Тёмный

How to Clean the Mass Air Flow Sensor (Code P0101 on Nissan Altima) 

mazterovdizaster
Подписаться 2,2 тыс.
Просмотров 461 тыс.
50% 1

The "Service Engine Soon" light came on our 2011 Nissan Altima so I headed to our local O'Reillys to have them read the computer. O'Reilly's offers free check engine light diagnostics. They will read the codes and then help you research exactly what the codes mean. After connecting the OBD-II they pulled the code P0101 which says that the Mass Air Flow (MAF) Sensor is not performing correctly or has gone bad. The first thing you should try is to clean the MAF Sensor since the replacement part runs about $150. Usually a quick cleaning will remedy the situation, specially if you find that you have a real dirty air filter. It only takes minutes to do and the light will automatically cut off most the time. Sometimes you may have to have it reset but nothing another trip to O'Reilly's wont do.

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 391   
@Chevy-hw6lw
@Chevy-hw6lw 3 года назад
You’re a good guy for posting this . Probably helped hundreds of people. Good man.
@mazterovdizaster
@mazterovdizaster 3 года назад
Thanks!
@mike34744
@mike34744 5 лет назад
Not all heroes wear capes
@TLG-nc4ff
@TLG-nc4ff 6 лет назад
Lol love the rooster in the background
@mazterovdizaster
@mazterovdizaster 6 лет назад
On Up haha! That fool does that day and night. He don't know that he's only suppose to do that at sunrise.
@reyman7131
@reyman7131 Год назад
I think the 2011 Nissan Altima P0101 code is a defect of the part or the whole set up. Nissan should of did a recall on the part or something. No way this many people continue to have the same issue of that code.
@jianguopxie
@jianguopxie 6 лет назад
You helped me to solve the same problem with my Nissan Altima 2011. Thanks you very much!
@mazterovdizaster
@mazterovdizaster 6 лет назад
Peter Xie Awesome! Glad it helped!
@nikkilambstowe3901
@nikkilambstowe3901 5 лет назад
Peter Xie mood
@ironllama
@ironllama 5 лет назад
I have the same code cleaned my sensor but the service engine light does not go away. 2012 Altima
@carmenmaldonado9945
@carmenmaldonado9945 5 лет назад
Iron Llama I have the same thing 😏😫
@merezaaz4267
@merezaaz4267 5 лет назад
@@ironllama that just means it's way past cleaning issue, more than likely needs a sensor replacement
@kvasir119
@kvasir119 2 года назад
Holy moly. I've been looking everywhere for good instructions on websites and auto parts stores. Eventually found this video. Thanks brother. This video is truly helpful and shows step by step how it should be done and not just "spray it" but shows how to spray and where! I was afraid of spraying inside and now know you're supposed to do that.
@mazterovdizaster
@mazterovdizaster 11 месяцев назад
Glad to help!
@brpixels
@brpixels 4 года назад
My dealership looked at it and the service engine light and said its 350$ to replace the mass airflow sensor. Having looked at this video , I said no sir you ain't fleecing me today
@edgardhc
@edgardhc 4 года назад
replacing the sensor maybe won't resolve the problem, there are a TSB, I am looking for an specialist to reprogram the ECM according the P0101 problem. Please tell us how did you resolve it.
@gooneegoogoo123
@gooneegoogoo123 4 года назад
@@edgardhc Before you have it reprogrammed, change out the PCV valve. There is a TSB about the PCV valve needing to be swapped out. If the color of the valve is orange, it needs to be replaced with a black one. The valve can also throw that code.
@edgardhc
@edgardhc 4 года назад
@@gooneegoogoo123 Thanks for your recommendations, is black color. I tried to replace for a generic new one and din´t work, I kept the original PCV, because the generic PCV raised P0171 and the original was OK.
@gooneegoogoo123
@gooneegoogoo123 4 года назад
@@edgardhc If the original one is black, you should be OK. For code P0101, first verify that the PCV valve is black. Second, clean throttle body, clear code. If code returns then, replace MAF sensor. If code returns, then the issue is with the ecm software. Damn Nissan!!!!
