer and you will reduce the micro dose of metals that end up in your food.

@twinpro7424 2 года назад

Thank you for this video. The shop was trying to replace it. But it just needed to be cleaned. You saved me money! I subscribed so o can see more ways to save. Thank man!

5 лет назад

Just had to do this to my car. Was running like crap and I knew what it was right away. Runs great now!

@zuilok 5 лет назад

If you wanna call this throttle body dirty. I am not sure what you´d call the one I once cleaned on a mk3 golf. It had like a solid milimeter of crud all over the inside.

@miralemnermina142 5 лет назад

Yup, same with my mums Punto

@zuilok 5 лет назад

@@miralemnermina142 Haha my mum has a punto. I am afraid to touch it because it just seems to be falling apart by its own.

@brandonburt4244 5 лет назад

zuilok dude my mk4 vr6 had so much shit in there...

@miralemnermina142 5 лет назад

@@zuilok Which gen one? This one has +200 000km and has been abused all his life but it's reliable as fuck

@HumbleMechanic 5 лет назад

That is how my MK3 was too. LOL

@theamerican7080 4 года назад

Finally, some CORRECT automotive advice.

@marialab1292 4 месяца назад

Thank you ! Great explanation/demo in a not too fast manner. Planning on doing this to my 4runner when the weather breaks

@jamesjones7847 Год назад

Thanks for the video . And can now clean my throttle body with no worries 😊

@AnonYmous-qg4ph 5 лет назад

I've seen a few cars go into "limp mode" all because of a (very) dirty throttle body. It can also cause hard shifting.

@MrDCE 5 лет назад

Can TB cause the gearbox to slipping?

@andrewm5190 4 года назад

How does a dirty throttle body cause hard shifting?

@sabercatpuck 2 года назад

If the engine load % falls off the PCM can command lower line pressure in the transmission, the 3.4 and 3.8 GM's are known to have issues with this, even had a TSB put out, especially talking about the MAF but I don't see why a throttle body problem couldn't cause a similar issue.

@nickolastiguan 5 лет назад

Cleaning the TB and MAFS feels oddly satisfying to me

@DriversMagic 5 лет назад

I have never heard of anyone here in Denmark who remember to clean the throttle body. Thanks to show me how it should be done.

@HumbleMechanic 5 лет назад

Glad to help! Most of the times folks wait until there is an issue to clean it. If it’s easy to get to like the car I used, it’s worth doing it as Preventative Maintenance. 😎😎😎

@jupiter452 16 дней назад

I didn't take throttle body out on my chevy express it is very easy to access when you take mas and ducting off. Man that thing didn't look so bad at first but when I pushed on it it was seized all the gunk I was getting out with shop towl was astonighing... letting it sit overnight to evaporate any fumes left over. Squeaky clean and I can't wait to have my performance and mpg back... I will update when I start her in the am :)

@tellyfuxnbeast 5 лет назад

Another method to re learn your idol.. Start the car and let it get up to operating temperature Press your emergency brake in. Pressed the brake paddle And put your car and drive. Keep your foot on the brake.. Let the car idle for atleast one minute and then turn on the AC and let idle for atleast 1 minute Final release the E brake and take it for a quick drive so it will re learn the way you drive Done!!!💪

@nottelling4828 5 лет назад

The Throttle Body Relearn Procedure for 5th Gen camaro is much simpler: Idle for 3 mins, then turn off car for 1 min, then idle again for 3 mins. If it's still not idling correctly, take it for a spin at 44+ mph and then let it idle again. Voila.

@asusgoncalves 4 года назад

I can’t do that, mine is standard 😬😂

@juancervantez7149 4 года назад

Not Telling I have a 5th gen having that problem should I just do those steps when I’m at 44mph I just let go again till it idles how?? Sorry for my ignorance I know nothing about mechanic work. But mine is just wants to take off I cleaned the throttle body and know I try to come to a red light and all it wants to do is take off fast or jump like all accelerated it’s weird. Don’t have no check engine light nothing but that

@thurm101 4 года назад

Great video. Just got done on my Honda. Really easy maintenance. I disconnected the battery. Took it off completely so that I can do the backside. It was extremely dirty. I bought the car secondhand. Looks as if this has never been done. Lost a little coolant. But that was ok. Now how does the relearn process process goes on a Honda ?

