Configuring the PowerBeam AC 620 access point can be done through its web interface. Here are the steps to configure it.
➜ Connect a computer to the access point using an Ethernet cable.
➜ Open a web browser and enter the IP address of the access point in the address bar. The default IP address is 192.168.1.20.
➜ Log in to the access point using the default username and password. The default username is "ubnt" and the default password is "ubnt".
➜ Once you are logged in, go to the "Wireless" tab and select "Wireless Mode" from the dropdown menu.
➜ Choose the appropriate wireless mode for your network, such as "Access Point" or "Wireless Bridge".
➜ Set the SSID (network name) and wireless security settings, such as WPA2 encryption and a strong password.
➜ o to the "System" tab and select "System" from the dropdown menu.
➜ Set the time zone and other system settings, such as the hostname and administrator username and password.
➜ Finally, click "Save" to apply the changes and reboot the access point.
✅ Subscribe My Channel @bytetechnical
✅ Follow on Instagram / byte_technical1
✅ Follow on Facebook Page
www.facebook.c...
🎜 Music
Music by: Bensound.com/royalty-free-music
License code: GWFYCYGODDNWKQJO
#accesspoint #bytetechnical #powerbeam #ubiquiti
15 окт 2024