@mazterovdizaster
@mazterovdizaster 4 года назад
Awesome!
@jhardt69
@jhardt69 4 года назад
Dealership wanted $380 to fix it, thanks to you I fixed it for $11 👍🏻
@mazterovdizaster
@mazterovdizaster 4 года назад
Awesome! Great to hear!
@111111111Tiger
@111111111Tiger 3 года назад
Screw the dealerships for ripping people off.
@gabrielescobar175
@gabrielescobar175 3 года назад
How long until your light turned off?
@jhardt69
@jhardt69 3 года назад
@@gabrielescobar175 after 50 miles but a couple months later it came back on, cleaned it again and it hasnt been on since
@bjemma4459
@bjemma4459 2 года назад
@@gabrielescobar175 i did mine and it went off immdeidately. this is life saving
@itsomar855
@itsomar855 6 лет назад
Took it to the mechanic told me it needed a new one. He told me it would be 280$ I’ll try to fix this this week. I’ll get back to you guys soon.
@mazterovdizaster
@mazterovdizaster 6 лет назад
unknown name Good luck! Hope it works out for you!
@itsomar855
@itsomar855 6 лет назад
I Clean it and it didn’t work so I just bought a new one for 105$ almost half the price I’ll put on tomorrow
@jorgepachecopedroza4062
@jorgepachecopedroza4062 6 лет назад
Clean ur throttle body and get a new air filter
@mazterovdizaster
@mazterovdizaster 6 лет назад
@@itsomar855 Workin well now?!
@mazterovdizaster
@mazterovdizaster 6 лет назад
@@jorgepachecopedroza4062 That helps!
@KEVIN-74
@KEVIN-74 2 года назад
I just cleaned my air flow sensor and my engine light finally went off after driving it for about 80 miles 😊.. thanks for this advice instead of paying an arm and a leg at the STEALERSHIP!!
@mazterovdizaster
@mazterovdizaster 2 года назад
Glad to help out!
@JustinMarquez
@JustinMarquez 3 года назад
BRO YOU ARE A LIFESAVER! THIS JUST WORKED ON MY 2019 ALTIMA! ENGLINE LIGHT GONE!
@mazterovdizaster
@mazterovdizaster 3 года назад
Glad to help!
@omarsanchez1249
@omarsanchez1249 2 года назад
Firestone was bout to charge me 410 and this fixed the problem what a fuckin place
@mazterovdizaster
@mazterovdizaster 2 года назад
Glad I could help!
@peterichardson9081
@peterichardson9081 4 года назад
This was a great video. Gentleman got straight to the point and told us what we needed to do and how to do it. This light just came on and coded on my sons car I should have it fixed in 10 or 15 minutes fantastic
@mazterovdizaster
@mazterovdizaster 4 года назад
Great!
@pattygq
@pattygq Год назад
did it fix the issue?
@sudokucafe
@sudokucafe Год назад
@@pattygq Yes this tip did fix the issue. Probably saved me $$$ for doing it myself.
@pattygq
@pattygq Год назад
@@sudokucafe There's also a campaign that Nissan is running in which an issue pops up about the MAF being incorrect but no drivability concerns exist. It's a quick update of the software which corrects it. Iirc it appears in high mileage Altimas. If there are drivability concerns then it's a different issue.
@rahrah8076
@rahrah8076 5 лет назад
The hole you’re spraying is the intake temperature sensor if you look further in the next hole there is a resistor that’s where you want to clean the sensor
@Tajahalexis
@Tajahalexis 3 месяца назад
God bless you!!! Thank you so much for posting this you've just helped me out tremendously.
@mazterovdizaster
@mazterovdizaster 2 месяца назад
Glad it helped!
@MarimuthuSA
@MarimuthuSA 4 месяца назад
Thanks for posting this video. I followed the instructions for my Altima 2013, after spraying mass air sensor, do i need to manually reset the "check engine" light or will it go by itself after driving for sometime?
