How to Create Blown Glass Ornaments | Delphi Glass 

These are from Delphi Glass the COE90 Glaskolben pre-blown clear glass cylinders- just go to DelphiGlass.com and type it in the search engine. they are on sale this month :)

Use a dermal with diamond cutter

We recommend to set it at 900 F . 15 min is probably long enough but the last one needs to have the 15 min. and then not opening kiln until below 100 F.

The glass is 90 CEO

+Immortal gamaz We sell everything you need, except for the gas, to make blown glass ornaments such as the ones you see here in the video: www.delphiglass.com/flameworking-supplies/glass-blowing-kits/. We also sell flameworking tools and supplies for the water pipes you mentioned: www.delphiglass.com/flameworking-supplies/flameworking-tools-supplies/. If you go to artglasstv.com and select flameworking from the category drop down you will see additional video that will help you getting started.

+Henry & Teresa Griese You just has to get it hot enough. It sounds like you are getting a portion of it hot enough. A common mistake people make is they lose the heat on part of the tube when they are trying to heat the other part of the tube. It needs to be a "building of heat from the tip through the middle of the tube. No need to go any closer to the pipe(handle) until you get a little more comfortable with the process. The sequence goes: Wave the entire tube in the outer part of the flame for a minute or so to take the chill off so not to thermal shock. (explode) After that start heating about a third of the tube starting at the pointy end. Once this is glowing and slightly moving, move to the center for a few turns but immediately return to the tip for a few turns to prevent the loss of any of the heat that you've already soaked in. This is where a lot of people make their mistake.. The flame isn't wide enough to heat the entire tube all at once so its a building of heat and being careful not to lose any when you move the end out to heat the center.. Hope this helps. It's kind of hard to describe with words.

+Delphi Glass Creativity Center Thank you for the detailed instructions. I was trying to do more of the entire bulb then focusing on building from the tip to the center. I did go too far back as well. Thank you so much!

+Henry & Teresa Griese You're welcome. I'm glad we could help.

you sir, deserve a cookie. hahahhahahaa.

She just had a torch on it so yea

+Hummer Klein Thank you for your feedback. Here is a link to one of our class videos where student made their own glass ornaments. The end of the video show some finished pieces. www.delphiglass.com/video_view?vid=npSHxFaNpYA

Thanks again .

+Fester Blats Thank you for the feedback. You can kind of see the finished product at the beginning of the video, within the first 10 seconds. if you want to see some good finished shots click on the gallery images on this page: www.delphiglass.com/flameworking-supplies/glass-blowing-kits/glaskolben-blown-glass-ornaments-kit