Тёмный
No video :(

How To Cut A Hollow Core Door 

Get It Done Home Repair
Подписаться 45 тыс.
Просмотров 129 тыс.
50% 1

Learn how to cut a hollow core door to any custom size.
Here are some of the tools that get it done home repair uses
www.amazon.com...
Skil Saw. amzn.to/3bPNCxJ
Irwin Clamps. amzn.to/2ZOvr5D
Wood Glue. amzn.to/2ZK2pnF
Stanley Hand Planer . amzn.to/2NzBR6h
Zircon Stud Finder amzn.to/3cQlPiG
Dewalt Drill amzn.to/2Nbuly1
Dewalt Drill Bit amzn.to/36WI2rI
Craftsman Hammer amzn.to/2Z1clZO
Craftsman Screwdriver amzn.to/3rCmHLX
Craftsman Level amzn.to/3tHeSGE
Craftsman Tape Measure amzn.to/3aQ2Fa4
Due to factors beyond the control of get it done home repair, it cannot guarantee against unauthorized modifications of this information, get it done home repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. get it done home repair recommends safe practices when working with power tools, tools, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of get it done home repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not get it done home repair.

Опубликовано:

 

28 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 176   
@danieldosanjos8126
@danieldosanjos8126 Месяц назад
You just saved me 1000 plus dollars
@adamburgess3949
@adamburgess3949 2 года назад
Thank you for posting such a clear, informative video! Exactly what we needed to see and follow for our DIY project.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
You are so welcome!
@devdemedia
@devdemedia 2 года назад
Man such clear cut instructions with no distractions. Subscribed!!!
@aliabdulwahed1185
@aliabdulwahed1185 2 года назад
You are the best 💪
@user-fh3jp7hm7v
@user-fh3jp7hm7v 9 месяцев назад
I just ran into this problem and I ended up doing exactly what you did - but then I started doubting that it was a good/legit way of doing it but now I feel like I’ve done a solid job!
@pauloroarty1799
@pauloroarty1799 2 года назад
Excellent I need to do this to 5 doors and was at a loss as to how to perform the task.Great Video Thank you.
@biggles258
@biggles258 2 года назад
Fascinating. I'd identified the problem but great to see a professional demonstrate how to achieve a great result.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad you enjoyed it!
@simonainsworth5905
@simonainsworth5905 2 года назад
Hi Pal, I'm a handyman from the UK and this video was BRILL!!!!!!!, saved me money by NOT getting in a joiner. Thanks ever so much. Simon
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Hi Simon I'm happy to help. Thanks for watching.
@samanthak.mcdaniel7955
@samanthak.mcdaniel7955 4 месяца назад
Thanks so much - was terrified. Very good information and instruction.
@getitdonehomerepair
@getitdonehomerepair 4 месяца назад
Glad it was helpful!
@dabro2080
@dabro2080 2 года назад
Amazing I've been too scared to cut down 1 door for a year and now I'm gonna do it after watching this as I needed to cut the door a lot
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks for watching. I'm happy to help.
@Gnik4144
@Gnik4144 4 месяца назад
Thank, you gave me the confidence to cut my brand new door to size. I did it with a hand saw but it came out good enough lol
@TomKinsella
@TomKinsella Месяц назад
Great video, thank you!
@gtrgenie
@gtrgenie 2 года назад
Great video! The extra mile with the planer👏🏽
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad it was helpful!
@walkerjw81
@walkerjw81 2 года назад
Great video. Soothing voice, which makes me think I'm ready to build a house from scratch now. Thanks!
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Awesome! Thank you!
@adcashmo
@adcashmo 8 месяцев назад
Thanks for the tips! Just what I need to know in order to cut down my ikea wardrobe doors with their cardboard core :)
@getitdonehomerepair
@getitdonehomerepair 8 месяцев назад
Happy to help!
@salembeeman370
@salembeeman370 Год назад
What a professional! At first I thought you should brad nail through the side then I thought "Hey the manufacturer did not do that why over engineer something." Thanks.
@REYES36o
@REYES36o Год назад
Going to do this on a door I need. Thanks for the straight forward video
@5t66t5
@5t66t5 8 месяцев назад
Excellent video. Informative, straight to the point. Thanks for posting
@ajwilson6793
@ajwilson6793 2 года назад
Thank you Sir 👍🏼 Very helpful as I’m about to embark on the job. Appreciate your craftsmanship 👏
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Great. I'm happy to help. Don't forget to subscribe.
@stephenzies8867
@stephenzies8867 3 года назад
Great Job As Always Jim. You Are A Wealth Of Information.