@mazterovdizaster
@mazterovdizaster 4 месяца назад
It should turn off by itself. If not you may have to reset it with a OBD II Scanner
@MarimuthuSA
@MarimuthuSA 4 месяца назад
@@mazterovdizaster "Check Engine" light turned off by itself after driving about 30 miles. You are awesome, you saved me few hundred dollars :-) Thanks again!
@mazterovdizaster
@mazterovdizaster 4 месяца назад
@@MarimuthuSA glad to help!
@diamond35581
@diamond35581 11 месяцев назад
Thanks from a single mom not wanting to pay shop prices !!
@mazterovdizaster
@mazterovdizaster 11 месяцев назад
Glad to help!
@realdemon4u25
@realdemon4u25 2 года назад
first always disconnect battery before service a MAF sensor.
@veevee1123
@veevee1123 2 года назад
This was so helpful, now I know I can fix mines and I'm a woman
@mazterovdizaster
@mazterovdizaster 2 года назад
Glad it helped!
@veevee1123
@veevee1123 2 года назад
I changed mines yesterday and my Rogue is running so much better and the light is officially OFF!!!
@farryeverette2962
@farryeverette2962 8 месяцев назад
I have a 2020 Nissan versa I need a new air flow sensor, the dealer wants to charge me $325 and telling me I can’t put it on only the dealer cause they have to program it. But looking at the video I will try it myself , first I will try to just clean it , then if that don’t work I will get a new one but not at dealer . I really appreciate that video it helped plus the comments everyone made . Thx cause I have no money bless y’all
@mazterovdizaster
@mazterovdizaster 2 месяца назад
Hope it helped!
@chefboy-ar-d6312
@chefboy-ar-d6312 4 года назад
As easy as it is , thank you for taking the time on this🤜🤛
@mazterovdizaster
@mazterovdizaster 3 года назад
No problem 👍
@aissaboukrit6116
@aissaboukrit6116 4 года назад
Hey, I have a 2011 Nissan Altima. The check engine light is on and randomly my traction control sign goes on. When the traction sign goes on I can't pass 2,500 RPMs. Do you think if I change the filter and clean the sensor it will solve the problem? Thanks
@cristianbdippin8087
@cristianbdippin8087 4 года назад
aissa boukrit same problem
@britneybrown5996
@britneybrown5996 4 года назад
This is whats happening with my 2015 Sentra. Did you figure it out? I had the code ran at Auto zone and it brought this up. I'm just curious about why the slip/traction sign came on as well.
@edgardhc
@edgardhc 4 года назад
No, changing the air filter won't resolve the problem. The traction control and the VDC goes on because the ECM detect a problem and protect it self cutting to 2,500 RMP. There are a TSB about this issue that is very common on 2011-2012 Nissan models .
@ddaniel213
@ddaniel213 4 года назад
Have you tried using a different sensor? I had the same issue. Swapped it out with a different build of the sensor and it went away. I was using a 2011 sensor instead of a 2013 sensor
@Foodie_888
@Foodie_888 3 года назад
Did you get issue fixed?
@BallfieldBoxing
@BallfieldBoxing 5 лет назад
Nissan charged me $180 to clean it, said they put a new one in but i marked the original in an inconspicuous place. Bastards...
@mazterovdizaster
@mazterovdizaster 5 лет назад
That's dirty as hell!
@rahrah8076
@rahrah8076 5 лет назад
KD tell them what you did and they should refund you and demand your money back
@goodlookcuz
@goodlookcuz 6 лет назад
Been having this problem for two months now just did it and it fixed everything that was also setting off by it thanks for the video man 🙌🏾
@mazterovdizaster
@mazterovdizaster 6 лет назад
Divinchi Rose No problem! Glad it helped!
@YasirAli-bc9oy
@YasirAli-bc9oy 3 года назад
I have Nissan Versa 2014. The rpm is jumping and car jerking while accelerating. Lot of people suggested to clean or replace maf sensor. There are no codes or engine light, will doing this help resolve the issue?
