No video :(

[HOW TO] Convert Manual Crank Windows to Power Windows - 2016 Silverado W/T

Подписаться 14 тыс.

Просмотров 203 тыс.

50% 1

This video shows how to install a power window conversion kit for a 2016 Silverado. It should be similar on other vehicles that were equipped with crank windows form the factory. Don't forget to lube up the gaskets on the sides of the window track, to make it slide up and down easier.
Check out my Amazon Store Front!
www.amazon.com...
Here is a video showing how to properly install a fuse tap:
• How to tap into your c...
2 door Power Window Kit here: amzn.to/2tF4wwO
4 door Power Window Kit here: amzn.to/2SiqnCv
Rubber Gasket Lubricant: amzn.to/2vzbB2s
Buy the Fuse Taps here: amzn.to/2sLDxiB
Replacement Door Panel Clips: amzn.to/3oTs0Vy
Check out my Amazon Store Front!
www.amazon.com...
Work Gloves: amzn.to/37jel2a
Milwaukee Impact Wrench: amzn.to/2RgJJJ5
Makita 12v Impact and Drill Set: amzn.to/2TW5gIP
Makita 18v Impact and Drill Set: amzn.to/30GVyLy
Makita Drill Bits set: amzn.to/37ie538
Go Rhino! Digital Pressure Inflator: amzn.to/2G8x6t8
Dewalt Socket Set: amzn.to/2GdmUzq
Craftsman Torque Wrench: amzn.to/30GZzQd
Trim Removal Tools: amzn.to/37gjRSR
Oil Drain Pan: amzn.to/2vbQZ08
Oil Pump: amzn.to/36fxyAf
Shop Towels: amzn.to/2NLimok
Chemical Guys Inner Clean amzn.to/3azFvDE
My Camera: amzn.to/38uDnLU
Get Amazon Prime: amzn.to/2RdYigg
--As an Amazon Associate I earn from qualifying purchases.
==========================
Timestamps
0:00 - Introduction
0:42 - Unboxing
1:57 - Door Crank removal
2:43 - Door Panel removal
4:19 - Finding a mounting location
5:51 - Passenger side Door Panel modification
6:52 - Motor spline adapter
7:48 - Motor mounting and locking clips
10:51 - Window Switch install and wiring
13:46 - Wiring into cab
15:17 - Passing wires to driver side
16:17 - Driver side motor hookup
19:44 - Driver side wiring into cab
22:24 - Driver side door panel modification
24:06 - Power hookup
26:17 - Function Test
27:43 - T-Crank & Door Caps
28:48 - Ending
=========================
#ChevySilverado #chevytrucks #SilveradoSierra #FonduPotsGarage #powerwindows

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 259

@fondupot 5 лет назад

This made my work truck so much better. Power windows are a must have! I know this is a long video, but it has a lot of useful info. Enjoy! Buy the power window kit here: amzn.to/2Nn7XyH Buy the Fuse Taps here: amzn.to/2RaSYJs

@dontworry8669 4 года назад

I did it the driver side worked but the passenger side rolled down but only went half ways

@ImHim6Fifty 4 года назад

Fondupot's Garage did you lube the sides and did the windows eventually work a bit faster? Any update videos?

@fondupot 4 года назад

@@ImHim6Fifty Sorry for the delayed response. Yes, keeping the gaskets on the window lubed helps tremendously. I lube them up every couple of weeks. My truck sees a lot of dust on construction sites.

@kerem7546 3 года назад

@@fondupot is there a kit to additionally make back windows power windows as well?

@fondupot 3 года назад

There is a rear window maker that has a power rear window. But it requires swapping out the entire back glass. I haven’t found a kit that makes the OEM window power. I want a power rear window though!

@jpevans1258 Год назад

WOW, three years later and your still feeling the love from this video. It was very instructional, complete, clear and concise account of how to accomplish something I was unaware was possible. I picked up a 2008 GMC Sierra WT a bit over a year ago. The only thing I don't like about it is the fact that it has crank windows. But, now I know that there is a fix and I have a guide, step by step on how to do it. Thank you for the time and effort of making this instructional video. I'm glad you thought of it first ....lol And then made a video about the process.

@fondupot Год назад

Thanks a lot! hope it works out for you on your Sierra.

@jamesj4111 4 года назад

Nice video! I can tell you took your time to make it along with putting printed instructional words on the screen throughout. Well done. I appreciate it. Thank you!

@fondupot 4 года назад

Thanks James. Much appreciated.

