How To- Cleanest External Breather System For Harley's

Подписаться 41 тыс.

Просмотров 71 тыс.

50% 1

Step-by-Step Installation of the Revolutionary Transformer™ EBS for Harley Motorcycles. This will Extend Engine Life, Produce Power Gains & Give You Tune Stability, and Transform!
⬇️⬇️⬇️⬇️⬇️ Click Show More Below ⬇️⬇️⬇️⬇️⬇️
💥 Link to VIDEO about How The Transformer™ EBS works- • Transformer™ External ...
💥 Link to VIDEO of FAQ's on The Transformer™ - • FAQ About Transformer™...
➡️ Link to a VIDEO about Why Your Harley Will Love this Mod- • Your Harley Will Love ...
💥 Link To Photos & Details about WHY an External Breather System is so Important- www.dkcustompro...
💥 Link to External Breather Systems, Including the Transformer™ EBS- www.dkcustompro...
💥 Link to Free Flowing, Performance Air Cleaner Systems- www.dkcustompro...
➡️ Link a VIDEO about how our High Flow Air Cleaners Cool Down Your Ride- • COOL DOWN Your Harley ...
➡️ Link to a VIDEO about how important a COOL FRESH CHARGE is- • HD Exhaust-It can Heat...
🏍️ Thank you for tuning in! Be sure to Like / Comment / Subscribe
✅ Get Your DK Custom Products Here
www.dkcustompro...
🛒 Our Gear & Amazon
Check out our new Amazon page for the gear we use!
www.amazon.com...
➡️ SOCIAL MEDIA - CONNECT WITH US
/ dkcustomproducts
/ dkcustom1
/ dkcustom
/ dkcustom
📸 Our Camera Gear: www.amazon.com...
EMAIL: Support@DKCustomProducts.com
The DK Team

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@timpotter6332 2 года назад

I followed this example "almost" exactly, the breather bolt seemed to lose so I tightened them up a little bit more without a Torq Rench. After the first ride one breather bolt broke. It can out with an easy out. I called and explained what happened and that it was my fault. I'm getting another breather bolt sent, thanks for all the tips, I will follow everyone from now on! 🙂

@DKCustomProducts 2 года назад

Thanks for the comment, and for your business. We appreciate it. Sounds like you're going to be fixed up shortly. 👍

@Mike-in-PI Год назад

This video is exactly what I was looking for! My Transformer arrived last night, and I'm hoping to install it within the next couple days. Thanks!!

@DKCustomProducts Год назад

Great to hear! We appreciate your business, and I believe you will be well pleased with this mod. 👍

@thejerseyj5479 2 года назад

Very nice part and a well done installation video. Ordering mine today ! PS, all the products I've received from DK Customs work as advertised and I couldn't be happier with them.

@DKCustomProducts 2 года назад

Awesome, thank you for your business. We appreciate it! 👍 Really good to hear you are enjoying all the parts.

@gnsmk357 2 года назад

Great job. If any one still cannot put this on after these detailed instructions, they can't know which end of the bike the handle bars go on. Great video

@DKCustomProducts 2 года назад

Thanks! 👍

@THEREALBONZO 2 года назад

Yes! Thank you for this and so glad to see it as part of your Nightster build.

@DKCustomProducts 2 года назад

Thanks, glad you liked the video and are following the Nightster Makeover. 👍

@bddfc1968 2 месяца назад

This is the video my good Sir that i was talking about with you yesterday and thanks for getting everything sorted out for me and my friend Larry 😎💪🙏

@DKCustomProducts 2 месяца назад

Glad that we were able to help you and that you like the video! Thank you for commenting! 👍 MB

@bigm383 2 года назад

Really neat installation of the cleanest EBS available anywhere!