@mazterovdizaster
@mazterovdizaster 3 года назад
It could! This controls the air fuel ratio so it could cause all sorts of issues!
@ghettonerdsociety
@ghettonerdsociety 4 года назад
Thank you brother! I’m headed to o’reilys after work
@mazterovdizaster
@mazterovdizaster 4 года назад
Great!
@johnjacoby5657
@johnjacoby5657 4 года назад
Good Video , Thanks JJ
@mazterovdizaster
@mazterovdizaster 3 года назад
You bet!
@LarryLeeMoniz
@LarryLeeMoniz 4 года назад
Great video. My car is absolutely running better, and it only cost me 10 bucks in cleaner! Thanks!
@mazterovdizaster
@mazterovdizaster 4 года назад
Awesome!
@mehujaelvasquez800
@mehujaelvasquez800 6 месяцев назад
It was a little cold out there 😮
@mazterovdizaster
@mazterovdizaster 5 месяцев назад
yeah it was!
@ericklucas9624
@ericklucas9624 4 года назад
I have my check engines On, the problem is the sensor air... Should i just clean it or buy new one??? Thank u
@mazterovdizaster
@mazterovdizaster 4 года назад
Try cleaning it first!
@ajbfwb
@ajbfwb 2 года назад
Does this code always clear by itself when the MAF is clean (it appears to be so with you car) or does it require clearing first, and making sure it doesn't reoccur? Probably varies by maker?? Good vid.
@mazterovdizaster
@mazterovdizaster 2 года назад
Sometimes it does like in my case. Sometimes they have to be erased by a scanner.
@cynthiastrickland8814
@cynthiastrickland8814 5 лет назад
Didnt work
@BenitoCBlanco
@BenitoCBlanco Год назад
What type of issues could this cause. My car is shuddering hard and has lost power although it has 260,000 miles my altima has never had a problem this bad
@nursemcfarlane6655
@nursemcfarlane6655 Год назад
Go to local body shop and have them perform diagnostic scan. The cost is free. Ask for the codes. It may be minor. Also open your hood check observe the throttle body is tightly comnected.
@mazterovdizaster
@mazterovdizaster Год назад
Exactly, stop by your local auto parts store too. They can scan your car as well and give you any codes it is currently showing.
@ToneBone5428
@ToneBone5428 2 года назад
Thank you so so so so much! You have what I wish every guide on youtube doesn't. Exact and clear instructions and easy to understand.
@mazterovdizaster
@mazterovdizaster 2 года назад
Glad it helped!
@ToneBone5428
@ToneBone5428 2 года назад
@@mazterovdizaster felt like I should update you. On the day I posted this, I tried it and turns out it didn't work. We got a new one and that didn't work. I'm gonna have it looked at when I go for an oil change on Tuesday. I'm still glad I found this though. I'm a computer guy and know how to approach computer issues. I'm clueless when it comes to cars lol. Keep doing what you do
@richiediaz3296
@richiediaz3296 3 месяца назад
what year is your nissan
@mazterovdizaster
@mazterovdizaster 3 месяца назад
It was a 2011 I believe. We no longer have it.
@jenymarie
@jenymarie 5 лет назад
Thank you so much! Fixed my issue. Worth checking the air filter while your in there. Mouse chewed through my air filter causing a tiny shred of paper to go into the MAF sensor. I lightly vacuumed it out and cleaned with spray since it was already out, and bought a new air filter of course. You saved me hundreds of dollars. Thanks! My check engine light stayed on but another search showed how to reset it.
@heahea2327
@heahea2327 4 года назад
how did you reset your check engine light? Replaced my mass air flow sensor since cel code was saying it was the issue, but cel didnt go out and symptoms revving and no power on its own was doing didnt go away fully. Replaced throttle body sensor now too, still cel on.