@Conner.sebastyn 3 года назад

I guess I'm the weird one here trying to Convert Power Windows to Manual Crank Windows hahaha

@fondupot 3 года назад

Wierdo! Lol, nah to each his own! Good luck with your conversion.

@richardrodriguez3781 3 года назад

I have the manual crank! Want to trade? Haha

@kylehoyt7478 2 года назад

Yep

@oderfhuerta6277 2 года назад

This is criminal act

@RM-rj4pm 2 года назад

Did you ever do the conversion? My truck was originally crank, was coverted to power...I want to go back to crank.

@dusk525 3 года назад

Didn't even know this kit existed. Was gonna try and jerry rig something. I just picked up a used Chevy cargo van on an auction site. Love the van other than the manual windows. Definitely gonna give this a try. Even if after a while it only works half the time and I have to hand crank the other times, I would love it.

@fondupot 3 года назад

Mine are still working. My passenger side gets suck sometimes and I have to push it up by hand. But other than that it’s great.

@a.phillips6892 3 года назад

You are brilliant! This was very involved! I didn’t think it was possible to do this! You had me at taking the handle off...😂😂😂

@fondupot 3 года назад

Haha. Thanks very much. Glad you enjoyed. Thanks for watching.

@lukeoftedahl267 2 года назад

I was obsessed with manual windows as a little kid

@fondupot 2 года назад

Haha right on! Thanks for watching

@sulaiman8192 Год назад

I really appreciate people like him .this took time ,let alone having to explain , God bless him 🤗

@fondupot Год назад

Thanks for the kind words.

@chipjumper 4 года назад

That's a good time to pull out your door speaker and make sure it has a rain shield. GM is notorious for leaving the speakers exposed to the elements and rainwater corrodes the connectors and kills the speaker. Making a duct-tape "shield/awning" over the back of the speaker will help.

@fondupot 4 года назад

Nice tip! Thanks for watching.

@luvdady 3 года назад

yeah and swap em out , speakers are cheap as can be now a days

@davidperry4013 3 года назад

I used have a 2004 Lexus rx330 with nice polypropylene cone speakers with cloth surrounds and they still sound good and the bass is very good for a factory sound system without a subwoofer bumping strong down to 35 hertz.

@slingcharger69 2 года назад

Concerning the plugs that cover window's crank shaft, you can make your own with Sugru. It's sold as a mouldable glue. It's like silly putty that turns into rubber.

@fondupot 2 года назад

Interesting. I’ll check that out. I left mine open for this whole time.

@brendamargaret4489 4 года назад

Thank you. Great info!! Good to know conversion kit exists. Appreciate you so much!!🌷

@fondupot 4 года назад

You're welcome. Thanks for watching!

@jimholmes2555 4 года назад

Shows how screwed up RU-vid search engine is. I want to convert the utterly useless power windows to reliable manual windows.

@fondupot 4 года назад

Ha! You’re the second person to comment on this video saying that. Good luck!

@jimholmes2555 4 года назад

@SLAY GAMES I'd go for it if it were my car.

@balvinm 4 года назад

Very well edited and presented. Thanks.

@fondupot 4 года назад

Bryan Morris thanks a lot!

@LordofStormsEnd 4 года назад

It’s infuriating that my 2020 Chevy Spark has manual windows and this video gives me hope that eventually I can change that, but I’m going to have it professionally installed

@fondupot 4 года назад

Hope you get it done some day! Thanks for watching.

@LordofStormsEnd 4 года назад

Fondupot's Garage thanks!

@jefferystensland1304 3 года назад

Thanks for taking the time to make this video, I just scored a 2011 siverado 3500 crew at auction and only downfall is manual windows. I was wondering about hunting down some door panels from a wrecked truck that had power windows, thoughts?

@fondupot 3 года назад

You could absolutely swap door panels and even the one window motors and track and all the internals. You’d simply just need to wire it up to get power. Good luck!

@briann6267 2 года назад

Very informative, great video! Glad I found you, I didn’t know they make such a kit for the manual windows. I’m converting my beater Nissan truck. Thanks again and take care.

@fondupot 2 года назад

Glad to help. Thanks for watching! Good luck on your Nissan!

@stephenbishop2852 4 года назад

About the same kit for my truck I think it is worth buying the only thing is the electric motors aren't that great one of mine broke within the first but I spent 80 more dollars and got the OEM window motors and tracks and I also had to extend the I have a 03 Dodge ram 1500 todoor

@fondupot 4 года назад

Mine are still going strong! But yes adding OEM window motors is another option. Thanks for watching!

@nowafnassar7280 2 месяца назад

Great job. 👍👍👍

@josifmaracine5526 3 года назад

More power.