@DKCustomProducts 2 года назад

Thank you! 😀👍

@timpotter6332 Год назад

I absolutely love this product, I continue to have issues with the breather bolts breaking, I've called several times and each time received new bolts with no charge, not even a postage charge! Great customer support. The last time I received new and improved breather bolts, so I'm guessing that others have had similar issues. Can we if possible, get a couple made out of Stainless? The upgraded bolts just broke a couple days ago. I think this is the forth time replacing them. I still Love the product and don't want to change it back to stock. I'd be glad to pay for some stainless bolts and shipping cost. Please advise. Thank you for the awesome customer support. Looking forward to getting a couple more items very soon. I have so far added the Transformer, 828, Dyno Jet Turner, Deluxe tank lift, Floorboard extensions and love every one of them! Thank you all for the great ideas and products. Tim

@DKCustomProducts Год назад

Hi Tim, Glad you are enjoying so many of our parts. Thank you for your business, we appreciate it! Regarding your Transformer Bolts breaking. That is not normal, but I do not know the details of your situation. I have forwarded your message, and this response to Melissa and Devin (the "D" in DK Custom). I have run Transformers on my Twin Cams and M8 for 10's of thousands of miles with no issues, as have hundreds of other folks. I am confident we can track down what is going on with yours. Please write or call and ask for Melissa or Devin for them to see what they can do to stop them from breaking. Support@DKCustomProducts.com 662-252-8828

@thejerseyj5479 2 года назад

At 4:25 you show a polished catch can directly below the intake. That's how I did it on my '04 Fat Boy. And I believe it actually enhanced the look of my bike as well as being a conversion piece.

@DKCustomProducts 2 года назад

Very cool, thank you for sharing. Glad you are enjoying and we appreciate your business. 👍

@Dave-fw7in 2 года назад

Just installed this on my 2021 FLTRK with the older style HD ventilator ac. Great design with “O-rings” at seepage points and IMO a much cleaner install than the previous model.

@DKCustomProducts 2 года назад

Very cool! Thanks for the report. Glad you're liking it. We appreciate your business. 👍

@geraldgoodiii6993 Год назад

I thought these won’t work on the SE intakes bc they don’t use the backing plate

@Dave-fw7in Год назад

Gerald I did use older style SE Twin Cam unit HD #29400230 (with the older oval KN Filter - NOT newer tapered style)

@Dave-fw7in Год назад

Call DK- great folks & very helpful in sorting out right part combinations for your bike.

@Dave-fw7in Год назад

Call DK- great folks & very helpful in sorting out right part combinations for your bike.

@itsapittie 2 года назад

This is going to be the first thing I do to my Tri Glide after I move. Right now I have my plate full moving from Alaska to Oklahoma but once I'm settled on the other end I'm going to do some upgrades.

@DKCustomProducts 2 года назад

Thank you, we appreciate your business and believe you will be well pleased with it. Good luck on the move...that is a big one!

@ut1004bp 2 года назад

Looks nice. I'm thinking one should shoot some carb cleaner in/through the drilled ports every time you replace the air filter

@DKCustomProducts 2 года назад

That will not hurt, although it is completely unnecessary.

@edwardrivera4741 2 года назад

Got it and love it. Easy install

@DKCustomProducts 2 года назад

Thank you for your business, we appreciate it. Glad you are enjoying it! 👍

@freyatilly Год назад

You folks are just great. Nice clear explanations.

@DKCustomProducts Год назад

Thank you for your comment, much appreciated. Good to hear you're finding the videos useful/interesting.

@kennywisemansr.2323 Год назад

I think I've watched most of your videos on external breathers for the M8"s and decided to do one on my 21 trike. However I did purchase your tank lift kit and floor board extensions to combat the heat issue. So my question is some these guys not all are venting the the tanny cover and letting the breather tubes venting into the intake. Are there any advantages venting through the tanny cover vs external breather ? Now some have said they vent with both methods ? Just curious.... thanks for the videos and a ton of info !

@DKCustomProducts Год назад

Glad you are finding the videos useful/interesting. 👍 Thank you for your business, we appreciate it. Regarding EBS - Vented dipsticks and transmission cover vents do NOT take the place of external breather systems. There is still hot, oily, oxygen depleted air being fed into the intake. The folks that sell vented dipsticks and trans cover vents, have it right in their product description that they do not prevent all that crap from going into your intake. Here is a copy and paste from the Trask website- "This will reduce the oil exiting from the head breathers..." With an EBS there is NO hot, oily, oxygen depleted air going into the engine. With a dipstick or trans vent, even if there is no trace of oil in the intake, there is still hot, oxygen depleted air going into the combustion chambers, making the engine run hotter, and not as strong because of the lower oxygen content. IF you have an older M8, with the older oil pump and you are concerned about sumping...OR, IF you have a built engine with higher compression, then it may be beneficial to do an EBS And a vented dipstick or trans cover vent.

