How To Connect High Pressure Washer To A Garden Tap | Karcher Pressure Washer Install 

Thanks

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ru-vid.comUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

Thank you. Youve saved me from buying an expensive hoselock i can just buy a hose and seperate connectors. Thanks a lot for making this

thank you - excellent video; the vital matter of connection between machine and hose is a step other videos overlook.

Thank you very much. I was going absolutely crazy. I purchased my K2 from B&Q last Saturday. The manual that came with it is pathetic. Much appreciated your video. Regards.

At last - a video that tells me what I need to know...

thank you for this- good instructions, calm and with no life story or aside information :)

'Both connectors have a stop feature, so make sure you are getting the right connector'. You should explain what the 'right connector' is and what both of these connector types are and why it's important. Connecting an 'aquastop' type connector will damage your pressure washer. Only use the 'aquastop' type of connector to a garden hose end attachment. You need a straight through hose connector on both ends for a pressure washer. You also need to run the pressure washer with the power OFF and the water supply connected first to remove any air locks which can also damage your pressure washer.

A lot more helpful than the pitiful manual it came with.

Thank you. The "now attach to pressure washer connector " - that is my problem. My machine does not seem to have a way to fit it on. It was useful however to see that i need to buy an additional connector.

No men in my house, and the hose kept flying off the tap! Thank you for explaining 😊

Very good and straight foreward video

Thank you so much! That’s the exactly the video I was looking for.

Excellent video, very well made. I've seen many videos regarding this, your is clearly the best. Thanks very much. Very helpful.

Thanks for the useful, easy to follow tutorial. Peace to you too, bro.👍

Official advice is to run the water through the system before turning the pressure washer motor on

Thanks I got stuck on this last bit!! Then I found your post.

Love the video and those connectors are exactly what I need but you never said the situation name of them What do I search for pls?

Simple yet effective video thank you

do those connectors that youve shown on video come in the box when you purchase one of those karches pressure washers ?

You are a life saver thank you :)

lol u just saved me going mental- tks..

Tks ,,sorted now .

10/10 best video.

I have done everything right I have a karcher hose connector but it is still leaking?

Thank you for this

A trick I do is to tie a cable tie over the trigger and control the key washer by the power button on the unit. I find my hands ache after 5 mins otherwise

thank you

Thank you so much for that 🙏

Whenever I turn my jetwash on and my hose pipe on my hose pipe always bursts out? What do I need

Great video, thanks man 🙏🏼

God forgive me but it's so refreshing reading the posts others have left about hose pipes bursting off the tap / problems with hose connectors. I bought a karcher years ago and effectively couldn't use it because of all the problems. My outdoor tap originally came with a brass hose connector. I was advised to take it off and use the plastic one that came with my garden hose. Now I can't get the plastic one off and the (stronger) brass one is sitting in the kitchen doing nothing. Why can't everything be universal? Thre are too many compatibility problems. I give up!

Brilliant! Thank you 🙏

Hi, can the power chord come into contact with water without causing electrocution?

Do you need am aquastop connector at the tap or not

Thanks. Very helpful.

Turn on the water source… Do not turn on the pressure washer immediately… Check for a constant flow of water out of the gun, provided the gun trigger is pressed to on mode… Constant outgoing flow means all air is out… Now turn on the pressure washer.

I have a question. I have a karcher k5, I plug it in a bathroom faucet, but, the pressure is too high from the faucet and my hose gets disconnected either from a karcher plugin or the bathroom one so it makes a mess every time I try to use it. What do u think I should do?

How do i attach the hose end with yellow nozzle to garden tap..i have brass or plastic attachment to the tap...just pushing isnt enough

Thankyou for this very helpful

FYI Karcher recommend NOT to use aqua-stop connectors !

Where to get the bit that attached to the water supply ? As well as the green thing to go onto it ? Dose the yello hose adapter come with the machine when you buy it ? Thank you so much

Porque a mi se me salta el tubo del conector por la parte conectada de la karcher

I noticed using a normal hose is useless on power washers, you need to buy a thick NTS Pipe, this stops the pipe from squeezing and putting strain on the motor.

do u need to use the stop connectors I have 2 free flow ones and mine is connected to my kitchen tap with a hozelock connector and when I take my hand off the trigger it blows the connector off the tap

Boujour existe t-il les robinet de cuisine et salle de bain et extérieur de la maison 🏠 connecté avec téléphone portable pour pouvoir fermer ou ouvrir l'eau ? Merci ++

What about pipes that have no thead? Do you have a video on that sir?

I do this but at the attachment of the pressure washer the water hose clogs up and hose gets bigger, water won’t go in the machine

can I do the same with the tape from kitchen ? or it must be garden tap ? Thanks

Will it work with hozelock?

Just got a k5 145 bar and I used it for the first time and I use it for about 5 seconds then I get no pressure? Any help please

mine was still leaking from the tap area :(

✌️ piece bro

Hey I've only got 1 force stop connecter, but the place I bought the outside tap from said it has a value check in it. So will I be able to put just the one on the karcher side. Thanx

From where the high pressure will be available ?

My suction hose keeps blowing up due to back pressure.

What’s the name of the connector at 1:35? I need that to connect my pipe to the pressure washer but I’m clueless about this stuff

What is the point of some hose connectors having a stop feature 🤦‍♀️ I can’t use it because the water isn’t coming through the hose

my gun is not coming with pressure, any helps?

Karcher 2021

Karcher worst company they make many models dont includes hose or connectors and retail stores have no clue how to connect it

Thanks