@fondupot 3 года назад

They work just fine!

@impsquared Год назад

very comprehensive video, ty

@fondupot Год назад

Thanks for watching.

@johnforrest2654 Год назад

Great video thanks for sharing and your time!

@fondupot Год назад

Thanks for watching!

@markhelms2408 25 дней назад

Change out your factory speakers as long as you're in there...lol

@fondupot 24 дня назад

Should have! But it was a work truck. They were OK.

@perry.silverado3112 3 года назад

Hey have a question that you may or may not answer but I have a 2016 Chevy Silverado reg cab planning on buying 2 new Doors with power windows if I did that would it just plug and play or it would not work would appreciate a comment back thanks

@fondupot 3 года назад

Good question. I don’t know if the wiring inside the cab will support the wiring in the new doors you may have to run your own wiring for power.

@perry.silverado3112 3 года назад

@@fondupot Any idea how would I do that thanks for reply by the way

@fondupot 3 года назад

You could do what I did in this video and then splice the new door wiring for the windows.

@steveestrada8678 2 года назад

It won't work you will need new dashboard harness and a new bcm...

@jordanwhite4289 2 года назад

Very informative and super helpful thanks man, you got a like and follow from me. Same year and WT for me. Ill be doing this swap soon and ill be tuning into this video again for the same demonstration. Thanks man.

@fondupot 2 года назад

Hey Jordan. Thanks for the like and subscribe. Glad you found the video helpful! The power window kit is still working, albeit the passenger side window struggles sometimes, but I just done roll that one down all the way. Still think it was worth the cost of the kit though to have power functioning windows. Good luck on your install.

@kennethsaras4598 5 лет назад

Best video on youtube, thank you so much!

@fondupot 5 лет назад

Kenneth Saras thanks Kenneth. Glad you liked it.

@kennethsaras4598 5 лет назад

Fondupot's Garage where can you find that jumper wire for the fuse?

@fondupot 5 лет назад

Hey sorry for the delay in responding. I found it on Amazon.

@speedracer1945 2 года назад

I always wished cars with power windows had a handle on the door that you could use when it breaks . My driver motor went up as it would go down but not up and would tell them don't mess with my window on oil changes and they would and piss me off .

@brookskyler5327 4 года назад

Alright can I pay you to come do this to my ram 😂

@fondupot 4 года назад

Haha sure! Bring it on down!

@HappyGilmour1010 3 года назад

I was thinkin the same thing. Lol

@fondupot 3 года назад

It’s not so bad !

@brunatrindade5569 3 года назад

how much does it cost and where are u located

@NoNamesGiven_ 4 года назад

Do you notice the windows go up and down faster with the engine actually running? I've seen a few videos of this installation being done that when the vehicle is started, the windows move faster. I tried this kit on my 2004 civic SE sedan last fall (I live in Canada, I am curious to see how the motors handle -40C during our harsh winters), and I noticed the white splines that go over the crank piece - the door panel is too snug against the spline so it jams it up, I'll have to cut a larger whole around crank handle hole as so the spline can spin. I had to undo the whole project and put it on hold until this coming spring (March-April) due to rain, and try again later. You mention all this took you up to 15 hrs, and I don't doubt it. So much touch and go, it's fun but you learn it as you go. I also think that unless you have both sides connected (which is what I did to test my driver side door first), you end up with power problems, some fuse's blew. I'm doing it little by little every weekend in my condo's heated garage.

@fondupot 4 года назад

Yes, I absolutely can tell. When the engine is off, there is not enough voltage to run the passenger side up and down. Sometimes it gets stuck. But if the engine is running, I don't seem to have any issues.

@NoNamesGiven_ 4 года назад

@@fondupot I may have missed it in the video, but what was the amp rating of the fuse you tapped into? I'm doing this mod on my 04 civic tomorrow and my ignition coil is only 15amps, I'm not sure it's strong enough to power the motors. The sunroof amp (not used on my DX) is 20amp, so I'm thinking that would be enough. I don't want my windows to be always on and drain the battery, but I don't think a sunroof would be active without having the key in the ignition anyway. Lots of testing tomorow with fuses...

@fondupot 4 года назад

Original fuse location was a 10amp fuse. The fuse for the window motors is a 15amp. I have not had any problems blowing fuses.