@getitdonehomerepair
@getitdonehomerepair 3 года назад
I appreciate that!
@ruthenerson9594
@ruthenerson9594 8 месяцев назад
Excellent video! This is something I can do. Thank you for keeping it simple !
@getitdonehomerepair
@getitdonehomerepair 8 месяцев назад
Glad it was helpful!
@rafaelesposti8009
@rafaelesposti8009 Год назад
Excellent! I need to do this to 2 doors and was at a loss as to how to perform the task. Great Video, thank you.
@getitdonehomerepair
@getitdonehomerepair Год назад
Glad it was helpful!
@bowang8747
@bowang8747 Год назад
Great video for the home DIY guy!
@getitdonehomerepair
@getitdonehomerepair Год назад
Thanks! 👍
@prjawahar5879
@prjawahar5879 Месяц назад
Lovely video, a great help ❤
@getitdonehomerepair
@getitdonehomerepair Месяц назад
So glad!
@patriciozazzini968
@patriciozazzini968 2 года назад
very professional and step by step. Great Teacher
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thank you! 😃
@mr2xfour
@mr2xfour 2 года назад
Exactly what I was worried about for my task at hand today, 4 new doors to work on. You took the worry away, Thank You so much for your video!!
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad I could help!
@2006jakebob
@2006jakebob 7 месяцев назад
Very helpful and you made it easy! Thank you sir!
@getitdonehomerepair
@getitdonehomerepair 7 месяцев назад
Glad it helped!
@macgarth
@macgarth Год назад
Got me out of a bad spot! Appreciate it!
@Jack-zc1qp
@Jack-zc1qp 8 месяцев назад
Thank you this is just what I needed.
@BartSimpson-l1c
@BartSimpson-l1c 14 дней назад
Excellent
@getitdonehomerepair
@getitdonehomerepair 14 дней назад
Thank you! Cheers!
@celinehould1114
@celinehould1114 2 года назад
Thank you so much. Well done. Explanation were easy to understand. Thank you teacher.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad it was helpful!
@florettefrancis7518
@florettefrancis7518 2 года назад
Exactly what I was looking for. Thank you
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad I could help!
@adnacraigo6590
@adnacraigo6590 2 года назад
Fine work. Good explanation of what you were doing. Thanks.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad you enjoyed it
@kimberlyland
@kimberlyland Год назад
Very informative. I understand now how to do it thank you
@getitdonehomerepair
@getitdonehomerepair Год назад
Glad it was helpful!
@ilokanopride4752
@ilokanopride4752 2 года назад
Thank you jim the car guy,your so helpful to us
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Happy to help
@littleblueboy9780
@littleblueboy9780 Год назад
Exactly what I needed. Instantly subscribe
@maddydog
@maddydog 2 года назад
Great video! Thanks to you I did two doors by myself!!
@getitdonehomerepair
@getitdonehomerepair 2 года назад
That is awesome!
@joshuaandree9007
@joshuaandree9007 Год назад
My mother wants me to make a dog door in a door exactly like this. I just don’t want to f*** it up. I appreciate the video. Using the tape is a clever trick!
@deanodebo
@deanodebo 6 месяцев назад
Excellent! Great info, thanks so much
@getitdonehomerepair
@getitdonehomerepair 6 месяцев назад
Glad you enjoyed it!
@paulmcintosh249
@paulmcintosh249 Год назад
Great video! Really well explained steps.
@getitdonehomerepair
@getitdonehomerepair Год назад
Glad it was helpful!
@adriangoncalvez5377
@adriangoncalvez5377 2 года назад
Great job and thanks for teach me how do the job.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad to help
@jessefoulk
@jessefoulk 3 месяца назад
There's a market for custom fit hollow doors. Now if only they can make these user friendly for adjusting
@mansionspawn639
@mansionspawn639 Год назад
Amazing video sir. Literally saved me £100 s.
@getitdonehomerepair
@getitdonehomerepair Год назад
Great to hear!
@Najeeb706
@Najeeb706 Год назад
Thank you.
@LGB120
@LGB120 2 года назад
Im in carpentry school and I love it
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks for watching.
@gilhernandez13v
@gilhernandez13v 11 месяцев назад
Thanks for the video very helpful
@pgabrielfreak
@pgabrielfreak Год назад
Thank you SO MUCH! What a huge help!
@s.e.a4238
@s.e.a4238 2 года назад
Excellent work
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks for the visit
@FrizzellCorey
@FrizzellCorey 2 года назад
Great job explaining 👏
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad it was helpful!
@alfabrizio6005
@alfabrizio6005 2 года назад
That's great. I'll be doing a pergo flooring install in one of our rooms, and have to cut two doors. Not sure if I'll run into wood, or hollow, but this is great to know. Thanks.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad it was helpful!
