How to Create Your Own Car Parts with This 3D Scanner - 3D Maker Pro Mole 3D Scanner

Подписаться 6 тыс.

Просмотров 50 тыс.

50% 1

Check out this 3D Maker Pro Mole 3D Scanner - a great way to scan car parts and make new ones! With this scanner, you can scan car parts in amazing detail and have them printed out as 3D models.
This scanner is perfect for anyone looking to make their automotive repairs or modifications easier. By scanning car parts and making 3D models, you'll be able to fix your car quicker and with less hassle!
Use Code RandyMay to save $10 when buying the Mole 3d Scanner
Mole 3D Scanner - bit.ly/Mole-3DScanner
3D Modeling & CAD for Motorsport Course: (Save $50 using this link) bit.ly/3DModeling-and-CAD-for...
Other Helpful thinks for 3D Scanning:
AESUB 3D SCANNING SPRAY - bit.ly/AESUB-3D-SCANNING-SPRAY
MARKERS FOR 3D SCANNING - bit.ly/MARKERS-FOR-3D-SCANNING
Cheap Spray-Powder - amzn.to/43LZBX1
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeri...
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMat...
Build Series ABS - bit.ly/MatterHackersBuildSeri...
Build Series PETG - bit.ly/MatterHackersBuildSeri...
PRO Series Filament - bit.ly/MatterHackersPROSeries...
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#3dPrinting #3dScanning #DIY #RandyMay #mx3

Хобби

Опубликовано:

18 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@randymay Год назад

Mole 3D Scanner - bit.ly/Mole-3DScanner Use Code RandyMay to save $10 when buying the Mole 3d Scanner 3D Modeling & CAD for Motorsport Course: (Save $50 using this link) bit.ly/3DModeling-and-CAD-for-Motorsport Other Helpful thinks for 3D Scanning: AESUB 3D SCANNING SPRAY - bit.ly/AESUB-3D-SCANNING-SPRAY MARKERS FOR 3D SCANNING - bit.ly/MARKERS-FOR-3D-SCANNING Cheap Spray-Powder - amzn.to/43LZBX1 3d Printer Filament That I Use: PolyLite ABS - bit.ly/PolyLite-ABS PolyLite ASA - bit.ly/PolyLite-ASA PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95 PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue NylonX Filament - bit.ly/MatterHackersNylonX PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA TECSONAR Tricolor PLA - amzn.to/3H79d5N Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers Build Series ABS - bit.ly/MatterHackersBuildSeriesABS Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament Amazon 3D Printing Filament: PLA - amzn.to/3gsLE9Z PETG - amzn.to/3pXjjvu ABS - amzn.to/3wsTRjS ASA - amzn.to/2RX8dtM Polycarbonate - amzn.to/3cLdr38 Nylon - amzn.to/3iNGeI2 ________________________________________________ Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ #3dPrinting #3dScanning #DIY #RandyMay #mx3

@natecote1971 Месяц назад

1:13 baking soda mixed with alcohol in a spray bottle works just as good

@modisumocustoms9374 Год назад

Mines on the way. Can’t wait to get started!! Nice video.

@randymay Год назад

Let me know what you think of it once you get it. 😁👍

@dolph-m2962 8 месяцев назад

How’s it going ? Is it good?

@shitmyhellcatsays Год назад

I took the HP Academy course, good intro to CAD. Cannot wait for my scanner to arrive.

@randymay Год назад

Good to know and let me know what you think of the scanner

@ChadMees Год назад

Great video and this is the exact reason I bought mine. I was disappointed that the luxury kit did not come in the hard case like all of these preproduction models. The software definitely leaves a lot to be desired but it works ok.

@randymay Год назад

What stuff are you scanning

@ChadMees Год назад

@@randymay I haven’t had much of a chance to scan car stuff but I’ve been scanning things like drill batteries and statues to see how well it works. I use professional structured light scanners at my job but wanted my own scanner for little projects here and there. With the professional scanners I like that I am able to perform “registration” across all of my scans with settings as I please. I really don’t like how this software runs the registration immediately after you press stop scan. I also think the software has a lot of room for improvement because the manual alignment is not as intuitive as it should be

@randymay Год назад

Yeah the software is kinda annoying at times especially if you mess a scan up and want to stop it It will go through an entire loading process before you can just delete it.

