How to clean brushed RC motors 

⚠️⚠️⚠️Hay bud. Penetrating oil devolves what little grease or gear oil they use on the bearings. After cleaning the penetrating oil will evaporate along with the lube it needs. Always add lube after penetrating oil is dry. Penetrating oil has a solvent mixed with oil to thin it out. It literally melts grease from bearings. Add penetrating oil to a squeaky bearing, the squeak stops temporarily then it comes back louder.

The problem with spraying the penetrating oil inside of the can like that is that it attracts dust and it will get dirtier faster than it did before

awesome tip bro you got a new sub man

if you fill a glass up with the fluid and dip the motor in while it is running on a 12v battery you will also clean the brushes and the commutator. You can use wd40 or brake cleaner or similar.

Lube the bearings with 10W non detergent Machine Oil.

cool video👍🏻😊😊

cool nice to know that.. thanks! subscribed😎

How about using the wD40 first to loosen uo oil and grit followed by parts cleaner ?

good to know subscribed

Hey I recently bought a slash 1/16 that came with the titan 12t and I rode it in a small muddy puddle and the titan wont start moving or work but it can turn on can you help in any way?

Hi any idea how we can skim at home

Great video my freind , I do the same with mine, great how to Video, is that a 540 brushed Motor. Does it take 3s and are they fast Motors. ? Big THUMBS up from me and a sub to go along with that my friend 👍 keep safe and well and keep them coming. 👍🇬🇧😁🇺🇸

this is the hard and expensive way to do it.

Penetrating fluid isn't lube, it's penetrating fluid... WD-40 is to loosen up rusty bolts, not for cleaning or lubricating.

Maf cleaner should be good

Electric parts cleaner leaves a goo all over everything! Use Nitro motor and karts cleaner!

Don't use only wd-40 there will come smoke out. I did it btw