How to coat your own Sublimation Blanks/Hard Substrates using PolyGloss

Подписаться 8 тыс.

Просмотров 89 тыс.

50% 1

In this video, I will be applying and showing you how to coat your own Sublimation Blanks/Hard Substrates using PolyGloss.
With the PloyGloss solution, you can save a lot of money and coat and create your own blanks.
It can be used on Ceramic Tiles, Mugs, Wood Metal, Stainless Steel Mugs, Aluminum Signs, and Water Bottles, License Plates, Clipboards, Key chains, Nameplates, Fridge Magnets, Christmas Ornaments.
Get your Polygloss here - bit.ly/3CYZqu1
Watch how I coat and sublimate on stainless steel - • Coating Stainless Stee...
Swing Design Cameo, HTV & much more - shrsl.com/2upkf
Get your Epson Eco Tank 2760 printer here - amzn.to/3f8dx6u
Swing Design Cameo 4 PRO - shrsl.com/2upkf
ProWorld - www.proworldinc.com/
Expression Vinyl - www.shareasale.com/r.cfm?u=27...
Amazon Links:
Use my Amazon affiliate links below for shopping.
Silhouette White Cameo 4 - amzn.to/3rO3Uxx
A-Sub Sublimation Paper - amzn.to/2OWARJW
Printers Jack Sublimation Ink - amzn.to/3cp1OOk
Sublimation Keychains Blanks - amzn.to/3thJ6ij
Transfer Tape for Vinyl - amzn.to/2ONvFI6
Joyinland Heat Transfer Vinyl 12'' x 20feet - amzn.to/2OsPLYc
Round Sublimation Rubber Coasters - amzn.to/3wp5d8c
Hiipoo Sublimation Ink - amzn.to/3syHsco
Round Sublimation Coaster - amzn.to/35Es9oI
Heat Resistant Tape - amzn.to/3xuctQw
Blank sublimation metal name card - amzn.to/3gIYIXD
Other videos you may be interested in
How to coat on stainless steel with polygloss - www.youtube.com/watch?v=3QGCU...
Watch how I coat on Ceramic Items - www.youtube.com/watch?v=U-ymH...
Sublimation on 100& polyester - • Sublimation Printing o...
Sublimating on Ceramic Plate - • Sublimation Printing o...
Sublimating onto a tile - • Sublimating on Ceramic...
🔴 Subscribe for more free RU-vid videos: ru-vid.com/show-UChQT...
🔴 If this content brought any value or impacted you please like and share this video.
🔴 Leave your comments below if you have tips, questions, or would love me to do another video.
============================================================
Social Media:
▶️ Instagram: / allan21thom. .
▶️ Facebook Business Page: / allan21thompson
▶️ Email: atprints47@gmail.com
If you would love to Contribution and help support the channel send to:
Paypal: www.paypal.me/pianoboy21
FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links. This will not cost you extra to use my links/codes. This is another way to support me and my channel.

Опубликовано:

6 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 573

@atprints 3 года назад

Take a look at how I coat and sublimate on stainless steel apparels 👉👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3QGCUwsdYMs.html

@erickestrada1732 3 года назад

Where can i buy

@atprints 3 года назад

@@erickestrada1732 you can get it from dyepress.com

@stephanieworkman4320 3 года назад

@@atprints is there a smell from using that stuff? Thx

@atprints 3 года назад

@@stephanieworkman4320 yes there is a smell when you are mixing the polygloss and applying it so it would be great to do this in a open space, ventilated area or use a mask if certain smell affect you.

@lilenr3499 3 года назад

Thanks. I found it earlier. Big help!

@TheCatAteMyShoe 11 месяцев назад

You just opened a whole new world for me with this video! Hello, Dollar Store!

@atprints 11 месяцев назад

Great, take advantage of it. It's truly awesome.

@janleibhan3859 2 года назад

Thank you so much for taking the time to teach us how to do this. This is the second video of yours that I've watched and now I'm hooked! And I'm impressed by how phenomenal the color transfer is!!!!

@atprints 2 года назад

Thanks very much and your most welcome.

@midnightrider9904 2 года назад

I've been watching a lot of your videos and i just wanna say thanks for all your hard work and for explaining the coating and pressing so clearly.

@atprints 2 года назад

Thanks so much for your support and comment. I really do appreciate it alot. It makes me happy when person get a clear understanding. Thanks so much .

@nolimitsteam7579 3 года назад

This is really cool. Creating your own blanks can really save you money. I love the colors also, very rich and bright.

@atprints 3 года назад

Thanks very much for your comment and support.

@flarpster3675 3 года назад

Thank you for this video!! Thank you for responding to the questions as well . I am a fan!

@atprints 3 года назад

Thanks you very much for you comment, support and for joining me on this journey.

