How to convert gasoline fueled and carbureted three wheeler rickshaw to electrical 

Dear!! We have coupled the brushless DC motor directly to the crankshaft after removing the piston and connecting rod. We have used the rickshaw gearbox and differential as it was!

On this conversion the motor that was planned to be used was 3kW motor. But due to unavilability of the 3kW motor, we decided to keep the gearbox and used a 60V brushless DC motor, the power is 1.2kW, Maximum speed is 3000 rpm, and efficiency of 90%.

Okay .thank you ..but if I may ask does that mean if you got the 3kw motor , you would have taken out the clutch and manual transmission?

Okay .thank you ..but if I may ask does that mean if you got the 3kw motor , you would have taken out the clutch and manual transmission?

Yes! The clutch and the manual gearbox are all re used.

Thank you!

The conversion was designed to run at top speed of 50k/hr with 3kw motor!

With the current configuration it was driven at maximum speed of 50 km/hr.

@@TheAbJGarage thats good speed for passenger business around city areas. i recommend.

The conversion kit was actually a donation to us for research purposes.

Noted! Thank you very much!

Haven't really! We made this only for demonstration purposes and to make further study on it.

The motor was actually a 60V brushless DC motor, the power is 1.2kW, Maximum speed is 3000 rpm, and efficiency of 90%. It was actually donated to us and therefore I am not sure about the current price and where to buy one. This one is removed from an electric three wheeler axle.

We haven't started commercial conversion yet! This one is actually done for research.

Dear! We have used the original rickshaw's transmission as it is, so we start the motor with gearbox on neutral, there is no load on the motor when starting and as a result there is no exaggerated inrush current observed. We have not use additional current limiter. Thank you very much!!

Thank you very much dear! It's very good to have you here! On this conversion the motor used is a 60V brushless DC motor, the power is 1.2kW, Maximum speed is 3000 rpm, and efficiency of 90%. We have used five 70 AH batteries to drive the three wheeler.

top speed on the road please??

Where availabal this convertion kit, what is the price, i am from sri lanka

The motor was actually a 60V brushless DC motor, the power is 1.2kW, Maximum speed is 3000 rpm, and efficiency of 90%. the designed and proposed motor was 3kw, but we couldn't find that one and we decided to go for 1.2kw.

Actually it came from South Korea. A colleague of ours brought it.

NO it doesn't have! This is a simple conversion done to demonstrate conversion to electric.

Yes! we have used the previous gearbox that came with the rickshaw!!

ሰላም

I want to know the components of an electrical circuit

And I want to complete the previous video and complete the rest of the group

Battery life is actually dependent on the way it is discharged, if severe load is put on the rickshaw, it might last about two years, if taken care of greatly, it could last about five years.