@jackklarich7045 2 года назад

Good video, very precise. Very nicely machined parts, a real game changer

@DKCustomProducts 2 года назад

Hi Jack! Thank you, means a lot. 👍

@bajarvcouple 2 года назад

Another awesome hot box improvement.

@DKCustomProducts 2 года назад

I think so too! 👍

@eddee5138 Год назад

i would like to see a threaded adapter or threads on the catch can to go directly into the transformer to eliminate hose and clamps.

@DKCustomProducts Год назад

Yes, that is a good idea. 👍 Unfortunately there is not clearance for it, AND, getting bumped would probably break the threads, if there was clearance.

@DWinthekeys Год назад

Installed the transformer on my 2015 Ultra. It didn’t go exactly as this video shows but I got it done with the help of some great customer support. I have yet to try it out on a long run so I can’t say if my problem is solved yet. Quick question, can I buy just a catch can? My 2003 FatBoy needs one.

@DKCustomProducts Год назад

Man, sorry to hear it did not go smoothly for you. Glad to hear you reached out to us and were able to get some good support. Yes, we have stand alone catch-cans at these links- www.dkcustomproducts.com/4-stage-black-catch-can-for-external-breather-system-ebs-harley-2515.htm and www.dkcustomproducts.com/4-stage-black-catch-can-for-external-breather-system-ebs-harley.htm Thank you for using our parts, we appreciate it. 👍😎👍

@KurtisReed Год назад

Will this only work with your air filters? I have a large element s&s stealth with a cover I like already. Very cool product by the way

@DKCustomProducts Год назад

Thanks! It will work with some others also. You can see in this video what it will work with and and what it won't- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_XYXScy3j0Q.html

@johnjohnson2855 8 месяцев назад

Can you use a 90 brass barb so hose can go through the V part of engine

@DKCustomProducts 8 месяцев назад

Absolutely you can do that. We include a nickel coated 90 degree brass barb as part of the kit for that very reason. Check it out at this link- www.dkcustomproducts.com/external-breather-system-transformer.htm

@timpotter6332 2 года назад

I like it, been looking at the Transformer, just not sure what cleaner cover to go with? Got to think about it for a minute and when I decide I'll order it. Thanks for all the videos and intel. I have a 2016 Limited, any sugestions?

@DKCustomProducts 2 года назад

Glad you like the videos and the products. We appreciate your business and I am sure you will be well pleased with any of the intakes. The 587, 606, and 828 will all fit your Limited and provide a nice improvement. The 828 will provide a bit more of a gain than the other two....probably not enough to show seat of the pants, but it does show up on the dyno. So it really comes down to which look you like. Here is a video that you may find interesting/useful - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KT-Ts7YFtV0.html

@timpotter6332 2 года назад

@@DKCustomProducts I will be ordering a trans former. With the 828 tonight or in the am. Still undecided on the color / style. Do you carry any of the other covers for the 828?

@Foodofthesoul 5 месяцев назад

Are you no longer using the gasket with the adhesive? Mine did not appear to have an adhesive side. Almost wrecked it trying to get that off lol

@DKCustomProducts 5 месяцев назад

I believe that the M8 is the only gasket that doesn't have a sticky side. I will look at them when I get back to work on Monday and let you know for sure. Sorry for any inconvenience! Please feel free to reach out to us with any questions or concerns you have; Support@DKCustomProducts.com 662-252-8828 Thank you for commenting! MB

@ajcates9136 Год назад

Good looking parts

@DKCustomProducts Год назад

Thanks man! 👍😎👍

@RogerJohnson-j9v 5 месяцев назад

looks like something Arlen Ness already puts out the Big Sucker

@DKCustomProducts 5 месяцев назад

They look similar but function differently! Thanks for commenting! MB

@ppgforme Год назад

I got my EBS and getting ready to install it. After reading a comment about how one of the breather bolts broke after the first ride got me a little concerned. I will and do follow instructions but those bolts sound a little fragile. Why aren't they made of steel?

