How to - Custom "Bass Knob" Mount - MAKE IT INTEGRATED!

Подписаться 799 тыс.

Просмотров 93 тыс.

50% 1

When we include a "bass knob" remote dash control in a car audio install we want it to be integrated and part of the control panel in the vehicle. We could just drill a simple mounting hole, but how can we make it look like the controller is meant to be? In this video I add a controller for the AudioControl ACR-3 in the CAFJetta build!
🔨 Make good sound GREAT with the AudioControl ACR-3 and D Series of DSP integrated amplifiers! Lear more from show sponsor AudioControl here:
✔️ bit.ly/CAF-Aud...
🔊 Want more? Check out these links:
✅Car Audio Tutorial Library: bit.ly/CAFlearn
✅ FREE weekly training program: bit.ly/CAFlist
✅ Box Designs, BUILD YOUR OWN BOX!: bit.ly/CAFdesigns
✅Join the CAF Patreon Member Team: bit.ly/CAFpatreon
🔊🔊🔊 FULL VIDEO SERIES PLAYLISTS:🔊🔊🔊
Ported Downfiring Subwoofer Build: bit.ly/CAFdown...
Dad's Sound Quality Daily Driver Build: bit.ly/CAFdadsSQ
SEMA F150 Subwoofer Box Build: bit.ly/CAFf150
LOUD Wrangler Build - bit.ly/CAFloud...
SQ Grand Cherokee Build - bit.ly/CAFgran...
Stealth Hidden Bass SQ Build - bit.ly/CAFstea...
Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community!
-SUBSCRIBE-
www.youtube.com...
--LET'S CONNECT!-
Website: www.caraudiofab...
Facebook: / caraudiofabrication
Instagram: @caraudiofab
Snapchat: @caraudiofab
Music:
Switch It Up - RU-vid Audio Library
Komorebi - RU-vid Audio Library
X-Ray Vision - RU-vid Audio Library
Licensed under Creative Commons: By Attribution 3.0
Use of information from this video is at your own risk. You MUST view the full disclaimer here: www.caraudiofab...
Car Audio Fabrication - Master Car Audio - Design, Build, Install

Опубликовано:

17 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 158

@louiabraham5994 4 года назад

That looks awesome, back when I did custom installs it was, MDF, fibreglass, body filler, that laser cutter and 3D printing would have saved me months and years of sanding 😂

@jerelgriffin4218 3 года назад

The small details make the difference. Yes I have made those subwoofer control panels. I usually make them out of polycarbonate and paint the back side or warp in a sticker vinyl

@JacobFrey 4 года назад

Dude, that's soooo good looking. I hope to have an ACR-3 in my car one day.

@leon_mnl 4 года назад

i always used to do it when building systems in my cars , these small details , always made friends jealous so i had to do it for them to,that’s how my custom car audio business started ....wish i still did that....

@benjaminoller8765 4 года назад

I did the ol empty switch panel with the pot shaft sticking through. It worked really well to hide it like I wanted and doesn't look too bad since I got a better looking metal knob to put on it

@jms7585 3 года назад

Because everyone has this “basic equipment” which can be purchased at any Walmart for everyone to have. Great video, nice work!

@lunchboxbailey 4 года назад

Done that for those and radar detector hardwire mute controls. Typically used the actual knockout plate itself and just drilled holes to support the leds. Hot glued the PCBs in on the radar detector mute module and the LEDs would shine through. Bass knobs are a bit easier since they bolt to the panel itself as long as it’s not too curved.

@ArmedNewYork 4 года назад

years ago when i was doing car audio for a living i used to take the kenwood and bazooka tube control knobs apart and custom mount them if the customer wanted them exposed. Used to build mounts for the boards out of sheets of plastic and epoxy them in place.

@RJSDZNS 4 года назад

Your attention to detail is sic👍👍 looks awesome Mark

@joboy77 4 года назад

This is great work. I love how you don't half ass your work.

@bablobhai 4 года назад

perfection.. the way you did it, it looks OEM!!

@benpearce3068 4 года назад

I literally am doing this tomorrow, awesome vid as always, thanks Mark 👍

@Thomamps 4 года назад

I love cars that have the pop out button locations. I've used them to mount control knobs and switches plus indication lights. Everything from simple drilled hole to shaping and paint. These are defined by time, expense and overall look.

@arturozarate1752 4 года назад

Mark, that shit IS LEGIT! I geek out on little details and custom one-off pieces too! Good job from the fab kitchen. Eat your heart out Doug!

@shanecabbage2187 3 года назад

I have not yet, but my next build will have a bass knob, and thanks to this video I may have the courage to custom mount it in a 'factory' location.