@PROATV13rb 4 года назад

I knew there had to be a kit that could be hooked up to that window crank rod. I just put a different pair of door panels in my work truck they're all power so this would work good for me. Only thing I would have done different is the wiring at the door jamb where you putting wire around the connectorI would have got a couple pins and crimp the wire to it and put them in the empty spots of that connector:)

@vinylscorcese3435 2 года назад

Very informative! One question though: why in fact can't you keep the old manual cranks in place? Is there not enough place after installing those white adapters? Seems like most elegant solution, after all.

@fondupot 2 года назад

You’re correct. There’s no room for the factory cranks after installing the new white adapter pieces.

@tennesseehorses3866 Год назад

Awesome job

@fondupot Год назад

Cheers. Thanks.

@janierios1194 4 года назад

LOOKS LIKE A TOTAL NIGHTMARE TO TRY TO DO!!

@fondupot 4 года назад

It’s not so bad. Just takes some time and patience.

@jasonfreeman4492 23 дня назад

I have been considering doing this for my 95 Toyota Pickup, but saw some other videos of people complaining about the motors on these being weak or failing... Have you had any of those issues now 5 years later?

@fondupot 22 дня назад

Well. I don’t have the truck anymore. But the motors did start to weaken after a few years. I read that upgrading the wiring could help, but I never got around to it.

@ashleylaughter4077 2 года назад

Hehheh watching in July NC heat. But now that it's three yrs later, has it held up?

@fondupot 2 года назад

They still worked the last time I was in the truck. I just got a new work truck this week though.

@y0mama12 2 года назад

I have a 2014 Silverado single cab and it had manual windows I really don’t mind but I just hate the door panels there so bad and I want power windows to is it possible to get door panels from a junk yard and switch them out and wire it how would that work?

@fondupot 2 года назад

It can be done. I’m not 100% sure what all it entails but the wiring is probably similar. But you’d probably have to do some harness splicing to make it work with oem window switches.

@DavidTorres-qf4dd Год назад

My right side one will go down and get stuck any tips?

@fondupot Год назад

This happened to mine a lot. I had to use silicone spray on the window gaskets all the time. It helps. But I just got accustomed to not lowering that window all the way. I think it could helped by using better wires. Somehow I think the power traveling to the passenger side motor was reduced because the wiring is not the best. I never tested that theory though. And I no longer have this truck.

@elivalencia7597 Год назад

Great video

@fondupot Год назад

Cheers. Thanks for watching.

@Panda2020gt 4 года назад

Would this work in a 2014 ram

@fondupot 4 года назад

The kit is largely universal. They include many different spline adapters for different make and models. I am pretty sure you could install this on a Ram truck equipped with crank windows. Good luck! Thanks for watching and commenting.

@johndeaton1950 Год назад

Awesome video you are the man .

@abrarkhatri8257 4 года назад

Just a quick question I got the same kit as you but I got it for a 4 door window. What amp fuse did you use. I know there is a fuse in the circuit in the kit of 30 amp so when I tap in power do I use a 30 amp use also?

@fondupot 4 года назад

Original fuse location was a 10amp fuse. The fuse for the window motors is a 15amp. I have not had any problems blowing fuses.

@Sip28 Год назад

Same I was wondering what fuse did you end up using? I’m stuck at what fuse to use.

@bobearl7859 4 года назад

Catch that c clip with a rag works every time

@fondupot 4 года назад

Good trick!

@hambokshah 2 года назад

Hi, I have the same exact car and I just bought a pair of power windows OEM with the door panels and the main wire harness of the door and all the controls and buttons from a donor car. My question is, can I replace the factory door panels with the harness and plug it into the connector? and does it need any programing if so? Best regard to you.

@zbshshsjs 2 года назад

Did it work for you?

@carloscervantes8015 2 года назад

Just u conect The power in The jumper fuse and The light of The switches just is on when The ignition switch is working?

@fondupot 2 года назад

As long as your jumper fuse is on a keyed switch then the buttons will only work when the key is on. Yes.

@nyc1655 4 года назад

How is it holding up any problems?

@fondupot 4 года назад

dan NEWYORK still working great. No problems!

@kd7126 Год назад

A1Electric has complete unit for both sides which includes a new regulator and motro with direct fit for around 200.00 USD plus many switch options. The switch assembly and wiring is seperate cost. less work time and great people

@fondupot Год назад

Cool good info. Wish I knew that when i did this install. This truck was passed down to another employee for now and these motors are still working just fine tho.

@trey1sauce165 4 года назад

Still holding up fine? I just purchased, this video looks great! Covers everything just want to make sure motor won’t give out or anything like that

@fondupot 4 года назад

Yes, still working great.

