How to communicate Low cost PLC with OP320-A HMI 

Сразу не понял кто наполняет регистр,потом прочитал мануал,что М8013 это генератор на 1Гц) Спасибо,было познавательно!

thanks for this video, very informative video,,, i have a question,,, do the set value from HMI retain/save to PLC after power off both PLC and HMI?

Very helpful ! Thanks for sharing.

Wonderful bro...used for me...

nice video

Interesting. How? I thought you needed to set up D8120, then SET M8196 and RST M8125 as it is written in the manual. Why does it just works?

Hello sir, thanks for this tutorial video and its really help. Can you do a tutorial for integrating barcode scanner with Fx3u PLC.

Hi! First of all thank You for the video. Some days before arrived my HMI panel too. I had a big frustration about my HMI device. I'll tell You what happened. Maybe the story will be useful for the others. I didn't know that the version of HMI is very important thing in this case. My OP320A is an early version (v.6.5) so I can use that version of this program, which especially written for v. 6.5. Finally I found the suitable version and I made a small simple screen arrangement with it. I downloaded the software to the HMI, but after downloading the screen was empty. I couldn"t see any of the downloaded elements on the screen. I didn't know why. In earlier I used an Array SH300 type HMI device, which was very similar to OP320. At SH300 after downloading immediately appeared the designed user screen on the HMI. At OP320 there is different the method. After long suffering I though, lets try to connect HMI to the PLC. The downloaded user screen suddenly appeared. Now I am happy :) Greeting from Johnny

hey hi can you please help me this hmi and plc can run 6 contactor time wise

Do you have information pin connection Between plc FX n HMI

Hello sir thank you for the video. How to connect plc op320 hmi and servodriver in jog mode,speed mide .

Hi. sir I find a lot of software program to download program to HMI. please give me your program you use it web to download program.

I need the program example in each 150 mm length servo on for 2 sec off and on for 150mm

Giod

Sir can i get usb to serial cable driver because we havr purchased same cable but it can't run on prolific driver

Hi I have performed step by step all your info works everything is activated the outputs of the plc and the memories. there is no exchange of D parameters from PLC to OP If I change the D parameter on the Op it works, but there is no PLC count. can you help me thank you

Software name to hmi please..

Hello, I have the same plc and hmi but I cannot connect the plc with the hmi, I already did all the steps indicated in your video but it is impossible to connect, I have an fx3u and an op320a. but i tried with a fx1n and if it connect

I just bought an OP320A, it was made in 2022. I can not for the life of me get it to download to the unit. I've tried 6 different USB->RS232 convertors. Made my own cables. Used the supplied cables. Used versions 6, 8 and 9 of the software and I can't get the thing to download. The unit beeps and says "downloading" and then the software times out. It's very frustrating. Anyone else have this problem?

passwoe