@cruznfl340 3 месяца назад

In this video I'll show you how to make a custom flush mount bass knob. In my case I'll use a laser and cad software... (the moment he lost me)😂😂 Awesome job as always. By far the best car audio channel on RU-vid. Very professional and super detailed which yields to a very clean install every single time.👍🏼👍🏼

@CarAudioFabrication 3 месяца назад

I believe I stated it in the video but many local makerspaces and even libraries have lasers and 3d printers. 3d design is a valuable skillset that is worth learning for many applications, thanks for the kind words.

@davidlynch5235 3 года назад

This might seem gawdy but has always done me well, I put the bass knob somewhere factory in the dash if it's not noticeable, if it sticks out I usually hide them either under dash or low on the center console twords the seat out of any area of movement. Sometimes ad an additional kill switch on the amps, while not good for the amps sometimes nessecary to avoid s ticket lol

@henrylong45 4 года назад

What a great idea. I have a AudioControl D-4.800 amp and a D-1.800 amp. I will be controlling the D-1.800 with an ACR-1. But, I've been looking for a professional way of mounting it into my 2011 Mercedes Benz CLS 550. Your video was VERY helpful. Thanks a lot!

@webberfan1234 4 года назад

I did the bass knob in my pioneer 5 channel on my 2004 Civic. When I got it installed, then just taped it into a cubby on the left side of the steering wheel. When I finally looked at it years later, I got to work. 1 screw, popping out a small panel, and drilling a hole, I mounted it all myself. Would have taken them 5 minutes, took me about 25 since I have no experience.

@nidaldajani728 4 года назад

Your videos are inspirational, and your builds are clean-cut and professional. Thanks for sharing your knowledge.

@malachi4169 4 года назад

I have disguised my bass knobs with the factory push in cigarette lighters. You'd never know it was there. Lol

@jstacoder 4 года назад

I’ve done the same, always looks clean.

@DGKRayner 4 года назад

Thats genius!

@davidtimmerman3121 4 года назад

i used to do the same. i'd use a generic knob with the lighter symbol on it. complete camo.

@iChubbs_81 4 года назад

Been wanting to disguise mine with the interior lights dimming switch 😬😬

@malachi4169 4 года назад

@@iChubbs_81 are you referring to the scroll wheel style or knob style?

@jpaez82 4 года назад

I am in the process of making something offical for my bass knob. For now i have recycled piece of plastic with heavy duty velcro.

@Bodelier 4 года назад

Damn Mark thanks for showing us your knob! Jokes aside though, it looks good as usual, but I think it would have looked better if it was matte like the rest of the pannel.

@CarlosHernandez-vh1sz 4 года назад

this is nothing but FIRE !!! i wish i had that back in the day lol as a few on here have said, YEARS of sanding and hope LOL peace from chicago ✌🏽

@jesush.gonzalezjr3323 4 года назад

Never used bass knobs.but now that you showed how you do one I'll try it next time.

@burrvisiontv 4 года назад

Yes ive made custom knob,switch,toggle dash brackets before... But, i dont own a lazer die it all by hand some with no ruler just eyeball and hope

@DjGrahnstettoOffical 4 года назад

I've done something similar with a LED bar switch in my golf. Tho, the button I used, just snapped into place, it was really satifying.

@marcellusfrank126 4 года назад

Jeez...I've been watching for years, and you still blow me away with these ideas. Looks like I missed quiet a few videos. I guess, I got a lot of catching up to do. LoL

@AlexanderGarcia-mp3lb 4 года назад

That look super great Mark

@dennisnarayan4914 4 года назад

I have actually done a simple attachment on the far right side of the console where I have mirror adjustment controls. It is where I have out a switch to the amplifier and just perpendicular to it (a little toward the left), I have mounted the bass control knob. Just to avoid any major modifications to the panels as I have a 2010 1 8l Toyota prius. Your OEM look modification looks rather slick though. Good job mate 👌

@MrGrumpy6489 10 месяцев назад

I like the integrated look, wish my car had a spot to do that in. I haven’t plugged my bass controller in yet since I don’t want it just sticking out. Still trying to determine a realistic spot.

@manuelpotent4428 4 года назад

I've been making custom bass controller mounts for years. Been loving my CO2 lazer for a year now and been doing custom touches in the vehicle to make my installs pop. Custom USB holders etc.

@henrytoledo4103 3 года назад

yeah , I'm sure it'll look GREAT. But I'm talking to the other 99% of the car audio enthusiasts that don't own a Laser cutting tool. Everyone else just take your time, plan ahead and go Slow. Your install will look great even without a Laser..Keep trying

@manuelpotent4428 3 года назад

@@henrytoledo4103 LOL,

@bedema2483 4 года назад

Wow....this is simply amazing! Laser cut a little mount!