@metzmatu8409 3 года назад

Perform a Honda throttle body relearn Reinstall the Honda throttle body using a new gasket and torque to specifications. Now that the carbon buildup is gone, you must “teach” the computer where the fully closed position is. This is called a Honda throttle body relearn or Honda throttle body reset. Shops perform a Honda throttle body reset with a scan tool, but you can perform it manually by following this procedure: 1) Turn the ignition key to the RUN position for 2-seconds. Do not start the engine. 2) Start the engine and run it at 3,000 RPM until the radiator fans come on. 3) Then let the ending idle for five minutes with no loads (lights, heated seats, rear defogger, blower motor, radio, etc OFF) 4) After five minutes, shut off the engine.

@likesrush 3 года назад

Anyone know how to do a relearn on a 2003 VW Passat W8 wagon (4.0 L) throttle body?

@nelsonconchinha2064 3 года назад

I'm not a mechanic, but this video seems very thorough. Good job!

@HumbleMechanic 3 года назад

Thank you

@BEINGOOD77 Год назад

Finally I getting the bugs, issues cleared up. Thank you. ZZ Top.

@shadowopsairman1583 5 лет назад

Always use tb cleaner and clean towels, qtips. Do not use straight carb cleaner as it can destroy certain plastics. You can spray the intake opening down too.

@sylvester6836 5 лет назад

That intro song is so damn old school 😂

@HumbleMechanic 5 лет назад

Hahaha I thought it was fitting. 😂

@soppingwetburgers6493 4 года назад

Thank you for making this video , subbed

@peterrosenburg7070 5 лет назад

Love ur videos charles keep it up

@mentaldan666 5 лет назад

File- Humble Mechanic 🚙 L Folder 📁 Videos L Folder 📁 Bad Videos L Folder 📂 Empty

@HumbleMechanic 5 лет назад

💙💙💙

@user-xk5so7wb2t 5 лет назад

Awesome job cleaning T.B. But why did you leave the intake manifold so dirty (7:29-7:35)???

@NickOfNight 3 месяца назад

Thanks! Clear, easy to follow, very informative!

@khatokhato9350 11 месяцев назад

What I do like in your channel, it is comprehensive. You use comprehensive set of tools, you narrate comprehensive directions, spray comprehensive cleaner. Before dismantling throttle body it's better to disconnect negative terminal off the battery. Touch the valve gently and do not let it shut violently! The throttle valve is actuated by the small motor which is aligned to the small plastic gears. That gears are likely get damaged when the opened throttle valve is let shut violently. Also I want to mention here some throttles feature the grid beyond the valve. The grid if you observe carefully its surface you can discern has its side next to valve edged section, whilst the other side is sloped and smooth. I don't know what this grid stands for, but I can speculate it alignes and disperses air intake to eliminate turbulence. I can say among numerous channels your narration is the most comprehensive.

@mariorrodriguez535 2 месяца назад

Seems you understood very well. let me ask you, how I do the compensation if I don't have any type of computer He used?

@khatokhato9350 2 месяца назад

@@mariorrodriguez535 just don't move throttle, get it washed with spray

@mariorrodriguez535 2 месяца назад

@@khatokhato9350 I've been watching several videos, some of them like this one remove the Throttle body like this one and relearn the sensors, I found another one who remove but don't move the flappers at all to avoid the relearning process. They say spraying without removing cause some damages in the block.

@mikejf4377 5 лет назад

Great video, why are you not wearing nitrate gloves, they can deal with the chemicals better.

@HumbleMechanic 5 лет назад

I didn't have any at the time. LOL IT was just before I got the green ones I have been wearing.

@trollaphobic 5 лет назад

Toyotas just disconnect the battery for a few minutes. Itl forget everything. All the throttle and adjusted fuel mapping are reset, which is totally annoying cuz after disconnecting the battery its totally not uncommon for a vehicle to run rough or even stall for like a day as the computer relearns and adapts.

@carnage50x 5 лет назад

trollaphobic most Toyotas have a capacitor in the computer to store power for a minute or so. if you change the battery quickly it'll still remember. I've done it a few times on multiple Toyotas.

@blairguinea1337 4 года назад

HumbleMachanic Sir........I have to say your vids are so informative and man you really know what your doing. with ya style nature thankyou.

@HumbleMechanic 4 года назад

I appreciate that!

@MsSherro 3 года назад

Great video!!! So helpful! Thank you!