@roottv8417 Год назад

Thanks homie

@kondwanibanda4219 5 месяцев назад

What is the name of the software you are using to create 3d files

@JoseAguiloworkshops Год назад

Can you make a video how to align a part? Like align top, then the bottom. If you turn your part upside down. Thanks

@randymay Год назад

I can and that might be a good idea lol

@JoseAguiloworkshops Год назад

@@randymay thank you so much. I will be learning and trying for myself. I will be looking forward 😊

@niklas_hass Год назад

Really great video, thank you so much! Would it be possible to scan a standard BMW Mirror Cap and print it in 3D and laminate it with Carbon Fiber afterwards? 💯

@randymay Год назад

I can see you being able to do that. There will most likely be some 3D model clean up you will have to do to make sure it's perfect and that it will still mount to the mirror but I can totally see that being done

@1incutheta Год назад

Another cool toy!

@waltw918 Год назад

Randy, what are your thoughts on the RevoPoint MINI 3D Scanner, have you evaluated it yet?

@randymay Год назад

I actually have all of the Revopoint scanners and have made videos about all of them so here's a link to the mini. I also have some other scanners that I haven't made videos on yet that you might be interested in as well, so if you haven't already subscribed you might want to do so 😁👍 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-COz_eAYSXe4.html

@AlmightyAetius 11 месяцев назад

Could I use this device to scan on a large scale? Like the whole front end of a car for example

@randymay 11 месяцев назад

You technically can but it is an absolute pain in the ass to do with this scanner because of the small scan area. That being said they make a bigger one that I actually did scan the front of a car with and you can as well here's a link to the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O5Zzx1a2Xdc.html

@vdm7776 7 месяцев назад

Thanks for amazing video! Which kind of fillament did u use for your printouts?

@randymay 7 месяцев назад

I just used pla for this video but I normally print my stuff in ASA or ABS

@vdm7776 7 месяцев назад

@@randymay thanks, PLA is like a prototype only?

@randymay 7 месяцев назад

For car parts yes. PLA is more for things that aren't going to be in UV light all the time and heat. So you can use it inside your home with no problems. But if you have it outside on a hot day it will get soft and deform

@vdm7776 7 месяцев назад

@@randymay many thanks for your answer! All clear! Goodluck with your new ideas!

@SandeepSingh-43 8 месяцев назад

Can I send you something to scan. When you align the scans, and choose points, does the point snap to the scanned file?? Meaning if you had to make four scans, and you have to align it, will the point have a variation in location, or the point will snap to the scan location you choose.

@randymay 8 месяцев назад

You basically give it 3 reference points that should align and it kind of figures it out.

@the1nicko Год назад

Did you take the course? And did you like it? I was thinking about taking it too. Thanks for the video

@randymay Год назад

I'm still working on it haven't had much time as of late so far it's pretty good and a lot of the stuff I've learned are the basics that I've already learned about the program so that's nice to get a refresher.

@macan9186 2 месяца назад

what fillament type did you use for exterior parts of the car?

@randymay 2 месяца назад

ASA or ABS

@dangerous8333 10 месяцев назад

I have a 3-D scanner, and I can barely find uses for it. I have to be honest. Even as a fabricator and artist there’s almost nothing that I can’t make with a ruler and caliper. I got a good deal on it so I’m gonna hang onto it until I can find a use for it.

@randymay 10 месяцев назад

3D scanners are a good tool to get measurements quickly along with being able to capture complex shapes so you can copy them or make things to go on to them without tons of measurement and trial and error.

@limbeboy7 Месяц назад

Last I checked, a ruler is a straight line. Whatever you're cutting doesn't need a 3D printer to make

@Gorilla_Jones Год назад

Can i use this to scan my bumpers? I design parts in clay. Thanks

@randymay Год назад

Yeah you can do that but you will have to use markers so it doesn't loose track and do it in smaller parts and then align them all in the software

@Gorilla_Jones Год назад

@@randymay thank you!

@AverageGamerJoe1 8 месяцев назад

would you recommend this over the creality scan lizard 3d scanner?

@randymay 8 месяцев назад

To be perfectly honest they are exactly the same scanner with just different housings. So whatever one you can get for cheaper would work fine.

