Тёмный
No video :(

How to clean red brick with Sure Klean 600 

PROSOCO
Подписаться 2,9 тыс.
Просмотров 224 тыс.
50% 1

VISIT US AT: Prosoco.com - Don’t go it alone the next time you're cleaning red brick. Learn from our demonstration with Mike Dickey of Dickey Sales on how to use Sure Klean 600 to remove excess mortar from new red brick construction without harming the tool joint. Mike explains how to determine your dilution rate, what adjacent surfaces should be protected, and the personal protective equipment you’ll need before starting.

Опубликовано:

 

25 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 33   
@victoriagresham9574
@victoriagresham9574 7 лет назад
It would have been a great addition to this video to show a before/after picture once the brick had dried, so that you can see the results.
@garygibbs9813
@garygibbs9813 3 года назад
RU-vid is great service to use because you get information verbally and visually
@travisking5082
@travisking5082 5 лет назад
What about the run off? What if there is new concrete poured under the project you are working on? Such as if sidewalks were poured before you would repoint and use this product? Or new pavers or something?
@ernestocasas846
@ernestocasas846 7 лет назад
I didn't get to see the finish product.
@officedotie
@officedotie 6 лет назад
i know what a waste of time
@robertkurtz7587
@robertkurtz7587 5 лет назад
It takes 2 days weather depending for a wall to fully dry out - prob why they didn't show the finish - personally cleaning brick by hand is a waste of time - I could have washed that pier a few mins -
@truthhurts7529
@truthhurts7529 Год назад
Same application for white calcium deposits on milsap stone?
@jirip368
@jirip368 9 лет назад
Always go from top to bottom And use respirator Sometimes u have to do 50/50 to take the mortar off the brick If the brick is colored Green ,purple or any metal in Use 1/600-4/water Make sure you water from top to bottom If you not wash entire wall you will burn the brick on the buttom If is regular clay brick its fine to have chemical longer on the wall Only those colored and glazed bricks Another trick If you have whole pallet of brick ,there is a paper from manufacture what kind of cleaner should use Let me know if that work for you PS Colder days are the worst Will not work under 40degrees the best temperature form me is 50&up
@robertkurtz7587
@robertkurtz7587 5 лет назад
Most use a chemical injector ( beat way and keeps it even ) ive cleaned masonry for 25 years , going by the specs is good but sometimes you can't - trust me you get a dirty job those specs are right out the window and anyone with expierence will tell you that - even colored bricks and glazed bricks are fine to clean ( I don't know anyone wasting time cleaning by hand anymore ) mainly its only a really big concern when using muriatic - and as far as a respirator goes ( good advice but you will freak out everyone on that job ) get a 6-7 ft wand and it will keep ya away from it a bit
@giffypophd
@giffypophd 6 лет назад
You apply it bottom to top because you don’t want it to run down and streak the brick. Rinsing top to bottom is best though in my opinion.
@robertkurtz7587
@robertkurtz7587 5 лет назад
It really doesn't matter - I have 25 years exp and it's always been said to wash bottom to top but no-one ever does - only time you really have to worry about streaking is if there are stone caps or a different kind of masonry on the wall - if you get streaks just reapply chemical to streak spots n wash tight - stick to a chemical injector for cleaning - will be safer that way - Prosoco products are pretty easy to use - much safer to use then muriatic - but if you clean brick all the time muriatic is used alot more than anyone thinks
@stfuplsok
@stfuplsok 4 года назад
@@robertkurtz7587 than* muriatic
@robertkurtz7587
@robertkurtz7587 4 года назад
youtuber congrats you are that asshole
@stfuplsok
@stfuplsok 4 года назад
@@robertkurtz7587 you are welcome butthurt idiot.
@FrenchConnection67
@FrenchConnection67 3 года назад
would acid remove any tint that I had been applied on my brickwork? the tint was to blend two different colours of brick that my house was build with.
@ProsocoSince1939
@ProsocoSince1939 3 года назад
An acid could damage or remove any color that was applied to the brick after the wall was built. If the brick was manufactured with the color mixed in, then Vana Trol would be the product to test.
@garygibbs9813
@garygibbs9813 3 года назад
Garygibbs I AGREE
@davidgroskopf7898
@davidgroskopf7898 4 года назад
I have an very neglected chimney in my basement that I need to retuck point ( it’s very dirty) should I clean before
@stfuplsok
@stfuplsok 4 года назад
a* very
@taticaarce7935
@taticaarce7935 7 лет назад
Hello. I need to know to clean small spots of paint on bricks around my front door. Please. What should i use ?
@ProsocoSince1939
@ProsocoSince1939 7 лет назад
Tatica, for a small paint stripping project for a homeowner we'd suggest SafStrip 8. You can find out more about the product here: www.prosoco.com/products//products/enviro-klean-safstrip-8 To find the project we'd suggest asking your local Sherwin Williams store. It may not be in stock, but it can be ordered through them. Or you can find a distributor close to you here: www.prosoco.com/where-to-buy/
@taticaarce7935
@taticaarce7935 7 лет назад
PROSOCO Thank you. 😆. I will go and ask for.
@keithsmith3534
@keithsmith3534 4 года назад
Tatica Arc
@taticaarce7935
@taticaarce7935 4 года назад
@@keithsmith3534 What do you mean? 🤔 You didn't say nothing. 🤔
@PAULSMITH1967
@PAULSMITH1967 3 года назад
brick acid patio cleaner
@robertkurtz7587
@robertkurtz7587 5 лет назад
While I'm a big fan of prosoco products 600 is the worst cleaner they offer - ive seen numerous times it leave a wall looking blotchy- ive been washing masonry for 25 years , imo custom cleaner is the best cleaner the offer - much easier on the color and just overall makes a wall look better
@nancykwong518
@nancykwong518 3 года назад
7
@grantryan9591
@grantryan9591 7 лет назад
So it when dry,goose
@TheHeavyend81
@TheHeavyend81 6 лет назад
Mmmm just maybe it din't work to well when dried, a finished look would have been beneficial. Maybe a product not to buy.
@1stwashandseal
@1stwashandseal 5 лет назад
Always use the minimum amount of acid do a test panel cant go wrong
@stfuplsok
@stfuplsok 4 года назад
Dave Goodman too* well
@fd5903
@fd5903 4 года назад
Bllx
@jsmilers
@jsmilers 2 года назад
Why not put "cleaning excess mortar" in the title instead of wasting my time. Learn how to name your videos correctly. 99% of people clicking in are certainly looking for instruction on how to clean dirt and grime off of brick.
Далее
Masonry Wall Cleaning Demonstration by PROSOCO
3:18
Просмотров 10 тыс.
EASY MORTAR JOINT- HOW TO GROUT BRICKS AND STONES
14:09
How to Remove Efflorescence
5:13
Просмотров 42 тыс.
Using F9 To Remove Efflorescence and Rust
14:02
Просмотров 17 тыс.
Cleaning Brick Work
4:18
Просмотров 484 тыс.
Building A Brick House
10:32
Просмотров 1 млн