@kms2005111
@kms2005111 3 года назад
i do the same step for my altima 2012 but light still on? plz any advice ? or have to get new one $130
@nicktastic8183
@nicktastic8183 3 года назад
You have to clear the code after you clean it , auto zone can do this , o'reilly too
@kms2005111
@kms2005111 3 года назад
@@nicktastic8183 i do buy new one auto zone $140 drive like 5 mile light still on, so you mean i can go back to auto zone & ask them to clear the code?
@FollowerOFtheNAZARENE
@FollowerOFtheNAZARENE 4 года назад
Im a girl and couldnt freakin pull it out so girls ur probably gonna need help from a man...i was trying to be all independent and sht but ended up having to call my nephew
@mazterovdizaster
@mazterovdizaster 4 года назад
It was worth a try! Next time try putting a pick under the edge and use some leverage!
@vannitecmediastudio5860
@vannitecmediastudio5860 Год назад
Ooh man thank you so much, this helps. Seems like most Nissan's have this issue. I just came from dealership recently, they cleaned throttle body and mass airflow sensor and everything. The issue was fixed for two days then we had -15 degree Celsius then the check engine light came on for P010. Two days after the temperature went to 0 degrees Celsius. Now the P010 is gone. For what ever reason in my car this light comes on between -5 degrees and below. By any chance if anyone happen to know why this is only happening in cold please let me know, and if you know a fix that would be awesome.
@erdoganog
@erdoganog 4 года назад
hi i recently 1-2 month ago cleaned and re oiled my aftermarket knn filter then this code came... do u think i used too much oil on the filter causing this error code messed up sensor???
@mazterovdizaster
@mazterovdizaster 4 года назад
Yes! Clean the oil off it.Too much oil on K&N filters will definitely do it!
@FranciscoRodriguez-cm1yx
@FranciscoRodriguez-cm1yx 3 года назад
I enjoyed watching you video. In my city, the auto zone stores ran out of the crc brand of maf cleaner. I used the berryman brand.
@mazterovdizaster
@mazterovdizaster 2 года назад
That will do the trick!
@gilmaldonado6354
@gilmaldonado6354 6 лет назад
thank you for the video
@amen_ra6926
@amen_ra6926 Год назад
Seems like an awful lot of cleaner for such a small part. Can't it be found in smaller volume? Looks like a waste of money for something that won't get used that much. Sure, for a repair business it's a worthwhile expense. I guess to get your money's worth, you could do what the can says and clean it every time the change the air cleaner.
@biaoboo
@biaoboo Год назад
thank you
@mazterovdizaster
@mazterovdizaster Год назад
You're welcome!
@snowman_web_design_development
@snowman_web_design_development 3 года назад
I’m going to try this. U may have just saved me $130. Thanks!
@mazterovdizaster
@mazterovdizaster 3 года назад
Glad I could help!
@Snacks1991
@Snacks1991 4 года назад
Simple and to the point, 5 stars
@mazterovdizaster
@mazterovdizaster 3 года назад
Thanks!
@Mrwiseguy101690
@Mrwiseguy101690 4 года назад
My car is idling a lot better, but my service engine light is still on. Going to drive it around a bit longer and see if it turns off. UPDATE: Light just turned off after 82 miles on my 2012 Altima 2.5s.
@mazterovdizaster
@mazterovdizaster 4 года назад
Good luck!
@lalidukes111
@lalidukes111 3 года назад
I've got a question. I got a 2007 altima. When in parked it revs up by itself never going below 2rp what would the problem be
@mazterovdizaster
@mazterovdizaster 3 года назад
It could be a combination of things. Clogged cats, bad O2 sensors, bad MAF sensor, there's several things that can cause it. Get someone to put a scanner on it and see what kind of codes it has.
@lalidukes111
@lalidukes111 3 года назад
@@mazterovdizaster hey man it was the maf sensor. Just wanna say thanks for helping me out
@mazterovdizaster
@mazterovdizaster 3 года назад
@@lalidukes111 great! Glad to help!