@kareno6945
@kareno6945 2 года назад
That was truly awesome, your a great teacher dude, very clear!
@getitdonehomerepair
@getitdonehomerepair 2 года назад
I appreciate that!
@HP-eh9md
@HP-eh9md Год назад
Great video, thank you.
@getitdonehomerepair
@getitdonehomerepair Год назад
Glad you liked it!
@menikmati90
@menikmati90 Год назад
Thank you!
@getitdonehomerepair
@getitdonehomerepair Год назад
You're welcome!
@rdubezmoney
@rdubezmoney 3 месяца назад
Straight edge
@yzerman123
@yzerman123 Год назад
Super helpful, thanks!
@getitdonehomerepair
@getitdonehomerepair Год назад
Glad to hear it!
@meagan-kane2785
@meagan-kane2785 6 месяцев назад
THANKS!!
@getitdonehomerepair
@getitdonehomerepair 6 месяцев назад
You're welcome!
@BillLovesFilm
@BillLovesFilm 2 месяца назад
My father-in-law lost three fingers reaching across the path of the circular saw blade like you did at 5:35. I don’t recommend it. Sorry to darken your day.
@jaywilk7249
@jaywilk7249 Год назад
great great video
@getitdonehomerepair
@getitdonehomerepair Год назад
Thanks for the visit
@thefullmetalgamr9887
@thefullmetalgamr9887 3 года назад
Very Helpful Thanks!
@getitdonehomerepair
@getitdonehomerepair 3 года назад
Glad it helped!
@Watchnet24
@Watchnet24 2 года назад
Excellent video and super clean job:))Good luck to your channel 🙏
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thank you so much 👍
@dscritter614
@dscritter614 2 года назад
Very thorough. Thank u.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Glad you enjoyed it!
@sangcheollim8727
@sangcheollim8727 3 года назад
Thank you and I want to know how to cut the side
@getitdonehomerepair
@getitdonehomerepair 2 года назад
It is the same procedure but on the side.
@dankers12
@dankers12 2 года назад
Well don, thank you.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks for watching. Don't forget to sub.
@royrunnings4141
@royrunnings4141 Месяц назад
Great video, have a home made door at the moose lodge I have to replace. Just fell apart, you have really helped with the replacement door. By the way, how many miles has that tape measure got on it?
@getitdonehomerepair
@getitdonehomerepair Месяц назад
Glad it helped. Yes it has been around for a long time .Lol
@Chinkyxxxg357
@Chinkyxxxg357 11 месяцев назад
Thank you for your knowledge
@MachadoK75
@MachadoK75 2 года назад
Perfeito Você com este vídeo, ajudou bastante no trabalho que estou a planear para a minha casa. Obrigado
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks
@burdurky4301
@burdurky4301 2 месяца назад
I assume you trimmed the top?? If i am fitting good second hand doors that are slightly to wide, do i need to trim the hinge side or the handle side.
@mikeraphone6745
@mikeraphone6745 2 года назад
I cut a decent piece of new timber to fill the hole as lots of hollow doors use crap knotted timber as it's cheaper for them .
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks for watching. I'm happy to help.
@NorthElevation
@NorthElevation 2 года назад
You’re awesome!
@tracyskille8241
@tracyskille8241 3 года назад
Could you taken some off the bottom and top to keep from doing all that extra work
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Yes you can.
@lynngevity3724
@lynngevity3724 Год назад
If just a little is taken off top and bottom, are there any special finishing touches needed?
@samanthak.mcdaniel7955
@samanthak.mcdaniel7955 4 месяца назад
What kind of blade, please?
@macez4586
@macez4586 10 месяцев назад
I just subscribed! I’m just wondering since it was going to be cut across, why was there a need to use the stud finder? Do I need to purchase this machine in order to cut the top, middle or bottom section? Thanks.
@getitdonehomerepair
@getitdonehomerepair 10 месяцев назад
No need to buy the stud finder. If you cut off the bottom you will just need to install the bottom piece of wood.
@TheWilferch
@TheWilferch 2 года назад
1.) Do you "score" the backside too?....seems you only put a pre-cut score line on the top side. 2.) Typically....how far "up" can you cut on this style door and still retain the bottom edge?
@robertm1692
@robertm1692 2 года назад
The "solid" part of that door looked to be about an inch thick.
@m.traviswhite8764
@m.traviswhite8764 2 года назад
I have the same question about scoring both sides of the door!
@coreywalters
@coreywalters Год назад
I scored only the top side, turned out to be a great, clean cut.