@reign5426 6 месяцев назад

Wow, this was amazing. Thanks so much for taking the time to demonstrate this process.

@atprints 5 месяцев назад

You are most welcome. Take a look at this video where you can redo messed-up tumblers 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NlaVpag3qIA.htmlsi=zAv3U9CLUjfsgF8e

@cecesandiego7029 2 года назад

Great video..Thanks for getting right into the process. To the point and easily explained. Nice work!!

@atprints 2 года назад

I am glad that this tutorial could help you and thanks for your support and comment.

@annieclingman3615 3 года назад

Hey, you do an amazing job of explaining things AND I love your thorough answers when people ask questions in the comments section! I have PolyGloss, but haven’t tried it on ceramic yet. Thank you so much for the tutorial!

@atprints 3 года назад

Thank you for your support, subscribing and for your comments. I will keep up the hard work to bring as much content and understanding to those who are having difficulties. Thanks so much.

@danielleskaggs5399 3 года назад

Does it work on stainless steel tumblers?

@atprints 3 года назад

@@danielleskaggs5399 yes it can.

@deblighthart Год назад

Thank you so much for teaching me new techniques and a way to save money. You are awesome teacher.

@atprints Год назад

You are most welcome and thanks for your support.

@jalisaclarke5086 3 года назад

Wowww!! An eye opener for me, I learned something from this video. Awesome stuff !! 👍🏾👍🏾

@atprints 3 года назад

Thanks very much and I’m happy you learnt something new.

@jayfre5783 3 года назад

You’re a prince for providing and sharing this info and the links

@atprints 3 года назад

Thanks very much for your comment and support I really do appreciate it.

@olubukola7 8 месяцев назад

I am new to sublimation and looking for cheaper way to create projects. Thanks so much this video is exactly what am looking for. You are the best!

@atprints 8 месяцев назад

You're very welcome!

@deelayne1342 3 года назад

That was wonderful Allan. The colors are vibrant and lovely. Well done

@atprints 3 года назад

Thanks very much 👍🏾👍🏾

@nolimitsteam7579 3 года назад

i totally agree with you. This colors are really vibrant.

@HDEFMAN1 2 года назад

Wow ! that mug looks beautiful. Well done

@atprints 2 года назад

Thanks very much.

@pryceless413 3 года назад

Great job, I’ve been procrastinating on trying the polygloss. Time to give it a go. Tha ks

@atprints 3 года назад

You are welcome. Yes, give it a try and see the results you get.💪💪

@muhammadakhtar8106 2 года назад

You are great you are doing so good. God bless you

@brandonhellmer4778 2 года назад

Amazing video. Thank you for creating this and helping people like me figure out my new addiction. Indiana thanks you

@atprints 2 года назад

You are most welcome. I’m glad you enjoyed it.

@5169tasha 2 года назад

Great job!! Fast and simple.

@atprints 2 года назад

💪💪

@6godsway 3 года назад

thank you for sharing your knowledge King!

@atprints 3 года назад

You are most welcome and thank you for your support.

@veronicareid5224 3 года назад

This is really informative and I like what I saw I'm eager to try this thanks Allan

@atprints 3 года назад

Glad you enjoyed it

@diymugbiz1712 3 года назад

Awesome tutorial! This video is very informative.

@atprints 3 года назад

You are welcome. Im happy the video can help.

@jackielabadie-4822 Год назад

Thank you and I really enjoy your You Tube tutorials!!. Thank you!

@atprints Год назад

You are most welcome and thanks for your support.

@mzprttybrwneyez1 2 года назад

I absolutely love your accent. It sounds Jamaican with a touch of Irish. 🥰

@atprints 2 года назад

Thanks very much. It’s actually Barbadian. I hope you got value from the video.

@mzprttybrwneyez1 2 года назад

@@atprints Wow, truly awesome and yes I did. #newsubscriber

@atprints 2 года назад

@@mzprttybrwneyez1 I am happy you got value and thanks so much for subscribing and supporting the channel. I really appreciate it.

@annestiles5598 2 года назад

I love that cup very cool. Thanks for the video.

@atprints 2 года назад

You are most welcome.

@tonie1106 2 года назад

I love it Allan, great demo

@atprints 2 года назад

You most welcome

@beerhunter341 Год назад

I can't wait to try this. Thanks for sharing.

@atprints Год назад

You are most welcome.

@melissacallender1705 3 года назад

This was so cool and informative to watch. I also like how well you explain all the steps even if when you don't show each step (in this case when you informed the viewer that you had place both items in the oven for 20-25 minutes to cure them). But I was waiting to see you apply a design on the plate as well. Other than that, another job well done.

@atprints 3 года назад

I will be doing a separate video with the plate so stay tune.

@annieclingman3615 3 года назад

He does the plate in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dneZelb3uj8.html 👍🏻

@alvhanz 5 месяцев назад

very nice. love your detailed tutorial lesson.