@justin9162 3 года назад

your custom fabrication work is so satisfying to watch mate, awesome job love it

@iChubbs_81 4 года назад

Pretty slick! Tuned in from South Texas

@caddyshack6536 3 года назад

Hey Mark, yes back in the summer I flush mounted my arc1 or 3, Well whichever one works with the Matrix 6 linedriver Although its in a strange place on the right next to my headlight switch it looks cool ps my car is right hand drive so its pretty Conveniently placed Also I have to thank you for making your video about the cable flange you use for the powercable through the firewall this is the best idea really reassuring

@nicholasharootunian9624 4 года назад

Again, watching these videos so I can take over and help my dad’s business

@25hztolife86 4 года назад

Great but I don't have the machines you have......how about an old school approach. Maybe using ABS Plastic.

@superchile9640 3 года назад

On one vehicle the bass knob is in the ash tray. Lid folds down and I don’t smoke so that area isn’t used anyways. Another vehicle I used a pac bass knob and took it apart and put it in a small panel on the side of the console on the drivers’ side. My third vehicle it is in an unused spot in the headlight switch. All are nice and out of the way.

@kurtschalles8947 4 года назад

cig lights epicenter back in the late 80s and still to this day with bass knobs

@superchile9640 3 года назад

Great job. AudioControl is amazing. Great products as well as great support.

@CarAudioFabrication 3 года назад

I agree! 👍

@_BAD_MERC_ 4 года назад

In several installs I have converted the cigarette lighter to a bass control. It looks like nothing was modified and keeps curious fingers from cranking it to 11 when the car is in the hands of others.

@cafe80s 4 года назад

Looks good, but you lost me at freakin' "Laser"

@henrytoledo4103 3 года назад

WHAT? you you don't have a laser CAD based cutting table? This channel is not for the common folks that only have a die grinder and an idea!

@mau5lover2000 4 года назад

I just have mine mounted under the dash but I really love the factory look that this gives I might actually do something like this in my install I have a knob for the brightness of my dash lights and I might be able to squeeze in the bass knob somewhere next to it.

@austinbob7291 3 года назад

Hey I have been a subscriber for awhile and I have learned a lot you make great videos and a lot of great ideas

@K-Effect 4 года назад

Reminds me of the older Honda prelude with rear steer, they had a control knob like that in the center consul

@lunitikk 4 года назад

Looks good Mark! Keep up the good work brotha.

@ark2380 4 года назад

Good to see your after ages!!! Can you make a video on the under seat subwoofers available (flat rectangular ones)?

@bradczernik 4 года назад

I did something similar in my Tundra with a space that wasn’t used like that. The bass knob looks factory. Same with my tweeters I mounted in the sail panels. Also had to wire the factory USB port and factory mic and 6VDC mic amp to the new head unit because no pre-fab harnesses existed that I could find.

@kennyg4143 4 года назад

I've watched so many of your videos and I still think imma blow up the car lol.......Great content!!!

@Domaudeo 4 года назад

I usually try to reuse as much as the OEM plastic cover blanks as possible. For Bass Knob, I often move the LEDs by desoldering them and keep the knob on a single plastic blank, recessed when possible, then the LED goes on the next or are kept discarded because they are usually way to bright for night driving.

@zakbrinkhoff324 Год назад

I replace the LEDs with a dull red one because red does not affect your night vision

@MrDopey32 4 года назад

That looks great Mark! Keep up the great work!

@aggieGT 7 месяцев назад

Love the attention to detail you put into everything you do. I have a question when it comes to bass knobs though. Currently have an lc2i pro (bass roll off fix) and an epicenter in my b&o f150. Was wondering if there is a dual rotary potentiometer similar to the acr-4 that comes with the microcenter that can accept two inputs to control both the lc2i and the epicenter? Just looking to clean up my setup a bit going from two bass knobs to one dual rotary knob. Thank you for your time.

