How to Clean Motorcycle Carbs 

Bro...thank you for this detailed video...I was nervous about messing with the carbs on my yzf 600r ...now I'm about to crack a Heineken and get started lol

enjoyable to watch and removing the fear from doing my own carb cleaning. thanks for posting.

Tip for everyone...take pictures of what it look like before you forget how to set it back..✌️

Just bought one of these and been watching some videos on carbs.Very good video quality, and clear instructions, thanks man

Oh man!! Thanks for the video. I've left mine sit way too long and have to do a complete carb. rebuild-cleaning, and flush the system. Appreciate the extra attention to the camera angles - great "how to" video. Thanks again!

My 2002 Thundercat is due to for this. Your guide video is great. Thank you brother.

Thanks for the help just got my first bike need to clean the carbs on it this video helped a lot thanks!

Thanks for the video man! Easy do understand and super useful !

Great video..well explained...we appreciated..thanks.

would it be at all possible to do the cleaning with the carbs left in the bike? Just asking. I don't know.

Very nice video. Great detail to break the job down step by step - Any tips to get to the clamps that hold the carbs to the cylinders or did you just pull them loose and tighten them during re-assembly?

Good video. I just cleaned my carburetors and I noticed that my carbs were missing the coolant line. Is that an important function or is it only to prevent icing within the carbs?

I fell in love with you when I saw y.ou in your father's RU-vid channel.🥺 Why you're so cute Shadhin!🥺 Masha Allah. ❤️

great video ,made me feel a lot more confident about doing this to my bike - thank you . p.s dont forget to get a battery for that smoke detector i could hear 😉

Good video but little tip you don't have to remove the idle adjustment bracket the adjuster pops of the braket

great tutorial Shadhin vhaiya how is Uncle? and how is you? stay safe as america has the most corona positive and I am Sakib your mighty little fan from Bangladesh! and I am 12. I watch the vlogs everyday and I love the vlogs and it feels like I am in America! Yes it is true thats my feeling! I am not good at English but I hope I go to America one day! 😊

Yup...my float bowl screws stripped. Any recommendations on how to get the out. I'm probably going to have to try some damaged screw extractors.

Do the carbs need to be synchronized after every cleaning/replacement? I have a 1998 Kawasaki ninja zx6r. This is my first year of riding and I’m trying to learn the most I can on my own without taking the bike to a shop. I need to do the carbs and I need to replace engine valve seal. Is this video similar to what I should do to the carbs or are there differences?

Great video but you skipped over what I found to be the most difficult part, releasing the carburetor from the boots. The screws are hidden under the carbs and I tried the best I could and couldn’t get to them.

Typically dont you wanna not get carb cleaner on the little rubber o rings on the inside of the carbs?

This should be helpful. I'm attempting this tomorrow.

Thanks for the video...but I’m attempting to try this but I can’t seem to pull the carburetor from body of the bike. Are there bolts holding the carburetor to the body/chassis?

Were you experiencing crazy idle speeds changing by itself before cleaning?

Spraying carb cleaner where it will reach the diaphragm is a bad idea. It looks like you sprayed it where the fuel inlet is which would probably put it on the diaphragm. Full strength will damage it.

are the sliders connected to the diaphragm supposed to move when the bike is on or even when you use the throttle? my 01 tcat is running like crap and can't seem to figure out why and those sliders not moving is my best guess

Bro I see you’re in Jersey. Can u bring mine to you? How much would you charge?

Maintenance done to perfection.👏🏽👏🏽👏🏽

Good job!

Whas the pipe for on back of carb you disconnected.? . As mine aprears to be missing .. it still runs ok tho, so obviously.not a gas line.

I have a katana 750 cc can i change the carburators of my katana 750 cc with the katana 600 carburators ?

GOOD JOB!

And for those few people who are looking for the best ways to restore carburetors that have decades of oxidation and rust, try this: Step 1) disassemble completely. Step 2) Remove any gaskets/plastic/rubber. Step 3) Soak the bodies/ bowls in 30% muriatic acid cut down with water (doesn't have to be precise) For 15-minute intervals until satisfactory cleaning has occurred. Step 4) Immediately rinse in water and soak in a baking soda & water bath for 15 minutes a piece. (The baking soda helps prevent flash rust on metal parts and flash oxidation on the aluminum parts.) Step 5) SCRUB SCRUB SCRUB Step 6) Assemble and enjoy your seemingly brand new carburetors XD (If flash rust/oxidation continues to be a problem you need to soak them longer in the baking soda bath and/or add more baking soda TO the bath.)

If this kid can do it, you can do it.

Tu est très fort 💪😉

Can I pay you to do mine ??? I have the same bike and year..

The screws will only strip if you use Phillips drivers rather than Japanese industry standard driver (jis)

That’s pretty good video very helpful after you do that did you synchronized the carbs right and I disassembled my carbs in my Thundercat but I use the machine to clean the carbs much better professional job, but your doing a great 👍 job

thank you

Good video bro

Okay I started this and found damage to the throttle cable how do you swap those out?

I can only take off in high rpms. The 1st part of turning the throttle it stalls letting off clutch unless its high rpms

Hey man how similar is this gonna be to the yzf r6?

Hi Bro, did you film any video when you reinstall your carbs on the bike with the all connections ? I have a ZXR 400 Kawasaki, i have a hose with a metal cylinder filter, look like to the fuel filter but it's not. i think you have this too on your Keihin carbs when disassembling. This hose warm up the carbs with coolant but i didnt remember where it starts and where it goes

Is the bike a thundercat ?

Is your screws on your carb are stripped how do get them out

I'm in nj to you want to do my carbs. I have 02 r6

Float height would always be useful

Man what are you doing? This is the wrong way to clean. First don't use any kind of carb cleaner spray with the 4 carbs linked and without get out the floating and his needle cause this spray contains solvent very aggressive with the rubber. Indeed between every carburetor there are some kind of tube or hose with Oring. Using that spray can make your carbs leaking. To clean the carbs you must to take out the diaphragm and valve throttle, so you can can use gasoline and compressed air, or kerosene first and gasoline after but most important is to use compressed air 2: do not insert into the jet any kynd of metal wire, cause you make bigger the hole so your carburation go to hell. You can use good that spray only into the jet when you take out from the carbs: spray into the jet and use compressed air, if doesn't work put the jet into ultrasonic cleaner with hot water and powerful degreaser, if doesn't work put the jet into muriatic acid for few seconds and clean with water and compressed air, if doesn't work put your jet into the trash can and buy new jet, same size, prefer genuine jet. Bye:)

I ned you clean mine I saw u in New Jersey to hit me up I know you can make it for me 🤘🤘🤘

I got a yzf600r motor in a go kart😂

Nn ci sono!

Bro share your Facebook id link🙃

No "cleaning" takes place, before 11.43 into a 14 min video, called "How to Clean Motorcycle Carbs" is very disappointing. The video should be renamed to "Watch me waste Your time as I remove the carbs from the bike and do a sloppy cleaning job after that"....