@youngmonaco2039
@youngmonaco2039 2 года назад
I have a 2011 Altima. Same issues. No matter how many times it goes away and traction control engages too out of nowhere. Took to dealership twice and it was in and out of service for weeks. Now issue is back
@farryeverette2962
@farryeverette2962 8 месяцев назад
Question? When changing the air mass Flo , do it have to be reprogrammed?
@mazterovdizaster
@mazterovdizaster 8 месяцев назад
No
@OnzoCODM
@OnzoCODM 5 лет назад
2:56 horse? 🐎
@evanapalla6228
@evanapalla6228 4 года назад
and if it does not go away you may have to get a new one which is about 140-150$
@mazterovdizaster
@mazterovdizaster 4 года назад
Yes, easy replacement part. You can do it yourself.
@meshark_t
@meshark_t 9 месяцев назад
For ppl with this problem, did you have engine check light or Service Maitenence Soon, light on.
@krystalvasquez6783
@krystalvasquez6783 2 года назад
I took my car to get the sensor checked and this is what it showed but prior to this my car was on and the rpm was going to 1 and 1 and half and bolting .. would this be the issue to fix it
@xChie2x
@xChie2x 5 лет назад
Do I have to clear the code afterwards? Or just doing this and the service engine should go away? I did all these steps and the light hasn't gone away so might need to the replace the whole part.
@melodymendoza1935
@melodymendoza1935 4 года назад
Thank you!!!! This worked out for my Murano 2014!!
@mazterovdizaster
@mazterovdizaster 4 года назад
Great!
@joshuawalters4255
@joshuawalters4255 4 года назад
Hey Melody, did the check engine light immediately turn off or did you have to drive it a while?
@shaundrekawalker3263
@shaundrekawalker3263 23 дня назад
I can't get it loose to pull it out
@gilmaldonado6354
@gilmaldonado6354 6 лет назад
thank you for the video
@mrtankt5693
@mrtankt5693 4 года назад
Just saved $236! Just taking the time to reasearch 😁
@mazterovdizaster
@mazterovdizaster 3 года назад
Awesome!
@marvaharris2266
@marvaharris2266 6 лет назад
Thanks !! Best video ever quick & simple!!! Helped me with my Altima!!!
@mazterovdizaster
@mazterovdizaster 6 лет назад
Marva Harris Awesome! Glad it helped!
@anakinskywalker1705
@anakinskywalker1705 4 года назад
SIR YOU ARE MY SAVIOR. God bless ♥️
@mstarllrvsong7613
@mstarllrvsong7613 3 года назад
Thanks bro that help me a lot save money
@mazterovdizaster
@mazterovdizaster 3 года назад
Hell yeah! Glad I could help!
@AquadaleSpeedShop
@AquadaleSpeedShop Год назад
easy peasy! Great video!
@mazterovdizaster
@mazterovdizaster Год назад
thanks!
@GatorNick
@GatorNick 4 года назад
I have a question I hope you can answer it. Should I disconnect the negative battery cable before attempting to clean the MAF senso 2016 Nissan Sentra SV
@Yagoonhector
@Yagoonhector 2 года назад
What do I do if my screw is stripped and can’t get the maf sensor out any other way I can get in there to clean it or change it
@josemartimartir
@josemartimartir 3 года назад
Great step by step instructions. But did it stay off after driving 20+ miles?
@mazterovdizaster
@mazterovdizaster 3 года назад
Never came back on!
@josemartimartir
@josemartimartir 3 года назад
Great it's my turn today
@Quata2002
@Quata2002 5 лет назад
Thank you for posting! I was able to do this and my SES light is out.. hope this fixed it..
@mazterovdizaster
@mazterovdizaster 5 лет назад
No problem! Thanks for watching!
@charpruitt6869
@charpruitt6869 3 года назад
You go girl
@alexisrios9127
@alexisrios9127 4 года назад
Nice my neighbor has that issues I will work on his
@mazterovdizaster
@mazterovdizaster 4 года назад
Hoep it works!