@DKCustomProducts Год назад

Thank you for your business, I believe you are going to be well pleased with it. They are not steel because if one does not over torque them, there is no issue. They take very little tightening, only enough for the o-rings to seal. Finger tight, and then 1/8th of a turn more. See instructions excerpt below. They are not steel for several reasons: The finish would not match. The price would need to be higher. There is no need, they are strong enough to withstand twice the recommended tightening before breaking. If one wants to paint or anodize the unit, it is more difficult with different metals. Now, making sure that everything is lined up, tighten both of the Transformer™ breather bolts to 120-144 inch lbs (not ft. lbs). Since most garages don’t have an accurate inch lb torque wrench. Put them in finger tight, as tight as you can get them with your fingers, then use an open end wrench to turn them another ⅛ of a turn. DO NOT OVERTIGHTEN! If they are overtightened, it is possible that they will break off when installing or riding down the road, leaving just the threads in the head.

@damiengarcia6944 2 года назад

Good informative video!! Well with changing the cleaner out from the stock , now will I need to get a tuner for the bike as well?

@JJPARRA1974 2 года назад

If you also have aftermarket pipes yes you will.......

@DKCustomProducts 2 года назад

Glad you found the video useful. 👍 If I recall, you have a Sportster. Sportys run a little lean from the factory. An XiED or ViED (seen at the link below) is highly recommended if you go to a free flowing air cleaner. A tuner will work also, but is not needed if you are just staying with a free flowing air cleaner and open exhaust. www.dkcustomproducts.com/xied-vied-fuel-management-c121-259.htm

@DKCustomProducts 2 года назад

Agreed. all Sportys, even bone stock, will get rid of the low speed hesitation, and have more power with a tuner or an IED product. They are just a bit too lean from the factory.

@lm4tuna0461 Год назад

I do own a 2016 Softail Slim S, I understand it is a Screamin Eagle engine and just want to make sure that what you said about Screamin Eagle is true, did you mean it will not fit on a Screamin Eagle motor or if the bike was equipped with a Screamin Eagle air cleaner? Excuse my ignorance but I’m trying to stop any future problems due to carbon buildup! If this assembly does not fit my bike, will there be a future fix for it? Any tips for people like me with non-fitment? Thanks!

@DKCustomProducts Год назад

It will fit a Screamin Eagle engine fine. It is the SE Air Cleaner that it is not compatible with. Any of the Outlaw air cleaners at the following link will work well with your SE engine and with the Transformer. www.dkcustomproducts.com/air-cleaner-intake-c10-382.htm Thanks for looking at our parts. Feel free to email or call with any questions. Support@DKCustomProducts.com 662-252-8828

@xcaseynh 5 месяцев назад

i had to remove material from my hd cv carb before the transformer would mount flush..... Ever seen this issues? I took pics and emailed the company with no response.

@DKCustomProducts 5 месяцев назад

What email address did you send the email to? I am sorry if you emailed and did not get a response. Our Customer Service usually responds within the day that the email is received. They are human and possibly over looked the email, but either way I do apologize if it was missed. That is not an issue we have seen before. If the email address that you emailed was Support@DKCustomProducts.com then please send me an email personally Melissa@DKCustomProducts.com and I will look at the pictures and respond myself. Also what year and model bike do you have? Is the carb stock or aftermarket? MB

@marcwarman2281 Год назад

Have you experienced any oil misting residue spraying from the catch can and onto the motor nose-cone etc?

@DKCustomProducts Год назад

I have not personally. However, we have seen that on more than a few bikes. Usually it is because of one of the following: 1. Catch-Can is full of oil and/or water and needs to be emptied out 2. Oil tank on Harley is over-filled and is feeding too much thru the External Breather System. See video on that here- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gJ0vYAitUqU.html 3. It is hot out and the oil being run is too light a viscosity...see manual for correct viscosity for ambient temps. (info is also in video linked above) 4. Other, more serious issues, that are listed in the video linked above. Always feel free to email or call with any questions. Support@DKCustomProducts.com 662-252-8828

@jamesmccanne331 Год назад

Is there a gasket between the transformer and back plate when putting in a 606 air cleaner system?