@atprints 5 месяцев назад

Thanks very much and I am happy you got value from this video.

@jequeattauptonsmith2680 Год назад

This came our great-thanks for the tutorial!!

@atprints Год назад

You are most welcome and if you enjoyed that video check this one out 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NsTK5WWPWJc.html

@linboelz7477 Год назад

awesome video I went straight away and orcered some of the coating

@atprints Год назад

Thanks for your suppose and I am happy to hear you got value from this video.

@belenasturgill4303 2 года назад

Thankyou for the demo I have extra do I cover it with the container so I can use later

@atprints 2 года назад

Thanks for your question. Yes you can cover it over but you have to use it within 18 hrs. After 18hrs it will start to get hard.

@Itseemedlikeagoodida Год назад

Awesome! Thank you for sharing!!

@atprints 11 месяцев назад

You are most welcome and thanks for your support.

@cherylwilliams5179 3 месяца назад

Awesome video, very easy to follow.❤

@atprints 3 месяца назад

Thanks very much for your comment and support.

@serenityinhim 3 года назад

Thank you for the awesome tutorial! Christine

@atprints 3 года назад

You are so welcome!

@Divyeshjadhav 3 года назад

Nice explanation & helpful video thank you very much

@atprints 3 года назад

you are most welcome and I am happy I could help out.

@jamiescountryliving 3 года назад

Wow this was so cool. Thank you

@atprints 3 года назад

Thanks 💪

@MrJj2001 7 месяцев назад

Great job

@dorisgarcia6699 3 года назад

I love it thanks for share you ideas

@atprints 3 года назад

Your welcome 💪💪

@sherrywatson1283 3 года назад

Awesome job

@atprints 3 года назад

💪💪

@jordanlotus188 2 года назад

very grate work , very informative thanks. make more such video.

@atprints 2 года назад

Thanks very much for your comment and support

@fyremonte 2 года назад

Good video, thanks!

@atprints 2 года назад

You are welcome

@coryjeffreys5146 3 года назад

Dude totally awsome

@atprints 3 года назад

Thanks

@secondchancechurchofdelive7695 2 года назад

Awesome!!!!Thank you!!!

@atprints 2 года назад

You are most welcome 💪

@convenantcreations6017 Год назад

Awesome Thank you very helpful 😅

@atprints Год назад

You are welcome and thanks for your support.

@ednitamorales 3 года назад

Thank you!

@atprints 3 года назад

You are welcome 💪💪

@busyhandsveronica 3 года назад

Thanks a lot.. This polygloss is the best product compare to other RU-vidRS, introduced.

@atprints 3 года назад

Thanks very much.

@busyhandsveronica 3 года назад

@@atprints oops~ they do not ship that to Canada...Also Amazon.ca does not have that either.

@atprints 3 года назад

@@busyhandsveronica hey, did you try there official website to see? It’s dyepress.com

@busyhandsveronica 3 года назад

@@atprints oh~I will try..thanks~

@srdesigneredition6407 Год назад

I just bought mines I’m going to try it

@atprints Год назад

Awesome. make sure to let me know how it works.

@belenasturgill4303 2 года назад

Thankyou It worked yeah.

@atprints 2 года назад

Your welcome

@patrickhines4853 Год назад

Thank you ❤️

@atprints Год назад

You are welcome.

@Nik-ko9eq 2 года назад

This is AMAZING!!! I was looking to make Christmas gifts and this will save me so much money! Do they wash well/hold up well over time?

@atprints 2 года назад

Thanks for your comment and question. Since I’ve been using it. It stood up and doesn’t fade out like that. If you don’t apply it properly and rush it then it will eventually fade.

@Susan-zh5pg 2 года назад

thank you

@atprints 2 года назад

You are welcome.

@dickebk 2 года назад

Great video. Thank you for your detailed info. I was wondering how well this PolyGloss did. I'm hoping to create/experiment with my own painted blanks onto wood for my laser machine with their other product PolyNatural that is on their site. I saw some comments with being concerned about using a brush and you mentioned use it lightly. What about using the throw away foam brushes or would that cause bubbles? For using wood I would have to preheat the wood blanks anyway before painting it to create the sub blanks to release gas bubbles in the wood. Just wondering what you thought about using a foam brush. Thanks

@atprints 2 года назад

Thanks foe your support and comment. Using the solution onto wood works wonderful. I have not tried the Poly Natural as yet but I used the polygloss and paint and I did sublimate onto wood. Check out the video here 👉ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WL4nTaLQipw.html In relation to bubbles and streaks on your wood or whatever you are using the solution on, I always advice to take it gentle and light. Even if you dip a lot of the brush or sponge into the polygloss make sure to pass it light in one motion and you will over come it. When it comes to bubbles if you shake up the product or paint it on to rough you will get bubbles and you can always place someone over it so the bubbles can pop. I hope this helps 👍🏾

@leulie6554 2 года назад

Thank you for all your explanations. Do you know if there is a method to produce directly sublimation mugs ? Thank you

@atprints 2 года назад

Thanks for your question. Can you clarify a bit more when you say produce directly sublimation mugs? If you are referring to actual ready done mugs you can purchase some from amazon on different companies. If you are interested in that option i can give you some links to help.