@LXKeemProductions
@LXKeemProductions 3 года назад
thank you sir! worked for my altima 2012
@mazterovdizaster
@mazterovdizaster 3 года назад
Great!
@rigoscigars
@rigoscigars 2 года назад
🇺🇸🇺🇸🇺🇸
@mazterovdizaster
@mazterovdizaster 2 года назад
Thanks for watching!
@erlinflores7861
@erlinflores7861 2 года назад
Can this PO101 code affect the shifting in the transmission?
@mazterovdizaster
@mazterovdizaster 2 года назад
That's something different.
@jacobhovis7882
@jacobhovis7882 2 года назад
I have a 2008 maxima and mine has these weird screws with little dots in between the screw
@garden_planner
@garden_planner 5 лет назад
I cleaned MRF, but not working. I cleaned throttle body, replaced air filter, MRF, and PCV valve. But, P0101 is sometimes on. Is the only solution reprogramming?
@Julian-vv1kk
@Julian-vv1kk 4 года назад
Did you try clearing the code?
@elielgomez885
@elielgomez885 4 года назад
Can I do it again if it doesnt work the first time?
@mazterovdizaster
@mazterovdizaster 4 года назад
Yes, sometimes if there is some serious crud on it you can do it again and it will help.
@joser26961
@joser26961 2 года назад
Thank you for the tip it reali helps me alot
@mazterovdizaster
@mazterovdizaster 2 года назад
Happy to help!
@muminbayraktar8234
@muminbayraktar8234 4 года назад
My engine light did not go away? I did all the steps too!
@jessdave3107
@jessdave3107 3 года назад
Try disconnecting the ground on your battery. Wait about 30 mins then reconnect. That may do it.
@josiethegooseman
@josiethegooseman 3 года назад
@@jessdave3107 that did it for me! You guys rock!
@alfredkulhanek1889
@alfredkulhanek1889 2 года назад
Hello , I did steps also, light went off but came back on..I didn't disconnect battery...should I have? Tia
@tout-les-tutoriels
@tout-les-tutoriels Год назад
Bonjour super vidéo merci
@hero_strong6326
@hero_strong6326 Год назад
Ty you save me
@hero_strong6326
@hero_strong6326 Год назад
Ty you save me
@shiwanmavaneh4618
@shiwanmavaneh4618 4 года назад
I wish I had seen this earlier. Before this, I just sprayed into the hiose where sensor located. Right after this, I followed this instruction, it worked for bit. But now sensor giving me false readings. Used to be 372 on full tank but now it us 280 or less. When cable is disconnected, it still runs. 2010 Nissan pathfinder. Help. 😖
@doskoreanitos2588
@doskoreanitos2588 4 года назад
Do you recommend changing it at 90k or just cleaning it?
@mazterovdizaster
@mazterovdizaster 4 года назад
Cleaning it works. I have seen them last 200K
@jasongarcia5586
@jasongarcia5586 Год назад
Thank you for posting this sir I am going to try this. You made it seem more manageable.
@norbsj
@norbsj 4 года назад
Man took it to some mechanic he was talking about charging me $400 🤣 got myself the code from him and googled it and brought me to this video, thank you sir 😎 now I can buy myself some Jordans
@klb1apus
@klb1apus 3 года назад
😆
@kevz2104
@kevz2104 6 лет назад
THANK YOU THANK YOU THANK YOU !
@can23rob
@can23rob 4 года назад
One of the last lights to run off shows a car with the lines under it, what light is that for? Mines comes on and won’t go past 2k rpm and losses power
@rafaelfreire1286
@rafaelfreire1286 3 года назад
Im going to try it , this weekend
@mazterovdizaster
@mazterovdizaster 3 года назад
Give it a try!
@ebodaman
@ebodaman Год назад
Yours is so much eaiser to get too than the one on my wife's Nissan Quest minivan.