@DKCustomProducts Год назад

Yes. Here is a link to the instructions- www.dkcustomproducts.com/media/wysiwyg/Transformer_External_Breather_System_Instructions_updated_9-14.pdf

@joracer1 Год назад

Does the sportster kit fit the 88 evo years softtail or 92 fatboy? because i can't find the evolution kit.

@DKCustomProducts Год назад

The Transformer does not fit any of the Evo engines. All the other External Breather Systems at the following link Will fit the Evo. www.dkcustomproducts.com/91-up-sportster-big-twin-evo-c75-119.htm

@seanb3712 Год назад

I have a 2013 Street Glide and am wanting to get this. What air cleaners would be good for this and my bike? Thanks

@DKCustomProducts Год назад

Thank you for looking at our parts. 👍 The 587, 606, 828, & 636v, all seen at this link- www.dkcustomproducts.com/air-cleaner-intake-c10-375.htm All of those will fit, and perform well. There are well over 100 different looks for those 4 families of intakes. The 636v is the highest performing, but you will get a nice increase in power out of any of them. Feel free to email or call with any questions- Support@DKCustomProducts.com 662-252-8828

@rykerolaoghaire8781 2 года назад

So Tight!!!! 😎😎😎

@DKCustomProducts 2 года назад

Thank you! 👍

@Jeffmd2020 Год назад

How do I get the contrast cut with my order? If got what I need (I think) in my shopping cart but I’d love the contrast cut cover

@DKCustomProducts Год назад

I don't know what year and model bike you have, or what air cleaner you want a contrast cut cover for. Here is a link to all of our covers, including all the Contrast Cut Covers. www.dkcustomproducts.com/interchangeable-air-cleaner-face-plate-covers-c72.htm If you are wanting an entire air cleaner with a CC Cover, I would need to know which year and model bike you have, and which air cleaner you want...425, 587, 606 or 828. All of these have a Contrast Cut Cover option. Feel free to email or call with any questions. Support@DKCustomProducts.com 662-252-8828

@davidboswinkle3152 11 месяцев назад

Will a 2019 CVO ROADGLIDE (117) air cleaner work with the transformer?

@DKCustomProducts 11 месяцев назад

Most likely not! You can email our customer service a picture of your air cleaner and back plate and they can help you determine if you can use the Transformer or not: Support@DKCustomProducts.com Thanks for commenting! 😎

@stevencorry5790 2 года назад

Okay.....really like that 606 finned looking cover.Got a 2020 Heritage Special (114).....do you have the whole setup including catch can with timing cover for my bike?

@stevencorry5790 2 года назад

I'm just looking to improve looks and maybe get a little better performance

@DKCustomProducts 2 года назад

Yes, we have the finned cover for your Heritage...both in the 587 and 606. We are out of the timing covers right now, but should have more made up in the next month. Here are links to both the 587 and 606. There are options within them for the Transformer set up with catch-can, you can see them in the drop-downs. www.dkcustomproducts.com/contrast-cut-finned-hiflow-606-air-cleaner-system-harley-m8-dk-ac606-cfn-m8.htm www.dkcustomproducts.com/contrast-cut-finned-complete-hiflow-587-air-cleaner-harley-m8-dk-ac587-cfn-m8.htm

@DKCustomProducts 2 года назад

They are a good look, and you should have a nice bump in performance. 👍

@satocheuk6469 Год назад

i have a Vity's design velocity stack air cleaner, wondering the transformer mounting bracket will fit 2012 softail deluxe ? thanks

@DKCustomProducts Год назад

From the photos I've seen of the Vity's design velocity stack air cleaner, the only way the Transformer will fit is if the ears of the A/C are cut off. You can send a photo of your A/C to Support@DKCustomProducts.com to verify for sure. You can also look at all our other External Breather Systems at this link- www.dkcustomproducts.com/all-twin-cam-engines-c76-311.htm Thanks for looking at our parts! 👍😎👍

@mymm6327 Год назад

I do have the Arlen Ness Method Air System and according to a video it has nipples from the internal oil routing that pushes the crank-venting not directly into the throttle body. Any kit to continue and re-routing to outside?

@DKCustomProducts Год назад

Any of the kits at this link will work. www.dkcustomproducts.com/diy-external-breather-systems-527.htm

@og190 2 года назад

Is this available in different sizes for the various sized throttle bodies?