@mercedeshernandez2844 3 года назад

Wow!! Excellent. Thank you for this video. I have a question, do you need to put the mugs or plate in the oven to cure them. Is because a saw other video and they said we need to do that. Can you help me with this doubt. Thank you in advance!!!

@atprints 3 года назад

Thanks for your comment and question. In relation to the question I really do believe you should cure them so that the poly gloss can actually bake in the mug or whatever apparel you maybe using. You can use your mug press if your doing mugs or bottles but it’s important to cure them so the polygloss care bake in the apparel. If you want to see how you can cure them with a mug press you can take a look at this video I did with stainless steel and how I cure them and sublimate onto them - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3QGCUwsdYMs.html I hope this answers your question and helps you 💪

@amandaharris9146 2 года назад

Thank you sooooo much. This was a GREAT tutorial

@atprints 2 года назад

You are welcome and thanks for your support.

@healingbreath8307 3 года назад

This is great! Thank you for sharing! Can you do a video sublimation on clear glass bottles (recycled)? Thank you 😊

@atprints 3 года назад

Thanks for your support and question. I will try my best to source and do a video on the clear glass bottle and we shall see the out come. Thanks so much again.

@healingbreath8307 3 года назад

@@atprints Thank you, Allan! That would be awesome!

@mjayy00 8 месяцев назад

Great video! I love how you explained every step in details. I tried using this on my blanks. I used high heat white spray paint to sublimate on them & the poly gloss bleeds through the print of the wrap design. I used a very thin layer and made sure it dried. Can you tell me why is this or what am I doing wrong? Thanks in advance

@atprints 8 месяцев назад

Thanks for your question and sorry for the late response. My first question to you would be, did you sand or remove the old image from the previous item before spraying it with the heat paint? If you did not sand or remove the old image first, what will happen is that once you apply the heat paint, polygloss and sublimate the item, the old image will bleed through. Take a look at this video where I explained how to redo used tumblers 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NlaVpag3qIA.htmlsi=vcrwSt6-tFF9rrIe If what i commented isnt what you were asking or referring to please let me know so i can address the correct concern.

@yellowrunkz 3 года назад

Great video.. got a question if i had messed up a sublimation tumbler if i was to spray paint over it then use this would it be able to work?

@atprints 3 года назад

This is a very interesting question. I am thinking it might work. You might have to be very carful with the type of paint that you use. The reason I mention this is because after the paint is dried you have to apply the polygloss and allow it to bake and cure in an oven or heat press. I will surely give this a test and see the outcome. What you don’t want is that when you paint the tumbler and apply the polygloss and allow it to bake that while it’s curing that the paint does come off.

@loriparsons1649 2 года назад

HI! I love your videos. I'm just now getting started with sublimation and I have order dyepress polygloss. On a mug, do you only apply the polygloss to where your sublimation will be placed or all over the cup? Thank you much!!

@atprints 2 года назад

Thanks very much for your question and your comment and support. When you are applying the polygloss on the mug cover from one end to the other end. Left out the handle and the bottom which don’t need to be coated. But coat around the surface of the mug. I hope this helps and congratulations on your new start with sublimation and polygloss . I have the links to dyepress polygloss in the e description and also I have an entire playlist with different items I coated with polygloss on my channel so check them out.

@caruamlwch8695 3 года назад

Wow -Thank you Allan-Very informative Video -No Waffling -Will you be doing Slate-Rock or Wood projects ?

@atprints 3 года назад

Yes please very soon I will be doing some wood projects and doing tutorials. I will be doing a lot of tutorials and projects so all who need to learn can watch. In terms of the slate-rock once I get I will surely do some tutorials. Thanks for your support

@k.ledford8592 3 года назад

Awesome, I was so blank! . I'm new to all of this and just wanted to find out why my sublimation paper is not transfer my design any at all !!