@mazterovdizaster
@mazterovdizaster Год назад
I bet! Minivans are crazy tight
@lovedhillon2262
@lovedhillon2262 2 года назад
HELLO GUYS , I HAVE 2007 NISSAN ALTIMA EVERYTHING IS FINE , But WHENEVER I ACCELERATE MY CAR TRIES TO STOP BUT KEEP GOING IF I do more acceleration its okay and whenever i stopped at redlight , my car is jerking and i put in netural or in parking then its fine no jerking ,, CAN ANYBODY PLEASE HELP ME NISSAN FAMILY . ????
@mazterovdizaster
@mazterovdizaster 2 года назад
That can be a combination of a dirty MAF and a clogged O2 Sensor. They both work hand and hand so if they both start going bad then you're in a real mess. Try those two!
@lovedhillon2262
@lovedhillon2262 2 года назад
@@mazterovdizaster THANKS BRTHR I WILL FIGURE OUT .
@jimmieygreen6510
@jimmieygreen6510 3 года назад
I guess it's that time of year my nissan started doing this and I couldnt get the part yet and the mfer just drained the power put my car lol and that was the only code that ever came up
@mazterovdizaster
@mazterovdizaster 3 года назад
Give it a shot!
@gregoryramsey7166
@gregoryramsey7166 4 года назад
Very nice! I think this is next weekend's project.
@mazterovdizaster
@mazterovdizaster 4 года назад
Good luck!
@juanrangel9672
@juanrangel9672 6 лет назад
Wow man, thanks for the video, I finally got my check engine light to turn off, thanks!!
@mazterovdizaster
@mazterovdizaster 5 лет назад
No problem! Thanks for watching!
@alianzadesangreREAL
@alianzadesangreREAL 5 лет назад
How many minutes or hours did you wait to get the light off?
@miguelbagazuma6720
@miguelbagazuma6720 4 года назад
Tony Stark it should go away ASAP. That’s why the guy at auto zone told me. He told me to clean it first then wait a bit. If it still shows, then it’s damaged
@joshcastillo915
@joshcastillo915 3 года назад
I did this and didn’t work so I just bought the new sensor and the light still won’t come off can you help ?
@mazterovdizaster
@mazterovdizaster 3 года назад
Sometimes you need to reset the light with a scanner. There might be something else if it didn't turn right off.
@caddieman4ever
@caddieman4ever 2 года назад
Thank you Sir. 👍🏽👍🏽
@mazterovdizaster
@mazterovdizaster 2 года назад
Your Very welcome!
@LimpKittyBiscuit
@LimpKittyBiscuit 2 года назад
Thanks for the video!
@mazterovdizaster
@mazterovdizaster 2 года назад
You're welcome!
@suraj1008
@suraj1008 2 года назад
Thanks for the video .
@mazterovdizaster
@mazterovdizaster 2 года назад
Glad to help!
@ihzero
@ihzero 5 лет назад
Can you use the cleaner to clean the contacts? :b idk
@mazterovdizaster
@mazterovdizaster 5 лет назад
They make a electrode grease that I use on connectors
@fritzpascal2737
@fritzpascal2737 2 года назад
Thank you!!! What a savior
@mazterovdizaster
@mazterovdizaster 2 года назад
Glad it helped!
@kevinm9143
@kevinm9143 5 лет назад
Didnt work on my altima. Replaced it and still have the same problem plus a c1130 code. Nissan dealer cant figure it out. Dont know what to do
@rahrah8076
@rahrah8076 5 лет назад
Kevin Martin have you figured it out the problem ?
@user-sl1mw6vo1e
@user-sl1mw6vo1e 2 года назад
Thanks, buddy. You really helped me with my Nissan Quest
@evaid4436
@evaid4436 5 лет назад
thank you for this it really helped me!
Далее
Провал со стеклянным хлебом…
00:41
How to clean the throttle body on a 2008 Nissan Altima
8:57
Code "P0101" 2019 Nissan Altima Mass Air Flow Sensor
7:47
How to CLEAN MAF Sensor in SECONDS!!
2:07
Просмотров 244 тыс.
Nissan Sentra MAF sensor P0101
7:56
Просмотров 123 тыс.