@trey1sauce165 4 года назад

Fondupot's Garage unfortunately just returned mine.. I had it all wired up (took about 4 hours) turned the ignition and was excited the green light came on... I hit the switch on both windows but unfortunately it was not strong enough to roll either one up. My windows aren’t in bad shape or anything that’s why I was totally caught off guard. Huge bummer but glad it worked well for you!

@old1hit 4 года назад

Trey 806 what car you have? Thinking about doing this on my Frontier

@trey1sauce165 4 года назад

old1hit 03 GMC Sierra at the time, the kit is universal though. I had purchased it but unfortunately it didn’t have enough power to roll the window up -not even an inch. I had to return unfortunately! I heard if you kind find your truck (one with auto windows) at a junk yard it’s easier that way and more effective

@fondupot 4 года назад

@@trey1sauce165 dang sorry to hear it didnt work out for you. Mine are still working great.

@yosimarchavez3161 3 года назад

Thank you

@crxcked2ez247 4 года назад

I installed mine on the same truck as you but only my driver side works and not my passenger side ?

@fondupot 4 года назад

Make sure all your wires are connected correctly.

@crxcked2ez247 4 года назад

Fondupot's Garage I found out that the car had to be turn on and what fuse did you put on the fuse tap because my fuse keep burning out I finally put a 20 and a 15 I hoping it doesn’t burn out but great video 👍🏽

@fondupot 4 года назад

@@crxcked2ez247 Yes, my truck has to be on for the power windows to work. The original fuse location was a 10amp fuse. The fuse for the window motors is a 15amp. I have not had any problems blowing fuses.

@crxcked2ez247 4 года назад

Fondupot's Garage ok thanks for some reason my fuse was a 7.5 for the hand steering heater but for now everything works great you video helped a lot

@fondupot 4 года назад

Awesome. Glad it worked out for you.

@williamatchison6261 2 года назад

Really cool

@fondupot 2 года назад

Thanks William! Thanks for watching.

@daazndood 2 года назад

awesome video! I'm going to get this for my 2003 B-series. Is there any sort of auto-stop built in to stop the motor when the window reaches the top or bottom? Or will it just keep trying to spin?

@fondupot 2 года назад

When it feels resistance it will stop. Good luck on your install! Thanks for watching!

@daazndood 2 года назад

@@fondupot that’s awesome! Thanks for inspiring me haha

@fondupot 2 года назад

You bet! Good luck I hope it goes in smoothly for you.

@jakehirtreiter2254 3 года назад

Will this fit on any year make and model I have a 2006 Chevy Silverado 1500 extended cab and I need power windows

@fondupot 3 года назад

Hi Jake. The kit is highly universal. It comes with several adapter pieces that will fit many makes and models. I cannot say for sure if the kit is 100% compatible, but there is a reasonable expectation that it should be fine. Your 2006 will likely have a similar crank style stud as my 2016. I say go for it! Thanks for watching and thanks for your comment. Good luck!

@ajiamin2882 2 года назад

very nice job.

@fondupot 2 года назад

Thanks for watching!

@williesweetjr8713 2 года назад

Great detailed video. Curious how this has held up in two years?

@fondupot 2 года назад

They’re still working. Albeit the passenger side gets stuck going up about 1” from the top. Makes my eye twitch everytime.

@mexicoynumerosgematriascri7220 11 месяцев назад

who does this kind of installations?? I ve been looking for a professional but cant find it? also can I buy diferent panels to make it look like natural? I have a 2017 silverado

@fondupot 11 месяцев назад

Try maybe an mobile stereo or audio build shop. They have experience removing door panels and running wiring like this. I’m not sure if other panels exist.

@59771965 4 года назад

I've got a 99 Dodge Ram 1500 mine has manual windows since my doors has rust I'm going to just change my doors with the motors already in them and wire them good illustration but it looks so complicated , it's a must to have power windows it's way too much to be climbing over the seat to roll down the wi

@59771965 4 года назад

Window

@fondupot 4 года назад

Yea. Must have for me. I do a lot of driving in this truck and my passenger side is constantly packed with bags. Having power windows is so much better.

@kathysturm4251 3 года назад

Will this also work on a 2011 chevy silverado 1500 work truck single cab?

@fondupot 3 года назад

The kit is highly unlikely universal. So yes. The power hookup probably will be different

@marcelosleiman 4 года назад

Do you have to install relays with this kit?

@fondupot 4 года назад

Marcelo Sleiman no. Just use whatever harness comes with the kit.