@michaelwalker4416 4 года назад

That throttle was clean already, compared to the black one I just cleaned. My girl was like, you bought a new one... best sex ever

@greer8288 3 года назад

Whoa you lost me when you started talking about the computer stuff at 9:07. I don't have one if those things and I ain't going to buy one

@teddyvillaflor4036 3 года назад

Thank you for sharing your knowledge... From Philippines.

@DRE718 4 года назад

Thanks for this man!!!!

@yednekachewmechal9935 3 года назад

This is exactly the best information i need right now! how do i reset the computer after cleaning without using a computer?

@cowboyexecution3642 3 года назад

Disconnect the negative post on the battery for a couple of minutes

@Nobody-U-Want-2-Know 5 лет назад

Are you certain I need to use an old toothbrush?

@manuelsalvatierra2940 5 лет назад

He said a cheap new one is fine too

@HumbleMechanic 5 лет назад

It’s how I get my wife to use a new brush. Haha she holds on to them too long

@FourDigitedMenace 5 лет назад

Looool hanging her out to dry XD poor misses H. @@HumbleMechanic

@cheesemons 5 лет назад

You could also use your brother's toothbrush like the other youtuber.

@QuakerSteveT 5 лет назад

Thanks for the vid!

@marcusmarcuscook 8 месяцев назад

All I can say is thank, bro. This was alot of help

@xhesizai4193 3 года назад

Does you manually moving the throttle up and down mess up the throttle “calibration”? Lol

@MrMleri 2 года назад

Hello my friend... If loss calibration how I can restore in home alone?? Thanks

@luissoto1491 2 года назад

There's usually a screw that is used to adjust it, don't mess with it though unless you're into tuning.

@scoots8519 4 года назад

Finally found out what happen to Forest Gump after he quit running, became throttle body mechanic.

@pogchampminku2535 Год назад

Our family car is a 2015 holden commodore sv6 wagon. Yesterday we took it to the mechanic because the RPM was quite low (around 500, should be 750-1000) and it stalled a few times. I did some research and it said a vacuum leak or a dirty throttle body were the two most common causes of this issue and I was right! the mechanic said it was the throttle body so he gave it a clean and the car is back to normal!

@theadventuresofjavier8698 5 лет назад

Excellent video .from now on we should call you Humble Mechanic PhD..nice job Doc

@HumbleMechanic 5 лет назад

Hahaha. I like it

@ItsPaulby 4 года назад

Hard to concentrate with that R32 in the background.... come on man...

@HumbleMechanic 4 года назад

She’s pretty rad

@blairguinea1337 4 года назад

Yeah the r32 is pretty nice, those things haul !

@apexkeeper 5 лет назад

Dont try this on one of fords goofy coated throttle bodies!

@Blazer02LS 5 лет назад

They make a coating same cleaner but it's anemic compared to the good stuff...

@CheezyDee 5 лет назад

Meh, I clean it anyway with regular TB cleaner. What's it going to do, rust?

@IIGrayfoxII 5 лет назад

@@CheezyDee Knowing ford. YES

@apexkeeper 5 лет назад

@@CheezyDee They start developing problems with sticking once the coating is removed.

@mahamaha4816 4 года назад

Its good you warned about cleaning throttle body attached.. some youtube junkies suggested that.. Also thanks for that clamp spray suggestion. I got a rusted bolt there. But the alignment is not under DIY.

@davidhughes6368 5 лет назад

Nice explanation Charles good video

@mig21m13 4 года назад

This is classical for "das auto" cars, full of oil inside of throttle body.

@JoseManuelCastillodamboo 3 года назад

Thanks for the tuto!

@siachen6680 5 лет назад

Great detailed explanation. Thank you

@HumbleMechanic 5 лет назад

Thank you

@dmajumdar2059 5 лет назад

Great video mate! Love German cars.

@Cabsorx 5 лет назад

Succesfully copied you step by step. Worked perfectly. Thanks ! :D

@HumbleMechanic 5 лет назад

awesome.

@HumbleMechanic 5 лет назад

awesome.

@mexico4463 2 года назад

Detail explanation good job man!!

@billyquaide1902 3 года назад

Green Scrubby pad was a good recommendation. Toothbrush gunks up quickly and pads go further and work well to reach if you don't want to take throttle body off. (2004 Sienna ltd 6cyl)