Very cool blueprints dude!!! Up and running using ZHA in no time - works like a charm with a colour hue bulb and music assistant. Let us know if/when the other functions like double and long press are supported. W
Beautiful and clear presentation. I also have a problem and please, if you can help me. I have 3 Bseed zigbee switches model TS0001 Zigbee Manufacturer TZ3000, switches that I integrated into zigbee 2mqtt through home assistant. The 3 switches must turn off/on only one bulb. I'm a beginner in HA and I don't know how to pair them to work. They can be paired in the Smart Life application, but I have HA with a SkyConnect coordinator. In the hope that you will receive help, thank you in advance.
I connected the 3 switches to the electric current according to the diagram and they receive current, after which I integrated them individually in 2mqtt and they are visible. I can access them from zigbee 2mqtt but only one switch turns on/off the bulb both from 2mqtt and physically. I tried an automation but I didn't manage to make them work. Maybe I don't explain it properly, but they have to be paired or automated to work. The 3 switches are located in the same room and must control a single light bulb. Thank you very much for your help.
@@capatarunicusor4842 so first thing if the three switches are visible in Zigbee2mqtt, then they are connected. Now check in Home Assistant. They should be visible under the mqtt integration. I am assuming Zigbee2mqtt is connected to Home assistant using mqtt. If not, then check my channel for a video about Zigbee2mqtt. Once you see the devices in the mqtt integration then you can automate the switches.
I run HA system on an orange pi5 plus with supervisor, in which I have the MQTT broker. The 3 switches appear in the MQTT broker with the function they have. Do you suggest that their automation (multiple association) be done in the MQTT broker (integration)?
I am not sure if I understand you correctly. I think you mean the devices can be seen in the mqtt integration in Home Assistant. If so, then you can directly use it as a device in your automations.
Would this also work with other zigbee dimmers? I'm using an Aqara H1 dimmer knob connected through Z2M. Sadly there is no response when turning the dial using the blueprint in the video.
I've installed the Media Player Blueprint and it appears to all be working, but when I try to perform any interaction with it it fails, with this error message in the Trace Timeline. Don't suppose anyone has any ideas? Triggered by the event 'zha_event' at 6 March 2024 at 16:06:07 Define variables media_player_entity, secondary_media_player_entity, command, cluster_id, endpoint_id, mode, steps, step_percent, secondary_step_percent, media_player_is_on and secondary_media_player_is_on Stopped because an error was encountered at 6 March 2024 at 16:06:07 (runtime: 0.01 seconds) UndefinedError: 'dict object' has no attribute 'entity_id'
Which type of integration are you using? I looked at the blueprint code. It looks like something related to the media player. can you check in the developer tools, if the media player entity id is avaialable?
@@SmartHomeCircle it is connected with ZHA... Rotation are noted in ZHA device log... Signal strength is updated... But when setting up the automation I face this error. It was working fine until few days ago.