@DKCustomProducts 2 года назад

It is not. Even with a 131, the best torque is produced by this diameter, even if it is stepping down from a larger throttle body.

@bigwildbill2421 11 месяцев назад

What system do you suggest for a 2017 street glide M8 107 with Screamin eagle on it just started riding this year and just got this bike first Harley about a month and a half ago

@DKCustomProducts 11 месяцев назад

All of our Air Cleaners work the same. Our most popular for touring model bikes are the 606 seen at this link - www.dkcustomproducts.com/twin-cam-model-hiflow-606-air-cleaners-complete-systems-c643-298.htm or the 828 seen at this link - www.dkcustomproducts.com/twin-cam-outlaw-hiflow-828-air-cleaner-complete-systems-99.htm Either one will give you more than enough air for your bike. Here is a report that may help you make the best decision on which air cleaner you want for your bike and riding - www.dkcustomproducts.com/differences-between-outlaw-hiflow-air-cleaner-systems-dk-faq-acs.htm Please feel free to contact us with any questions or concerns: Support@DKCustomProducts.com 662-252-8828 Thank you for commenting! 😎

@joegerrera1914 Год назад

Yes I have m-8 2022 air clean it has fitting with hoses but they flow into the I take can I just reroute the hose to go external and install a catch can or breather will that work . Oh it’s on freewheeler 114. What do you think is better way to look and fix this to get a better cleaner air?

@DKCustomProducts Год назад

Yes, re-routing the existing hoses into a catch-can or filter is what many folks do..and it is just as effective at stopping that hot, oily, oxygen depleted air from going into the combustion chambers. Here is a video of someone doing that- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5tTkzGol2G4.html Feel free to email or call with any questions. Support@DKCustomProducts.com 662-252-8828

@haroldparkis733 2 года назад

Exactly what external breather do i need from DK, that will work with my Arlen Ness Inverted air cleaner? Like this one, but i see it is a no go with my intake.

@DKCustomProducts 2 года назад

One of the external breathers at the following link will work with your air cleaner. www.dkcustomproducts.com/diy-external-breather-systems-422.htm

@motobabesco.1842 2 года назад

I don’t see that aluminum piece with what I got for my sportster do I need this

@DKCustomProducts 2 года назад

If your backplate is flat, then this will work with it. You can email or call at the contact info below and let them know what air cleaner you have, or send a photo of it, and they will let you know if this External Breather System will work or if one of our other EBS will work with your intake. Also, here is a video that you may find useful- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_XYXScy3j0Q.html Support@DKCustomProducts.com 662-252-8828 btw, great channel you've started! 👍

@joeabbott7839 Год назад

Why not put hose to the oil tank on the filter out side

@DKCustomProducts Год назад

Once you look at what is coming out of the breathers, you will not want that going back into the oil tank. Here is a link with some photos- www.dkcustomproducts.com/overview-of-external-breather-systems-ebs.htm

@rayfigueroa834 2 года назад

Just received mine with the 587 outlaw clear cover and don’t like the AC. My leg hits it know. can you recommend other AC that’s not in my leg way

@DKCustomProducts 2 года назад

Any of the flat covers will gain you about 1/4 inch less thickness. You can see them at the link below. For many folks the 636v is positioned forward of where their leg sits. All depends on the bike and how you sit on it. Link to 636v's is at the bottom below. www.dkcustomproducts.com/interchangeable-air-cleaner-face-plate-covers-c72-308.htm www.dkcustomproducts.com/outlaw-hiflow-636v-air-cleaner-system-harley-milwaukee-eight-dk-ac-636v-m8-cs.htm

@jamesbogard272 Год назад

I want one

@DKCustomProducts Год назад

You can find our External Breather systems at this link www.dkcustomproducts.com/breather-systems-c21.htm If you have any question or need help choosing the right one please email our customer service at support@dkcustomproducts.com or call 662-252-8828. Thank you for watching!

@ericroadking7564 2 года назад

Great content nice job!!

@DKCustomProducts 2 года назад

Glad you enjoy it!