@atprints 3 года назад

Thanks for your comment. I didn’t quite catch your question. Can you clarify for me please so I can help you ? Also if you want to chat with me you can actually direct message me on IG or Facebook and the name is @allan21thompson

@ujuo2350 3 месяца назад

Hi, thank you very much for this wonderful video. Please can this be done on an MDF wood? If yes, how do you dry it because I am not sure about putting it in the oven for 20 mins like you did for the mug . Thank you

@atprints 3 месяца назад

Thanks for your support and questions and I am so sorry for the late response. You don’t have to put the wood in an oven. Normally for wood you would need to use a heat press or allow it to dry on its own. Please take a look at this video where I used polygloss to sublimate on the wood. These steps can work ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WL4nTaLQipw.htmlsi=GZz8wcUshIjC-Z2U

@lilenr3499 3 года назад

What brand and model mug press do you use? What printer and do you have a video on converting it to sublimation printer? Where can we find that design that you used? Link, pls... Thank you for this vid, btw. Helped take away the frustration from learning we don't have to limit ourselves to whatever blanks craft suppliers carry. Am now subscribed to your channel.

@atprints 3 года назад

Hey thanks for subscribing and following and I am happy that you are learning. Now that you have subscribe to my channel go onto the videos section of my channel and you will be able to see videos of my converting an inkjet printer into a sublimation printer step by step. Also make sure to check the descriptions of my videos as I always place all the materials, tools and resources in there. I was using the HPN signature series mug press from heat press nation.

@radellesolomon748 Год назад

Thank you for this video!.. will this work on glass, acrylic or fiberglass materials.

@atprints Год назад

Thanks for your comment and support. I am actually working on trying the polygloss with glass its a bit tricky but I can not give an answer on the glass. For the fiberglass it should work and the acrylic I never tried it before.

@nomi4560 Год назад

Thanks for the video. Do the bubbles pop on their own or is there a process to eliminate the bubbles?

@atprints Год назад

Thanks for your question and for your support. Once you put on your coating give it some time, around 10 minutes to set and try to cover it over. After when you are curing it in the oven the heat will assist with popping those bubbles.

@loveu2beads752 3 года назад

great instructions! thanks! Do you now if polycrylic would work too? I have a product that I got at Michaels that is also a poly coating, water base ( pretty much the same ingredients that I might try it later to see if works. quick tip... a little mic would help wonders on your videos, so the audio wouldn't flicker so much! great job! the colors are beautiful for sure!

@atprints 3 года назад

Thanks for your comments and support. I tried polycrylic before and to be honest it did not work. When I coated the mug it looked fine, but when I sublimated onto the mug it stuck the paper to the mug and when I wash off the paper to see if the image would stay on, the entire image also came off. But please do update me when you do try it out. I also actually do have a mic but it’s just it was so far in that particular video. Recently I have gotten a clip on so it can be closer to my mouth but I thank you very much for your helpful and kind words. You can also contact me on Facebook or IG @allan21thompson so I can see your final result when you finish it.

@loveu2beads752 3 года назад

@@atprints wow!!! I will definitely try the one I have and let you know for sure. I did try it on a shirt and looked that the colors popped out better on a poly blend (65% poly 35% cotton). The only thing was that in one shirt I could notice some yellow on the area where I sprayed it... but it came out as I washed it and colors were still bright!

@dismeygonzalez 6 месяцев назад

Thanks for the tutorial! Is there a way to REMOVE sublimation coating from items?

@atprints 5 месяцев назад

Yes, there is. There are many ways, you can use paint remover or you can sand it off. I did a video where I recoated some Tumblers. Take a look here👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NlaVpag3qIA.htmlsi=zAv3U9CLUjfsgF8e I hope this helps in your journey.

@algentles9426 3 года назад

Great info bro. Could you be kind enough to post the kink where I can purchase PolyGloss

@atprints 3 года назад

Thanks for your question. Sure I can. All the information on where you can get the polygloss from is in the description area. There is a direct link to Amazon there.

@ak4710001 2 года назад

Can I do this on borosilicate glass? you're video is amazing!!!

@atprints 2 года назад

It’s worth a try and it should work. I have not tried it as yet but I have to. I think the only problem would be if you are looking to sublimate or print a picture on it you have to find the correct time and temperature as you wouldn’t want the glass to break.

@Jimandterimuncy 2 года назад

Thanks Allan! I'm a new subscriber. Love listening to your videos and accent. :) How did the cup hold up? I'm thinking about buying the Polygloss, but wanted to know if you got the same results as sublimate coated items after washing it a few times.

@atprints 2 года назад

Hey, thanks so much for subscribing and for supporting the channel. Thanks also for your question. I love when questions are asked. However, I did the mug last year February 7, 2021 and to this day I washed that mug so many times and the colors are still bright. Once you follow the steps and seal the item correctly you product will last long. I hope this helps and yes please do get some polygloss and try and let me know how it works.

@Jimandterimuncy 2 года назад

@@atprints Excited to try this! I didn't see you seal the mug after sublimating.... is there something I should put on the mug after pressing in a mug press?

@atprints 2 года назад

@@Jimandterimuncy you can use a premium clear finish which protects the outside. I didn’t use it on this because my mug isn’t really going to be bounced around and also because I am the only one using it. The polygloss also has its own protective seal within the solution but using the premium clear coat is just another additional step you can use to seal and protect the outside of the item. I have some more video on using polygloss so make sure to check the playlist on my channel and you will see a whole playlist with more polygloss projects.