@itamar0115 2 года назад

If you can help me please I use the same fuse you using but my still blowing any reason why

@fondupot 2 года назад

Try using a larger fuse. Go up 5 amps see if that helps

@dontworry8669 4 года назад

I did it the driver side worked but the passenger side rolled down but only went half ways

@fondupot 4 года назад

Mine does that if I don’t have the engine running. But works fine when the engine is ok. Make sure everything is aligned on the crank too. And try to lube the window gaskets using a silicon spray.

@kobe12348able 4 года назад

I got a question where would be a place that can install it for me? Like a mechanic shop or what? I’d like to get it and get someone else to install it.

@fondupot 4 года назад

A good automobile that specializes in audio/visual installs would likely be my choice. Since there is considerable wiring involved and door panel removal. They are used to that sort of stuff. Good luck!

@sterlingarcher3373 4 года назад

Will this work for any truck? I have a 92 Chevy s10. Would this work for it?

@fondupot 4 года назад

The kit is largely universal. It should fit a variety of makes and models. I would think the overall process should be similar.

@jakekransler8056 4 года назад

Can I do it with my 2011gmc Sierra work truck model

@fondupot 4 года назад

Yes should be similar install

@frankiando30 4 года назад

I have the vehicle trying to do that conversion do you think I can use the factory wires and door panels that already have the lowering and highering window button?? Instead of making a hole where you have to put the buttons? It looks a bit sketchy

@fondupot 4 года назад

You could probably do that.

@hambokshah 3 года назад

does it work with u ? I have the same idea but i want to know the result =)

@nadim2769 4 года назад

Not familiar with pickups, I'm from the UK. Did this 2016 vehicle have front manual windows? Seems shocking for a 2016 car!

@fondupot 4 года назад

Yes it had manual crank windows. It’s common on US trucks for them to have crank windows on work truck models.

@nadim2769 4 года назад

@@fondupot wow that's shocking. I prefer to think it's for weight saving and track times, but it's probably cheaper lol. I'm thinking of converting my rear windows to electric but I don't know how it's going to work

@fondupot 4 года назад

Definitely just a cost saving option. You could probably use a kit like the one in the video to convert your rear windows.

@jimyramirez9219 2 года назад

How are they holding up? Any update?

@fondupot 2 года назад

They still work pretty good. Driver side is perfect as day one. Passenger side gets stuck sometimes. I have to make sure I grease up the side gaskets on the window otherwise the dust makes it hard for the windows to go up. But otherwise. I’m pleased with how well they’ve held up.

@stormhellmc1927 4 года назад

do you know if they sell a 4dr kit want to install this in my 97 tercel

@fondupot 4 года назад

Yes, its a different manufacturer than mine, but it looks to be the similar idea. Here is a link: amzn.to/2SiqnCv

@ItsWizz Год назад

It's been 3 years. Now. How are they working?

@fondupot Год назад

I got a new work truck last summer. My company still has the truck but it’s used as a yard vehicle in a different state. Not sure if they are still working. But they were still working last summer when I still had it though.

@datmfant_9057 Год назад

how’s it holding up so far thinking of going this way not sure if making it oem is possible lol

@fondupot Год назад

They were working when I still had this truck in July 2022, albeit they are getting worn down and we’re starting to move slower. You can swap in OEM window hardware and door panels with switches if you have a donor truck. But you’ll still need to wire the motors/switches for power. But itcan be done.

@datmfant_9057 Год назад

@@fondupot do you know if i were to get a door with everything in it already would it be plug and play ?

@fondupot Год назад

@@datmfant_9057 I don't think it would be plug n play. You'd still have to do some wiring.

@kh-zf4rc 3 года назад

Im curious if this would fit my small 2001 focus? Ive been trying to deck it out lately.

@fondupot 3 года назад

The kits are highly universal. It comes with many adapters that fit many makes and models. It will likely work. But many of the steps shown in this video are going to be different. Like removing the door panels. Hooking up wiring to the fuse panel. Etc.

@kh-zf4rc 3 года назад

@@fondupot thanks for replying so quick! I will definitely check this kit out.

@fondupot 3 года назад

Glad to help. Best of luck!!

@elcompairra5548 3 года назад

I know it will probably be more expensive but cant you just replace both doors with doors that are oem that have power windows and lock unlock and just plug in?

@fondupot 3 года назад

Yes I guess you could. But you’d still need to do wiring to run the motors and switches.

@codyalt5871 2 года назад

How did the kit hold up?

@fondupot 2 года назад

Still working! My passenger window needs help going up sometimes. But otherwise it’s been fine.

@Niita01 Год назад

Will this work on a 2012 nissan versa??

