How To: Clean, Rebuild, and Adjust a Carburetor.
Here are the steps:
1. Disassemble the carburetor, remove all jets, screws, gaskets, seals etc.
2. Dip the carb body and bowl in the parts cleaner for an hour.
3. Remove carburetor and scrub with brass brush.
4. Put carb back in dip overnight.
5. Remove carburetor in the morning and look at that shine!
6. Spray carb cleaner through all jets, passageways and orfices.
7. Spray compressed air through all jets, passageways and orfices.
8. Assemble Carburetor, replace seals, gaskets, needle valve, seat and jets with new ones.
9. Repeat steps 6 and 7.
10. Adjust air screw and float height according to your service manual.
Congratulations, you now have a perfectly cleaned and rebuilt carburetor that you hopefully won't have to clean ever again! (As long as you use a fuel filter and new air filter)
Please consider supporting my channel to help keep the videos coming!
Patreon: / goldguy
Paypal: www.paypal.me/masonmcalister
Hit that subscribe button to come along for the ride! / goldguyrides
Follow me on instagram @goldguy_official
and tiktok: / goldguyofficial
Check out my parts store on eBay (and merch):
www.ebay.com/usr/mcalistermoto
Thanks for Watching!
#diy #motorcycle #restoration
3 июл 2024