@AJsMom2000 3 года назад

Looks great on the video. My question is up close, is it streaky or does it seem textured to the touch, from applying with a brush to the mug? I have a hard time finding sublimation mugs and tumblers in the shapes and sizes that I prefer to use. I don't mind the extra time involved...but, I am picky when it comes to a final product.

@atprints 3 года назад

Hi thanks for your comment and question. For the mug I did it is very smooth as if I purchased a sublimation blank mug. If a person applies the poly gloss to hard with the brush it would leave streaks or lines. This is why you have to pass the brush gently over the mug or whatever blank product you want to make into a sublimation product. If you want I’m willing to send you a video so you can actually see it more closer. You can add me on IG @allan21thompson and I can see you pictures and videos of it and much more. In my honest opinion this is going to save you much more money than buying mugs all the time especially if you live in a country where you have to pay shipping and duties. I hope this helped and feel free to ask more questions ✅

@1craftesista 2 года назад

Thank you

@kingdavid4577 2 года назад

@@atprints will it be better to spray the polygloss on? Is this possible?

@atprints 2 года назад

@@kingdavid4577 yes you can use the spray method but you must make sure you are mindful of how the spray comes out and the pressure when spraying. I’m preparing a video on spraying polygloss onto items and once completed I will post for everyone.

@tasheal1 9 месяцев назад

Hi! Thank you. Can with your method add thermochromic effect ?

@atprints 9 месяцев назад

Hi, thanks for your question. I do believe you can. However, it will be some trial and error and testing you will have to do. I am not sure of the paints or liquids you will have to use but I will research it.

@totokakalou785 9 месяцев назад

Can you do demo on clear glass? N do you feel the brush strokes or does it come out smooth?

@atprints 9 месяцев назад

Yes, I will be doing a video on a clear glass. However, the problem will be more if the glass can take the heat and I believe it would look better of the glass is frosted.

@jessicab3990 3 года назад

Have you tried this on glass cups? Can they go in the oven without breaking? Also, does does the poly gloss come with a lot? It looks like you don’t need much for each ceramic.

@atprints 3 года назад

Thanks so much for your questions. With glass it most likely will end up breaking with the heat. Let’s say you just allow the poly gloss to be coated on the glass, at the same time when you do decide to place an image on it, the heat from the heat press will most likely crack the glass. But to answer your question I have not tried it on glass cups but tried it on glass plates and because the plate is glass the images did not turn out to its full capacity. The poly gloss comes in different sizes. You can choose from 16oz up to 5 gallons. I chose to get a big bottle so I can use it for the long haul. Here is the link you can check out the different sizes dyepress.com/polygloss-sublimation-coating-for-all-hard-substrates-glossy-finish/ When I do my coating you don’t have to use so much. 1 mixture can coat a lot of items. You can coat up to 10 of more items depending on how you put it on. You brush it on light and not heavy which gives you more left over to use on other items. I hope this answered your questions and feel free to ask anymore and you can connect with me on Instagram if you wish @allan21thompson

@1043cloud 2 года назад

Hello, sorry if it was already asked but is the polygloss ok to bake in the same oven as what I use to bake food or should I buy a convection oven? Also how bad are the fumes when baking the polygloss

@atprints 2 года назад

Hi, thanks for your question, and no need to be sorry, I don't mind answering questions. Ok so in relation to baking your items with Polygloss in the same oven you use for food, I did it with mine many times and then cleaned it out. Eventually, I purchased a Hamilton Beach Oven which has the convection feature also to use for those projects. However, I recommend that you can use another oven rather than the one you cook in. Safety is always important. So yes, I would recommend you get another oven or the convection oven if you can and use that solely for Polygloss and other craft and baking projects. In relation to fumes. Polygloss does have a smell but to me, it's not a really strong smell but even in this case I always recommend using a mask, or when using it make sure you are in a well-ventilated area. I hope this answer helps you out.

@margienoble5256 6 месяцев назад

Good wI like all you videos. Ican’t find the one you sprayed painted outside and sublimated a photo on

@atprints 6 месяцев назад

Thanks for your comment and support. Kindly see the video you requested - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NlaVpag3qIA.htmlsi=lMqlvoh7Wc-Wm0WD

@kleberchapinel5807 Год назад

Hello Nice video Can o use this tecnique tô sublimate glass cups? Thanks!!!!

@atprints Год назад

Thanks for your question. Based on what the product does and the instructions, yes you can use it on glass. I am in the process of preparing a video on polygloss and glass.

@samanthayancey-archie9610 3 года назад

for a stainless steel tumbler, how do i use the ploygloss on it

@atprints 3 года назад

Thanks for your question. You will have to follow the same process. Clean the tumbler, apply the polygloss make sure to allow it to cure by baking it and it can be used.