@fondupot Год назад

The kit is highly universal. So it should be more or less the same steps. Just gotta figure out your wiring for power.

@timbellard8694 3 года назад

Will this work on a 01 GMC Sierra?

@fondupot 3 года назад

The kit is universal. So it should have adapters that fit the cranks to the the motors.

@theproblem9315 5 лет назад

Does it fit on a 2007-2013 silverado?

@fondupot 5 лет назад

The Problem the kit is largely universal. The steps should be similar. With different ways to hook up power. Run wires. And remove door panels. But yes it would definitely work.

@theproblem9315 5 лет назад

Thanks! You sir earned yourself a subscriber 👍🏻

@fondupot 5 лет назад

Awesome! Thanks for the sub!

@dustinterrell2899 Год назад

For my cigar fuse it's a 20AMP, if I put an add a circuit into this slot what would my accessory fuse (power window kit) amp be? Also, are all add-a-circuit wire fuses the same AMP? or would I need a 20AMP fuse tap wire?

@fondupot Год назад

You need whatever type of fuse tap that will work on your cars system. 20 amp for the window kit should be fine.

@dustinterrell2899 Год назад

@@fondupot So all fuse taps are the same? except the way it fits into the port? I have everything done except this part I can't get to work. If my cigar amp is 20 and the accessory fuse is 15amp would that work for the power windows? or would that equal to pulling 35amp? (20 from cigar, 15 from add a circuit)?

@fondupot Год назад

No not all fuse taps are the same. I’m not sure what’s going on in your case.

@dustinterrell2899 Год назад

@@fondupot Hmm. Idk. Do you know what AMP size I need for this kit exactly? I noticed you said you used the heated steering wheel. Isn't that only 7.5AMP? So I don't understand how that worked for you.

@fondupot Год назад

I honestly can’t remember. And I don’t have this truck anymore.

@AlexRodriguez-sb4wi 3 года назад

Are they still functioning well?

@fondupot 3 года назад

My passenger side window gets stuck sometimes. But they still work ok.

@jpevans1258 Год назад

Liked and subscribed...👍

@fondupot Год назад

Thank you!

@yeemodoll7068 4 года назад

Would this work on a saturn 2004? :)

@fondupot 4 года назад

yeemodoll more than likely yes. The kit is universal. It can fit multiple makes and models.

@yeemodoll7068 4 года назад

Fondupot's Garage oh okay, thanks so much!

@latisaparker7297 4 года назад

I have a ion I'm trying to convert mines now

@official.timothy 4 года назад

Will this work on a 1999 toyota corolla

@fondupot 4 года назад

goofy more than likely yes. The kit is universal. It can fit multiple makes and models.

@pabloescobar4980 4 года назад

If I just buy new doors with power windows what wires would I need ?

@fondupot 4 года назад

Pablo Escobar not sure. Because the wiring is not the same on the factory harness as the new doors you’d be buying. I don’t think it would be easy.

@MrBEli-dw4rl 4 года назад

I was thinking the same. Thinking of going to the car junk yard and grab all wiring and fitting I would need, and see how it goes.lol

@steveestrada8678 2 года назад

If it's a 2014 or newer you have to get new dashboard harness and bcm in order to use gm doors that already have power windows...

@1notears4life 4 года назад

Whats the amp number of the fuse? Can be use on any keyed fuse?

@fondupot 4 года назад

I’m using a 15 amp fuse on a keyed circuit. I would advise only using a keyed circuit otherwise the motors will be powered up all the time and might cause battery drain.

@1notears4life 4 года назад

Awesome Thanks it was helpful to know how to run it 👍👍👍👍

@fondupot 4 года назад

Glad to help! Thanks for watching.

@angelom.7823 3 года назад

Caro amico sono Angelo da Italia ho guardato il tuo video molto bello e chiaro, ti chiedo per favore se puoi aiutarmi a risolvere un problema con la mia Aveo 2012 ho montato una centralina POWER CLOSER WINDOWS ma non riesco a capire dove collegare il trigger della power windows al filo di chiusura porta sinistra, per favore mi puoi aiutare? Molte grazie

@SWFLJetSkiRiders 4 года назад

How is it working today ?

@fondupot 4 года назад

Drone Mania still great! I use the windows everyday

@user-qp1ei5yx2r 10 месяцев назад

My shits stopped rolling up and i cant seem so find any video explaining wht to do any tips?or has this happend to you or snybody lmk lmk😭

@fondupot 10 месяцев назад

Check fuses

@miles4669 2 года назад

How much is it for a job like this?

