Visit the @RCAantennas website: www.rcaantennas.net Download the Free RCA Signal Finder App: •RCA Signal Finder for iOS: apps.apple.com/us/app/rca-sig... •RCA Signal Finder for Android: play.google.com/store/apps/de...
I have like 80 free channels. Comet TV being the best! But I get football, movies, TV shows all free. You have to put the antenna itself outside, high up preferably with nothing above it. The higher up the better your line of sight to the broadcast tower. Next scan for the channels on the TV, all TVs have this option. Just go into the TVs menu system. Most TVs now have basically the same looking menu, the option will usually be in the middle. Select 'digital' and 'antenna' scan on the TV menu. The TV will then scan the channels you get. If you do a scan with the antenna outside you'll get a bunch of channels. You do it inside you'll get half the amount of channels. And the channels you do get will look like a DVD video when the disc is scratched.
I have installed several outdoor antennas. Indoor amplified antennas are useless. Amplifiers are good at boosting received signals for splitting. Amplifiers will not boost a signal you can't normally receive. Rabbit ears are just as good or better than these flat antennas, and you can easily rotate them. There is no such thing as an HD antenna. Antennas capture carrier waves which have basically been the same since the beginning of broadcast TV. I did install a 50 element RCA antenna last week. It's 23 feet up and it is picking up a low VHF station 60.6 miles away and all the surrounding UHF stations without a rotor. I am not using an amplifier and it is split to 4 TV sets. In a pinch, an omni directional FM antenna will pick up TV stations up to 25 uninterrupted miles away.
It's not finding any channels just keeps searching for channels over and over ? We got RCA Indoor outdoor antenna. No charger ? Says works on our ROKO and down streaming? Nothing?
I got both of them but the TERK Singal Finder App. Cover the 🌎 World. I have extra channel on TV. I had moved my TV antennas to the Windows. Now both of the in Tutorials Finder App. I believe it doing that to find more channel. I guess l have let connected more letting it go to these rest of the channel. Good luck to you. 😊
I am the most electronics challenged person on this planet. I need to plug something in and have it work. Or, I sit on the floor and cry. My çat understands me.
Didn't work very well, especially when you have to move it across the room to different windows to get channels. I tried the Ultra Pro Hover HD from Lowes store.
I’m going to buy this and use it in my basement for my projector for football games, is it likely this will be powerful enough? I live in the city so I should be close enough to any signals needed
I have completed all the steps several times. I do not get the channels that the tower locator says I should receive. I do receive a few channels, but only a few. For a while I had about 10 channels, but for some reason over Labor Day weekend, it got shortened to 5 channels. I think that's when 5G went live. I do not get nearly the bevy of channels that are advertised. I guess that was too much to ask for. And as far as it being multi-directional -- I don't understand, if it captures signals from 360 degrees, then why do I need to position it just perfectly towards a cell tower to get anything at all?
The antenna itself has to be high up and outside.... I'm sitting right now watching a sci fi channel from over 60 I got. But if I use an antenna inside I won't get but like 3. Try using the antenna outside.
I've installed the app and have tried moving around, but there is no blue dot. Only red. I've tried moving around in a slow circle, but the line where I'm at doesn't move.
We recommend checking your phones software to make sure that it is up-to-date. You can check the location of the nearby broadcast towers at any time by visiting the FCC website: www.fcc.gov/media/engineering/dtvmaps
The instructional video is designed to provide an all-encompassing guide for users, extending beyond mere cable connection and power supply. It details how to connect the antenna to the correct "Antenna In" or "TV" input, offers guidance on identifying nearby broadcast towers, and provides recommendations for optimal antenna placement. Additionally, it emphasizes the necessity of conducting a channel scan for accessing free over-the-air broadcast signals. We strive to offer comprehensive assistance to cater to a wide range of user expertise levels.
I cut the cord in 2008 & this RCA antenna has worked so beautifully until a month ago when I lost signal for Movies! LightTV & Heroes here in Los Angeles. I'm trying to troubleshoot but all the other channels I don't want to watch are coming in perfectly. So I'm having difficulty knowing where the problem is. Soooo sad 😣
The channel scan function is found within your TV menu settings. Unfortunately each TV manufacturer has a different way to get to the channel scan function. Please refer to your TV owner manual for those specific steps as it is a function of the TV and not the antenna.
The channel scan is a function of your TV and not the antenna. Unfortunately, each TV manufacturer has a different process on how to get to the channel scan function. The channel scan is typically found within your TV menu settings, so please refer to your TV owners manual for those specific steps on how to perform a channel scan.
It was working until it fell off. Do i have to get a tv man to fix it or is there something i can do to fix it. It has so many screws to get inside internally.
Sorry to read that the antenna did not work for you when you tried it at your specific location. Hopefully we can offer a couple tips that may help get you watching Free HDTV. First of all, we want to make sure that you performed a channel scan using your TV’s menu system. This is the most important and most often over-looked step after connecting the RCA antenna to the TV. Unfortunately each TV manufacturer has a different process on how to get to the channel scan function within its menu settings, so you will have to look at your TV owners manual for those specific steps. Also, make sure your TV input is set to "Antenna" or "Air" or something similar. Also, if you can place the antenna near (or in) a window facing the broadcast tower general direction the better your chances are of receiving a signal. It also helps when you completely uncoil the antennas cable before running the channel scan. If all of that does not work, I would check your TV to ensure that it does indeed have an ATSC tuner which is needed to receive today’s digital broadcast signals. Most TV's built around 2007 have this type of tuner. An easy way to find out is by finding your TV model number and doing a Quick Google Search for your TV model number. The type of tuner should be an “ATSC” (not an NTSC) as mentioned above. If it does not, you will need to purchase a digital converter box. If you can send us a quick email to RCAAntennaHelp@voxxintl.com with your zip code we can take a look to see what other specific information we may be able to provide to help you get watching Free HDTV.