@AverageGamerJoe1 8 месяцев назад

@@randymay you are awesome for this, software is probably the same aswell I’m assuming?

@randymay 8 месяцев назад

Yes software is the same at least now it is. You can see in my video that there's an option for Creality lizard 😁

@dkrawk8309 Месяц назад

Is this supposed to be good? Looks like big pita

@alexandreptito8485 11 месяцев назад

how does it work with black objects?

@randymay 11 месяцев назад

Yeah it can.

@iangraham6730 9 дней назад

I bet I could model them faster in Blender than the time it took to scan and process them 🤔

@randymay 8 дней назад

Probably if you have the skills to do that. I don't know if the sizing will be 100% and the scanner is more of a tool to help with design work and not replace it.

@iangraham6730 7 дней назад

@@randymay Now I'm just wondering why you 'loved' your own comment? 🙂 Besides that though, the sizing is not an issue, at all . . you can get dimensionally accurate parts in Blender, no issue, and there is also Fusion 360. And also, I don't see any improvements on the scans compared to the ones I used to get, a good few years back, with the old PSVR camera hack! And that only cost around 20 bucks! It's a nice little gimmick for people that can afford it, don't get me wrong, but it's not worth the money they are asking for it, and thats by a long shot!

@randymay 7 дней назад

I like and heart all of my own comments. It just adds a little bit more interaction to the channel if nothing else. And yes prices are definitely a major factor when it comes to these and they're really not meant for everyone. Like I said they are more of a tool to help along with designing things or remaking things than anything else. Like how you can get geometries that would take you hours along with multiple tries to get right in just a few minutes using the scanner. And yes you can use a camera setup and do photogrammetry. I'm actually going to be doing a car build on this channel using a lot of the tools that I have gotten and shown in these videos. I'll be converting a early 90s car to full electric using the motor from a 2019 Nissan leaf along with its batteries. Being able to use this scanner to scan the entire engine bay to mock everything up is going to be extremely helpful for that along with making adapter plates so the electric motor will mate with the manual transmission.

@iangraham6730 7 дней назад

@@randymay Fair enough, it's got its place in that sense, modeling an engine bay is tricky! That upcoming project sound right up my street btw, I'll be definitely watching out for it 👍

@jochem1986 День назад

I used the Aesub scanning spray and I'm not going to buy another can. It's 3x as expensive as I'm willing to pay.

@bluepirate4640 2 месяца назад

is that a ganador?

@randymay 2 месяца назад

Kinda

@ZKTVtechedu24 9 месяцев назад

Exactly how many hours of scanning it takes for you to come up with a satisfactory cad model of this part !!?

@randymay 9 месяцев назад

It really didn't take that long to scan. Maybe an hour with all the processing times?

@ZKTVtechedu24 9 месяцев назад

@@randymay which means you're a Pro dude 😎

@jsando5.079 10 дней назад

Reflector from your Mazda MX3?!? What! That’s awesome! KLZE or BPT?

@randymay 8 дней назад

B6ME the sohc 1.6. I'm going to be swapping it out for a 2019 Nissan leaf electric motor. I will be making videos about it on this channel.

@bombtech172 Год назад

Lots of issues with this software running on my laptop. Worked with tech support for awhile, but nothing since. Very disappointing so far.

@randymay Год назад

What kind of problems have you been having? That software is not easy to learn in my experience but I think I got it all down pretty much and I think I am about 20 plus hours into using it. So I might be able to help.

@Bueno226 Год назад

This is the video summed up, you can't do it unless you have an relatively expensive 3d scanner, I'm not very good at this so i'm taking a course, use my code to get a discount. This video was just for a product review and get you viewers to pay for your shit lol.

@randymay Год назад

This was basically a review video about the mole scanner but at the same time I wanted to show what you can do with it and that you will need at learn a 3d software if you are going to do anything with any 3d scanner. Even with an expensive scanner you are going to need to learn how to work with the files in 3d and how to make your own parts. When I comes to the course I talked about in the video it was to show people that it was an option and something that I already bought for myself. So no one was paying for it if they used the code seeing that I already bought it. If anything I would get a credit to use later if I wanted to and they would also get the same amount off the course if they wanted to take it as well.