@georgegrout6995 Год назад

Do you have EBS for S & S E on Head Breather Evo

@DKCustomProducts Год назад

Dwayne will be able to help you with that question. Please send an email to his attention, or give a call, and he will let you know. Support@DKCustomProducts.com 662-252-8828

@revealingfacts4all Год назад

curious, I have a 1997 bad boy with the rubber boot that fits over top of the breather bolt. How, in your design, does the exhaust gases get through that bolt into what you call a transformer? Can you show those details?

@DKCustomProducts Год назад

I don't know what a 1997 bad boy is. Maybe a Fat Boy? In any case, only make the Transformer™ for Sporty Evolutions, Twin Cams and M8's. So if you have an Evo, unfortunately we do not have a Transformer that will fit it. However, if you do have an Big Twin Evo, the External Breather Systems (excluding the Transformer™) at the following link will fit it- www.dkcustomproducts.com/91-up-sportster-big-twin-evo-c75-119.htm

@revealingfacts4all Год назад

@@DKCustomProducts no, bad boy is a harley davidson model fxstsb.

@DKCustomProducts Год назад

Thanks man! I always referred to those as a Springer. I do see that it was marketed as a Bad Boy. You can see from the Harley designations in their model library (see link below) that it is referred to as a Springer. Sorry for confusion. The EBS's listed/linked above will work on your Bad Boy. www.dkcustomproducts.com/image/Links_2/FXSTSB.jpg

@joehansen4889 Год назад

For 245.00 bucks do i get the air cleaner assembly also?

@DKCustomProducts Год назад

You can also run the 828 Speed Fin with any of the Breather systems seen at the following link, that are much less expensive- www.dkcustomproducts.com/hose-filter-external-breather-systems-527.htm

@danhickman4323 Год назад

Will the backing plate work with the trask setup

@DKCustomProducts Год назад

The video linked below shows what the Transformer will fit on. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_XYXScy3j0Q.html If it will not fit, here is a link to others, one of them will fit. www.dkcustomproducts.com/breather-systems-c21.htm Always feel free to email or call with any questions. Thank you for looking at our parts. Support@DKCustomProducts.com 662-252-8828

@scottstubbs9913 Год назад

Do you offer a external breather setup for my 2014 FLHTCU with a stock airbox and cover?

@DKCustomProducts Год назад

Yes, we have several that you can see at the links below. Please call or email with any questions. Support@DKCustomProducts.com 662-252-8828 www.dkcustomproducts.com/twin-cam-discrete-head-breather-system-touring-softail-dyna-dk-tc-brt.htm and www.dkcustomproducts.com/diy-external-breather-systems-467.htm We also have entire Free Flowing Air Cleaners with EBS that will work with your stock cover at this link- www.dkcustomproducts.com/complete-hiflow-606-air-cleaner-dyna-softail-touring-rushmore-dk-ac606-nk-tc.htm Thank you for looking at our parts, always feel free to contact us with any questions.

@66thru68veteran 2 года назад

will my stock OEM air cleaner work with the Transformer ? I have an 2006 Road King Classic with Injection ..

@DKCustomProducts 2 года назад

It will not work with your OEM air box. You can run a 587 or 606 that the stock cover will work with. See it at this link- www.dkcustomproducts.com/air-cleaner-intake-c10-315.htm Here is a FAQ video you may find useful about the Transformer- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_XYXScy3j0Q.html

@Churros1209 Год назад

Good video

@DKCustomProducts Год назад

Glad you enjoyed it! Thank you for commenting! 👍

@robertbennett2586 10 месяцев назад

Will this fit a 1999 super glide FXDX? If so, I want to order 1 now.

@DKCustomProducts 10 месяцев назад

I am sorry it does not fit your year model bike. We do have other External Breather kits that will work with your year model, you would need to call our customer service so that we can help you get the correct parts! Support@DKCustomProducts.com 662-252-8828 Thanks for inquiring about the parts and for commenting!

@robertbennett2586 10 месяцев назад

Thank you. I will be calling tomorrow.. Great channel, keep it going..@@DKCustomProducts

@DKCustomProducts 10 месяцев назад

Thank you! I am glad you are liking the videos! Can't wait to hear from you! 👍

@robertbennett2586 10 месяцев назад

Thank you.. Had a great confo today. Hooked up with CV Pro. on my carb issue.. Thanks for the link...

@DKCustomProducts 10 месяцев назад

Glad to help! :)

@paul-b5y Месяц назад

hi i have a harley triglide 2013 103 cubic inch will it fit on my trike ??