@carolporter7094 3 года назад

Oh I’m so excited to try this. Will it work on a wine or reg glass?

@atprints 3 года назад

Thanks for your question. Base on the product and instructions it said it can work on glass. I am in the process of creating a video using the polygloss and glass to show the results and how it would work.

@JUMA7891 3 года назад

Hello good day how are you? I followed your instructions and some of my plates turned out brown where I painted the poly. Is there a way to get rid of the brown stains? Thank you

@atprints 3 года назад

Hi, I am doing fine and thanks so much for your questions. In terms of the plates turning brown this means the heat was to high or you left them in the the oven to long. I believe you will have to scrape it off and start fresh.

@princessfavourpeter2235 11 месяцев назад

Wow I'm so excited to come across this video. Please what's the name of the second chemical u added to the polygloss?

@atprints 11 месяцев назад

Thanks for your comment and support. The name of the second chemical is catalyst. It actually comes as a package with the dyepress polygloss. You can find it here👉 bit.ly/3CYZqu1. I hope this helps.

@cheleswan 2 года назад

Hi Allen, How long did the image remain on the ceramic mug, and is there any special washing instruction on the ceramic mug.

@atprints 2 года назад

Thanks for your question. From the time I did the video to this point I still have the mug and it still looks fresh and awesome. In terms of washing I would advise not to put it in the dish washer as the heat can reactivate the polygloss. I hope this answer helps.

@gogo179gogo 2 года назад

hi dear Allan, thank you for this super amazing video:) I'm wondering if the catalyst is necessary? thank you so much:)

@atprints 2 года назад

Thank you for your comment. Yes please the catalyst is necessary. its actually plays a part of the solution.

@gogo179gogo 2 года назад

@@atprints thank you so much! Gonna order everything now and can’t wait to try!!!

@atprints 2 года назад

@@gogo179gogo Awesome. Make sure to let me know how your items come out. My links are in the description where you can reach out to me on IG or Facebook.

@theantichrist6524 3 года назад

It looke good but i have 1 question . Is the cup still food grade safe to drink from ?

@atprints 3 года назад

Hi, yes you can use the mug. I use my daily if you are putting it in a dish washer you have to be careful of the temperature as it could offset the mug and the polygloss. Hope this helps.

@user-uh5cy9hu8c 5 месяцев назад

thank you so much! this is amazing! I have a question though, with this process the plates will be food safe?

@atprints 5 месяцев назад

Thanks very much for your comment and support on the channel. Yes, the plate is food-safe. However, I normally recommend you still use it as an ornament. If you use it to eat make sure you don't put it in the oven, dishwasher or microwave as the extreme heat can reactive the polygloss. However, the company did state that its approved and food-safe.

@lesanderson2791 2 года назад

To get rid of the bubbles use a little blow torch to pop them as in when you use resin

@atprints 2 года назад

Thanks for your comment. However, Polygloss is a bit different to resin. You have to be very careful when using the heat as you can burn it or offset the curing process. So to get ride of the bubbles you allow it to sit for more time than needed and also you put it in the oven to cure and it will settle out itself.

@denisej.527 8 месяцев назад

Thank you for sharing.😊 How well do you think this will work on glass?

@atprints 8 месяцев назад

Thanks for your question. I am in the process of trying this method. I do believe it can work on glass but it all depends on the method you use. For example, If you paint the glass and then apply the polygloss, it would surely work. If you just apply the polygloss to the clear glass and then sublimate, I am not sure.

@strada570 3 года назад

Great video Allan! Thank you for sharing. Can I use an airbrush to apply the PolyGloss?

@atprints 3 года назад

Thanks is for your comment and support. In terms of the airbrush I never tried that option but I think it’s best to use a brush or sponge and the reason I say this is because when applying the solution it forms bubbles and using a spray bottle or air brush may cause a lot of bubbles. You want to avoid creating bubbles as much as possible. If bubbles are caught on the items it will be hard to get them out. Also if bubbles are formed and the items are baked/cured with the bubbles on them, then it will stay that way forever. I hope this helps.

@strada570 3 года назад

@@atprints You help me a lot! Thank you!!

@atprints 3 года назад

@@strada570 you are most welcome.

@zekewheel 2 года назад

if you do this on tile can you use as hot plate for hot pots? thanks

@atprints 2 года назад

Hi, i do believe that it should be able to with stand the hot pots on them. I never tried putting hot stuff or cookware on top the tile before. But once you follow the process correctly it should hold up. If you are looking to use this method to sublimate onto a tile it can work. See the video i did using the same process and using a tile 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NsTK5WWPWJc.html

@thelmaguzman1352 Год назад

Amazing !!! How do you keep the picture from scraping or coming off through washes or anything else ? Do you make a barrier after or 😊

@atprints Год назад

Thanks for your question. With Polygloss it is recommended that you do not put it in the dishwasher. Putting it in the dishwasher can reactivate the polygloss due to the heat and it could spoil the design. I hope this answer helps.