@fondupot 2 года назад

No idea. I did it myself. So it only cost me the kit. If I had to guess. Probably a couple hundred bucks depending on the shop.

@nicklindsey8926 3 года назад

Was there a harness so you could have power mirrors?

@fondupot 3 года назад

Did you watch the video?

@nicklindsey8926 3 года назад

@@fondupot i watched a good bit of it.

@fondupot 3 года назад

So did you see the part where I installed the harness to power the new motors. Not trying to be condescending. But it’s all in there.

@nicklindsey8926 3 года назад

@@fondupot I didn’t man I’ve been doing a lot of research trying to get power mirrors and didn’t take the whole 30 minutes to watch it. Was just wondering if the power Windows you installed had the harness for mirrors to plug into and if the turn signals and running/backup lights worked

@fondupot 3 года назад

This video is for power windows. Sorry i just realized you were looking for power mirrors. My fault. Im sure there is a way to wire up power mirrors, but I don't know of any way to do it.

@ImHim6Fifty 4 года назад

Great job!

@fondupot 4 года назад

H3N thank you!

@erichead021484 3 года назад

Shop quoted me 450$ to install is this a good price?

@fondupot 3 года назад

Not bad. I wouldn’t pay that much. But if you have the means. Go for it.

@davidperry4013 3 года назад

It’s the 21st century, why can’t they make them standard equipment in trucks which should’ve been done since 2003 and in subcompact cars since 2009. The only manufacturing difference between manual and powered windows is a couple three way momentary switches, brushed dc motors with worm gear boxes, 35 feet of 18 gauge wire for a single cab truck which are cheap about only 35 dollars difference in manufacturing cost. If I ran an automaker. The cheapest half ton truck would have powered windows, mirrors, and locks, 6 way manual drivers seat, a 7 inch touchscreen stereo with apple CarPlay and Android auto, 4 speakers in the single cab consisting 2 1 inch soft dome tweeters and 2 6.5 inch midbass drivers with 140w rms total and a much better and smoother sound than cheap GM base model speakers.

@fondupot 3 года назад

Little cuts add up when you sell half a million of something. But I get where you are coming from. Some people prefer crank windows though, less to go bad over time. I like having power window tho for sure. Thanks for watching and thanks for the comment.

@davidperry4013 3 года назад

@@fondupot I like to sacrifice a little bit of profits to make the customers and employees happier. The soft-dome tweeters and woofers have ferrite magnets which are cheaper than neodymium but, very good sounding speakers can be made with them. Also, the midbass has a composite basket, rubber surround, treated paper cone for moisture resistance and sound quality, and a 1.25-inch voice coil which is much better than the 0.4-inch voice coils on other base model audio systems, the tweeters have a textile dome, felt on top of the pole piece, and composite frame. A class AB amplifier with 70 watts per channel, and 3rd order passive crossovers with electrolytic capacitors and ferrite core inductors because it has to be built to a price but, it will have sound quality comparable to mid-end bookshelf speakers. The base price would be 32,000 dollars for the single cab since it's an EV. The base powertrain would be a 50 KWh graphene battery and 350 hp RWD electric motor-axle the range would be 250 miles which is plenty for a general contractor plus the contractor will plug it in every time they come home. An extra 25 KWh, 50 KWh, or 75 KWh would be an extra 1500, 3000, or 4500 dollars respectively. A 150hp front motor would be an extra 1500 dollars, a 250 hp front motor would be 800 dollars more than the 150hp front motor. The trims would be base, plus, premium, and luxury instead of a million different trims and configs to confuse buyers. The plus model gets an option for vinyl seats, not just the base model but, the plus model's vinyl seats will have texturing to more closely resemble leather, more color choices, and leather style stitching.

@jpevans1258 Год назад

Jeez, sounds like you've put a bit of thought into this. Is there a new car company coming out that I'm not aware of?

@yashthegamer4250 3 года назад

Amazing :)

@fondupot 3 года назад

Thanks for watching.

@ldwp6395 4 года назад

I wanna put manual windows in a car with electric windows

@fondupot 4 года назад

That’s a new one.

@ldwp6395 4 года назад

less electronics to rely on init

@davidfroese3979 4 года назад

Baha 🤣🤣🤣

@creativeseeher8455 4 года назад

Lol I would like to know why

@ssj10ethan32 3 года назад

Umm what a 2016 doesn’t have power windows even a 2016 base model work truck should have that lmao I have a 2004 sierra base model so I’m working to restore it and give everything power

@fondupot 3 года назад

Yea. I thought it was wild too. Good luck with your upgrades on your 2004! Thanks for watching and commenting!