It seems you're already receiving a substantial number of channels. To possibly increase that number, make sure your antenna's cable is fully uncoiled, and rerun a channel scan.
i did all the steps...did the scan, it said there were 22 channels available....But when I go to guide, its pulling up a bunch of channels under sling..And it wont work without wifi
@ 5:08 into the video, "2.) Antennas don't like steel and concrete" referring to buildings, skyscrapers, bridges, etc. These materials are dense and quickly rob signal strength.
I lived in a two story apartment for two years with enough OPEN space to face toward source - living in So Cal is helpful - This product was AWESOME - Had to program it write and scan it correctly - then got over 100 channels!! Miss Grit and COVI tv!!
@@garyjohnson9895 TERK Singal Finder is more Advance it over Channel around the 🌎 World. I got l extra channel 🇫🇷 France Channel TV. I live in Georgia. I was Shock. I wish more channel come back on my TV. I have Few Basic Channel. I might change it since l have a RCA Antenna with Remote. But l have Smart TV. How l got this channel. I moved my Antenna closer to my Window. Get a Stronger Singal. I did wish was funny to me. But it better than nothing. 😊l am glad you have extra channel l wish l did. I just my RCA Singal Finder. Well might used both of them l have channel for around Nation and the other around the World. 😊
summer ivory, I did everything and didn’t get a single channel either. Nothing., and I have several towers less than 9 miles away using antenna that’s supposed to see 50 miles.
mine says "video format is unsupported" *its not the first time it said that* Electronics make me suffer :/ EDIT: My sis bought 2 of those shitty antennas from china.. smh
El intesante que muestran el vídeo de una antena que no tiene nada que ver con la que compre. Es una porquería, solamente llega la señal de los canales de Salina Priego. 🤮
The signal strength from your local broadcast towers, at your exact location, is the major factor on whether an antenna can receive a signal. No antenna will receive a signal that isn't there. There are some locations where it is difficult to secure a watchable signal due to other factors. Some of those other factors include things such as the surrounding terrain, whether or not you have a line-of-sight to the local broadcast towers and even the materials used in construction of your dwelling have an impact on the signal strength indoors. Typically, if you can place your antenna high up, near a window that faces the direction of your local broadcast towers, you will likely have better luck getting a signal. Always remember to rescan for channels through your TV menu settings any time you move your antenna. If you did not rescan for channels after relocating the antenna, any new and expected changes in channels/reception would not be accurate and would likely be much worse. If you can send us an email at RCAAntennaHelp@voxxintl.com we would be glad to assist you in determining which antenna would be best for your location.
Have you performed a channel scan using your TV’s menu system as noted in the Quick Start Guide of the antenna? This is the most important and most often overlooked step after physically connecting the antenna to the TV. Your TV will not recognize any channels unless this step is performed. Unfortunately, each TV manufacturer has a different process on how to get to the channel scan function. The channel scan is typically found within your TV menu settings, so please refer to your TV owners manual for those specific steps on how to perform a channel scan as it is a function of your TV and not the antenna. The channel scan on some TV’s will take some time so please be patient. One the channel scan is complete, you should be able to view channels on your TV.
They make it look so simple. It is anything but. A totally user UNFriendly device. I can’t even get it started, as my TV might be too old for a “channel scanner “. What useless junk! I will definitely be headed back to Walmart to get a refund.
Sorry to read that the antenna did not work for you when you tried it at your specific location. Hopefully we can offer a couple tips that may help get you watching Free HDTV. First of all, we want to make sure that you performed a channel scan using your TV’s menu system. This is the most important and most often over-looked step after connecting the RCA Antenna to your TV. Unfortunately each TV manufacturer has a different process on how to get to the channel scan function within its menu settings, so you will have to look at your TV owners manual for those specific steps. The channel scan is a function of your TV and not the antenna. Also, make sure your TV input is set to "Antenna" or "Air" or something similar. Also, if you can place the antenna near (or in) a window facing the broadcast tower general direction the better your chances are of receiving a signal. It also helps when you completely uncoil the antennas cable before running the channel scan. If all of that does not work, I would check your TV to ensure that it does indeed have an ATSC tuner which is needed to receive today’s digital broadcast signals. Most TV's built around 2007 have this type of tuner. An easy way to find out is by finding your TV model number and doing a Quick Google Search for your TV model number. The type of tuner should be an “ATSC” (not an NTSC) as mentioned above. If it does not, you will need to purchase a digital converter box. If you can send us a quick email to RCAAntennaHelp@voxxintl.com with your zip code we can take a look to see what other specific information we may be able to provide to help you get watching Free HDTV.
Just point it to the cities near you!! NO NEED FOR ALL THIS!! Just DO IT LIKE WE DID IN THE 90's, 80's, 70's, 60's, 50's, 40's,. Today's CHILDREN UNDER 40, THINK WORLD DID NOT EXIST before THEY were born.