@pulentsoane6706 Год назад

I have bee trying this method even with simple wash the design fate away what could i be doing wrong?

@tinapaananen998 2 года назад

Love your videos. If I don’t have an oven to cure the Polygloss can I use a mug press?

@atprints 2 года назад

Thanks for your comment and your support, I really appreciate it. Yes you can use a mug press. Here is another video where I coated some bottles and used the mug press 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3QGCUwsdYMs.html Hope this helps.

@amjadmasood7658 3 года назад

Dear u r great I want to ask u if I want make coating in milki white which type of colur ( brand name and online store) to be used. Thank u

@atprints 3 года назад

Hi, can you clarify what your were trying to ask so i can help?

@hgilmw 2 года назад

Allan Thompson if i purchase Ceramic Plates do i have to coat it to do sublimation on it? Thank you

@atprints 2 года назад

Thanks for your question. Yes if you purchase ceramic plates you have to coat them to do sublimation. However, they are some plates that you can purchase that are already coated and prepared for sublimation. Hope this answer helps.

@DenisePoole-Closet-Crafts Год назад

Great video, thank you. I do have a question. After many washes, is it still looking the same?. Just wondering how applying the sublimation yourself stands up to many usage.

@atprints Год назад

Thanks for your question. I honestly had my mug for over a year now and the quality is still the same but I guess it also depends on how people treat the item. I always remind persons not to put it in the dishwasher as the heat can reactive the polygloss. I hope I answered your question.

@DenisePoole-Closet-Crafts Год назад

@@atprints Thank you, that is good news.

@atprints Год назад

@@DenisePoole-Closet-Crafts you are welcome.

@hgilmw 2 года назад

Hi Allan i got the Dyepress and im trying to do the coating on a plate today. Did you wait an hour or 2 for the coating to dry? I was looking at the Dyepress video on their site and the lady said to wait 1 or 2 hours for the coating to dry. then cure it before pressing on the photo? Thank you again for your help sorry to bother you. I will post the plate so you can see it if it come out right :-)

@atprints 2 года назад

Hi thanks for your comment and your question. Please don’t feel or think you are bothering me because you are not. I actually do like when persons ask questions and interact with me. Yes, I would love to see the plate. You can find my Instagram and Facebook links in the description where you can reach out to me. In relation to the plate I follow the same steps in my video. 1. Poor on the polygloss 2. Paint it in with a paint brush 3. I use a container and cover over the plate so any bubbles that may pop up can pop on its own and that for around 10-15 minutes and I would check in between. 4. Once that 10-15 minutes has passed I’ll put it in my oven and the key here is really the temperature and monitoring it. 5. Take it out the oven after 15-20 mins and let it cool. But don’t leave it in to long or it will burn or turn brown. I have a video on how I sublimate onto a plate which I coated with polygloss. You can check it out here 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dneZelb3uj8.html I know this response was long but I hope it helps.

@elizeduplessis7920 11 месяцев назад

Awesome Awesome. Thanks so much. But please show us how you do your plate😊❤

@atprints 11 месяцев назад

Thanks for your comment. Kindly see the video of the plate here 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dneZelb3uj8.htmlsi=6QluiT0RnGHqNn36

@medakfiles 2 года назад

does this work same way on a 160z pint glass for beer

@atprints 2 года назад

Thanks for your question. When it comes to glass it’s a bit different as you can coat the polygloss on but in terms of sublimating the image may not fill come out as you wish since the background would be glass.

@elainejacobs6198 10 месяцев назад

I was wondering if you can still use them to drink and eat off of after you apply that coding to them? Also wondering how it will hold up to the dishwasher, and the last thought is can you use a heat gun instead of the oven?

@atprints 10 месяцев назад

Thanks for your questions. You can use the cup to drink from and the plate can be used. The company noted that the Polygloss is FDA-approved and its food safe. However, I always recommend, when it comes to the plate, use it as an ornament. The cup can be used as normal. I also highly recommend not putting them in the dishwasher because what you don't want is the heat from the dishwasher to reactive the polygloss. When sublimating, it's best to use an oven and not a heat gun. you want even heating and temperature when the item is baking.

@hersonherrera9701 10 месяцев назад

is there certain type of poly gloss for sublimation or i can use any polygloss for this

@atprints 10 месяцев назад

Thanks for your question. I would start by asking what type of sublimation you are interested in doing. If you want to sublimate cups, mugs, bottles, etc. you can use the dye press Polygloss where the link is in the description of this video. Otherwise, you will have to tell me what other type of sublimating you are interested in and I would be able to try to guide you accordingly.