@Jefflove79 4 года назад

Ive got my acr1 stuck for now on the side of my center console between my seat because I don’t have a laser at home to make custom panels 😁 that plate looks dope tho! Great job as usual 😉

@johnsteger 4 года назад

If you give him the measurements he'll cut you one out for a reasonable price ...He did a tear drop for a A-Pillar build i did and its badass

@ausmartin1 3 года назад

I like this informative video so much that quality custom built mini switch panel is just so satisfying :-)

@lacboiatl 4 года назад

I did something similar like in my kia Rio. Had a jl hd 900/5 and the rlc needed a spot so I wanted it to look stock so I rigged it up next to the parking brake and viola

@king_fisher1873 4 года назад

Yes, bass control all done with dremel.Lasers were not even available at the time.Only did it once after that I couldn’t justify its use. At the time it was controlling 2 x 18” Petra Pro. Those are stage speakers that dominated Orion, alpine, mtx, punch, Sony, blaupunkt woofers only existed. They were in a 92’ Z28, (last year before body style change) with the doomed back window. I’m 47 now and was 16yrs old when I started using my craftsmanship to build custom boxes back then to utilize very little space or however much the owner allotted me. I kept getting kicked off Sonics property for shaking their awning. I could flip a cassette tape on my roof. I’m convinced Crutchfield stole my rear swing door boxes in Tahoe’s and Yukon’s. I didn’t have the income to patent anything, but I had those built over a year in a half before they started selling exactly molded boxes exactly the same. Some agree some don’t but I’m convinced.

@tylerwatt12 Год назад

Does the ACR-3 or any of the DSP/Amp's remember the volume? I'm using a SPDIF to RCA DAC that has no volume control, and I don't want to frantically turn the volume down every time I start my car.

@dizzle1555 4 года назад

Added mine directly under the radio with a pair of VU meters on each side.

@ryanmaya8685 3 года назад

Can you do a big three installation video?

@jjsgarage1966 4 года назад

Looks great! Mine is in the glove box, as I have a hidden system. I tried attaching a pic but no go...

@edwardpic1828 4 года назад

I've done the same thing basically on the custom vehicles I build. But, I do have a CNC Laser, CNC router and CNC plasma.....Can make almost anything, oh and I also have 48x48 vacuum forming machine.....Me likes my tools

@NitroNuggetTV 4 года назад

Then there is me with my bass knob held in place with some cardboard painted in matte black haha You'd never know if you saw or used it tbf ;)

@MrXispas 4 года назад

Hi Mark. Nice one!!! What cad software do you use? I use PowerShape but i work with surfaces, solids it´s better for our projects.

@davidatrian913 3 года назад

What brand and model do y’all recommend for 2 12s ? And 2 15s ? Also what amp for the 12s ? And what amp for the 15 ?( with no budget ) I’ll appreciate y’all opinion

@hXcSwaggy 3 года назад

Psi Car Audio Subs are fantastic they also make great amps their subs range from 600w 4500w RMS. It really depends on but you want them to do whether you're going for SPL or sound quality and how much room you have

@jaceyrondeau8133 3 года назад

Have to admit. Usually just hide that knob in a center console or glove box. Somewhere easily accessable but out of view. Sweet mod you did though. Love the high end tools you've acquired.

@iamsuperbleeder 4 года назад

Very clean! I mounted my bass knob in the drop down ash tray in my Blazer. I don't smoke so it was wasted space for me, not anymore! I can open the ash tray, make an adjustment, then close the ash tray and the knob is out of sight.

@hevendranarayansamy2793 4 года назад

Great work. Well done

@Arno_be 3 года назад

w/o cnc just use a oem unused button, tricky but working. Done on a vw caddy 2019

@CarAudioFabrication 3 года назад

Yep, can definitely be done that way

@tailsdragon4447 4 года назад

I done two custom based on Mounds for a kicker amplifier I've also done custom button mounts on aircraft control panels a lot more though it says similar process just that we use aluminum

@karlarsch9124 4 года назад

My last bass knob was located in the ashtray. So when I pulled out the ashtray the knob flipped out and a bit up

@dytch2220 3 года назад

I love your vids, definite sub. Tons of great ideas, information and techniques. This knob install looks nice and far be it for me to criticize, but what you might consider to level it up is match the shape/profile of the OEM inserts and machine a flat recess for the button to fit into, using more of a muted/matching finish. Probably just my preference but this could have achieved a more stealth/OEM look which is my jam.

@SAJSOUND 4 года назад

Wow, watching from Philippines

@thebkg 4 года назад

FYI, for the many who don't have access to 3D Printers and Laser CNC's, there are small companies popping up these days that have all of those tools. Just design what you need in Sketchup with exact measurements, hole sizes, and the measurements of hole placement on each piece, then take that to a 3D Printing company. This way you can make something just as custom as Mark here without needing to invest hundreds of dollars (or more) on the tools to achieve it. Granted, if you think you'll make custom pieces 3 or 4 times a year you probably should consider making the investment since you'll spend at least that much or more on having someone else print them. But if you're just needing things printed for one project then going 3rd party would likely be the way to go. Just a thought.