@DKCustomProducts Месяц назад

Yes, the Transformer will fit on your Twin Cam Trike. It will also matter what Air Cleaner you have? Your Air Cleaner will need to have a flat back plate separate from any spacers or support brackets. You can see a written report on which EBS will work for your bike at this link - www.dkcustomproducts.com/getting-the-right-external-breather-systems-ebs-for-your-bike.htm You can see the Transformer at this link- www.dkcustomproducts.com/transformertm-external-breather-system-ebs-for-harley-twin-cam.htm The Transformer is also an option and fits with all of our Air Cleaners. You can see our Air Cleaners for your bike at this link - www.dkcustomproducts.com/air-cleaner-intake-c10-390.htm Please feel free to contact us with any questions; Support@DKCustomProducts.com 662-252-8828 Thank you for commenting!👍😎👍 MB

@paul-b5y Месяц назад

@@DKCustomProducts thank you for the info

@DKCustomProducts Месяц назад

Glad to help! Thank you for commenting! MB

@breedlofam 2 года назад

How hot do those breather bolts get? Teflon tape starts to deteriorate at 390'ish degrees

@DKCustomProducts 2 года назад

Hopefully your bike is not running that hot. Here is a video on optimum temperatures for the different engines- ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rWOdQOtDv6A.html That said, teflon paste is what HD uses at the factory. We have been using teflon tape (less messy than the paste) for well over a decade, and just threading it in and out "deteriorates" it-distorts it, but it is still there, it does not burn off, so it still does double duty of sealing the threads to keep oil from traveling down them, and also acts as a locker to keep them from backing out.

@breedlofam 2 года назад

@@DKCustomProducts appreciate the response! I wasn't sure how hot it got around there, so the link is helpful.

@DKCustomProducts 2 года назад

@@breedlofam Cool, glad to help!

@benhansford8524 Год назад

Your catch can needs a vreather port

@DKCustomProducts Год назад

It has 8 breather ports. There is no restriction. 👍

@josephburcell9310 2 года назад

Do you offer this Transformer EBS for a 58 mm TB? Thanks,

@DKCustomProducts 2 года назад

The Transformer will not fit the larger 58mm TB due to clearance reasons however this does not exclude your application from other External Breather options. If you are using one of our air cleaners, the Premium Hose style EBS works very well. If you wish to vent an aftermarket air cleaner externally, please send a photo, link, or part number of your air cleaner to support@dkcustomproducts.com

@mymm6327 2 года назад

What would work with the Arlen Ness Air box? (2021 114

@DKCustomProducts 2 года назад

One of the External Breather Systems seen at this link- www.dkcustomproducts.com/diy-external-breather-systems-408.htm

@johnsteen8892 2 года назад

How much longer do I have to wait for the throttle by wire version?

@johnsteen8892 2 года назад

Wait this is fly by wire. Awesome. Ordering now.

@DKCustomProducts 2 года назад

@@johnsteen8892 Awesome, we appreciate your business! Ride safe!

@colincranny5436 2 года назад

I have been trying to find a CB shorty antenna where did. you get yours?

@DKCustomProducts 2 года назад

Got the shorty antenna's from Harley.

@Old940 Год назад

J&M Radio. Maybe J&M Electronic but anyway radios for bikes.

@stevencorry5790 2 года назад

Using the Allen wrench shortways.....once the Allen wrench starts to bend....that's torqued. True story. Just FYI for newbies 😏

@DKCustomProducts 2 года назад

Thank you! Great point! 👍

@darrenlingerfelt5879 2 года назад

👍👍

@DKCustomProducts 2 года назад

👍👍

@nicholaszeller3559 2 года назад

So i currently have the DK External Breather System/DK 587 air cleaner. So would I just need to purchase the Transformer plate if I wanted this? What is the difference between this and what you have offered before? Is it worth the upgrade? Thanks.

@DKCustomProducts 2 года назад

Thanks for your business, we appreciate it. The Transformer does the same thing as the External Breather you have with your 587...it just may look a little nicer/cleaner. For functionality the only thing you gain with the Transformer is the ability to make the bike EPA compliant. Other than that it is about a more sanitary look.