@neatt3815 4 года назад

Honestly, it wouldn't be to hard to make with basic tools at home. Could even make it out of thin MDF. I'd still love a laser cutter and 3D printer though 😁

@berto81 3 года назад

Which bass knob should I buy for the LC1-800 AMP?

@derekjarman1638 4 года назад

Nice job!

@RyanBassForLife 3 года назад

I love it GREAT VIDEO

@148Reaper 3 года назад

Quality work

@clayscott8363 4 года назад

You should do an in depth video of installing the lc2i

@EngineerDJ_Julius 2 года назад

that's ideally where I want the bass knob to be at

@mc__mauri8863 4 года назад

not custom bass knob, but managed to install 2din headunit in 1din slot, nissan micra K11!

@johncochrane2667 4 года назад

Love it man! That glowforge looks so fun! Do you think you may be able to spare some time and do some truck build ideas on the future? i.e. a behind the rear seat amp rack and 4x8in under seat ported sub box in a 2015 Super Crew F-150?? 🤣

@sharune007 4 года назад

Need to add an equalizer to my 2020 Honda crv factory radio. Any suggestions? I already replaced the speakers. The car comes with subwoofer.

@ClownBaked420 4 года назад

Any thoughts on system for a Cadillac deville 2001 sub's,amp,speakers,in dash open thoughts

@1madmaxx80 4 года назад

@CarAudioFabrication How about a vid on how to actually make bass knobs? I've got an Audison amp that needs a knob. Cheers!

@ixionn563 3 года назад

Most people use the PAC LC-1, it controls the level of the RCA signal being sent to the amp. That's what I use for my Pioneer amp as it only had the awful 50Hz bass boost knob.

@mrbutterman2443 Год назад

My first sub system I made a custom knob in my 10th gen civic

@djx-factor992 3 года назад

Love your channel Mark. So glad thad I decided to subscribe... Great content and inspirational ideas as always. Question: How can I contact you about making a custom acrylic panel to house 3 Audio Control knobs?

@shawnkarvonen 4 года назад

I usually like to drill a hole in the factory plastic and mount from behind I don't like mounting a bulky base knob somewhere so that you could see it..

@josephblaylock4051 4 года назад

Mark, can you tell me the info for your CNC laser machine. Yours looks to be much more affordable than Steve Meads laguna laser. Like maybe $150,000 more affordable, LOL!

@narutoestupapa 4 года назад

Where can I find a professional installation? Like yours my friend

@niekgozer26 3 года назад

Tbh wouldn’t have used that shiny material. But idk if you can get mat black

@panniechristou9644 4 года назад

nice job !

@suave218 4 года назад

I love the idea !!

@dmod686 3 года назад

I just but one of these but don't know which end is input, how can I know without damaging sub?

@bigk3355 3 года назад

Trying to do that now

@doobedi Год назад

You didnt show how you set up the ACR-3??

@marketalino1 4 года назад

Thank you

@poloshorty80 4 года назад

I have a 03 Lincoln town car & I need a good place to put my tweeters I have two pair

@leonart7875 3 года назад

Hey dude wat is the bes converter from 120 volts to 12 volts , with good amps and watts to use a car audio system at home

@ixionn563 3 года назад

There really isn't a great option at the moment, not one that's cheap. Keep in mind the most wattage you can pull from a North American wall outlet is around 1600 watts, that would be the total limit of your system not even considering amp efficiency. The best option I can think of right now is a PC power supply, the largest you can buy being 1600 watts. The thing is a PC power supply that can actually provide that much power will cost a lot, and it would have to be modified to put it's full wattage out. You're probably better off investing in home or pro audio amplifiers to run your car audio gear, or running a very small car audio system on a cheap PC power supply.

@carlosalejandromercadodiaz1341 4 года назад

Dude, love your this chanel

@chantzio7469 3 года назад

I have a question it’s none related to this video but i own a 2017 infiniti q60 and recently upgraded the none bose factory sound system to some focal sound system but I honestly yes theres a big change in quality but I feel like i need more speakers since i just have 6 speakers and it just feel like the tweakers are working hard and can definitely feel where the sound is coming from which is something i dont like anyway my question is does more speakers equal more like a surround sound feel where you don’t feel that the the sound is coming from that speaker if that makes sense

@ixionn563 3 года назад

Well music is still a stereo (2 channel) sound, so it wouldn't be real surround sound. I think what you're trying to talk about here is sound stage, which is where you perceive the sound to be coming from. If your sound system was installed properly, you can use the fader control on your stereo to make your front or rear speakers louder. Doing this will effectively move your sound stage and may achieve the effect you are looking for.