@chrisburns5691
@chrisburns5691 Год назад
circ saw cuts with "good side" down, will tear out through the side facing up, so not necessary to score the bottom.
@CM-1723
@CM-1723 Год назад
I've just had carpets fitted now I need to cut down the doors but they've already been cut down past the bottom piece of wood so it's already at the hollow part , how will I cut it down ?
@getitdonehomerepair
@getitdonehomerepair Год назад
You can use a circular saw or a jig saw but you will still need to install a piece of wood on the bottom after you cut to size.
@dougregula8497
@dougregula8497 2 месяца назад
Why didn’t you just trim a little from the top and bottom and not go through all that work- both sides have solid wood and would have made this project way faster
@dakotaborn6774
@dakotaborn6774 Месяц назад
All that work? What do you think you have to do if you take from top?? You’re moving hinges 😂😂😂😂
@TheHarmonicOscillator
@TheHarmonicOscillator 8 месяцев назад
Would it hurt anything if you just left the bottom open?
@getitdonehomerepair
@getitdonehomerepair 8 месяцев назад
Yes you need to put it back in the bottom or the door will just crush.
@shaunmcilduff582
@shaunmcilduff582 Год назад
So i assume it is the same process if making the door narrower?
@getitdonehomerepair
@getitdonehomerepair Год назад
Yes it is the same. Thanks for watching.
@henry1343
@henry1343 2 года назад
Great video. You said I could use a jigsaw? Do you have a link to that video?
@getitdonehomerepair
@getitdonehomerepair 2 года назад
I just added a link to my video for anyone in the future but here is the link for you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R9HnzvfrMd0.html
@denisegagne6706
@denisegagne6706 2 года назад
Would be nice if you said what kind of blade you were using on your saw
@chrisburns5691
@chrisburns5691 Год назад
finishing blade would be best.
@ussubmarineveteranscharita4501
@ussubmarineveteranscharita4501 2 года назад
I may be overthinking this. When you score the door before cutting it, you use a knife blade, which is very thin. However, the kerf from a skill saw is much wider than that score from the knife. This seems as though the knife scoring is unnecessary or should I be cutting with the power saw with the kerf lined up directly over the knife score or adjacent to it?
@getitdonehomerepair
@getitdonehomerepair 2 года назад
By using the knife it will minimize the splintering of the cut area. Thanks for watching.
@johnb2005
@johnb2005 2 года назад
Score with knife then just keep the top of your circular saw blade on the score line .
@sjweigel9671
@sjweigel9671 2 года назад
what type of blade is in the skilsaw? I am surprised it just cut through the tape and did not gum the blade.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Actually it was a gross cut blade. Thanks for watching. Don't forget to sub.
@bnenjam
@bnenjam 2 года назад
Great video but I do not understand why the door was scored.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
To minimize the splintering of the wood.Thanks for watching
@chrispark11
@chrispark11 2 года назад
That is a serious accent my man!
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks for watching
@vero0992
@vero0992 3 года назад
Hey Jim, is a 24T framing blade OK for this job as long as I protect the trim with blue tape? I'll be using a 7 1/4" Dewalt
@vero0992
@vero0992 3 года назад
24T blade worked great. Thanks as always for sharing your knowledge!
@getitdonehomerepair
@getitdonehomerepair 3 года назад
Yes that will work. Thanks for watching.
@siniestro0239
@siniestro0239 2 года назад
Can someone tell me what type of Circular Blade do I use for this cut? thank you
@getitdonehomerepair
@getitdonehomerepair 2 года назад
I always use a fine tooth blade for this kind of cut . It causes less chipping of the cut.
@MrDoomzy
@MrDoomzy Год назад
What about the sides?
@getitdonehomerepair
@getitdonehomerepair Год назад
What is your question?
@lindaarbuckle6266
@lindaarbuckle6266 2 года назад
A discussion of saw blade depth would be helpful.
@getitdonehomerepair
@getitdonehomerepair 2 года назад
Thanks for watching
@lavelbrown9352
@lavelbrown9352 3 года назад
Could you just cut a piece of wood that it's if you can't get the wood out clean
@getitdonehomerepair
@getitdonehomerepair 3 года назад
Yes you can also do that.
@jennifert3528
@jennifert3528 3 года назад
Great job! Can you come to my house, every person that comes to help or claim they can help, in my townhouse seems incompetent once the job starts.
@getitdonehomerepair
@getitdonehomerepair 3 года назад
Your right .It seams like no one does what they say they can do. That is why I like to do almost everything myself . I keep very busy doing work for family and friends. All for free. If I can ever give you any advice just ask.
@jennifert3528
@jennifert3528 3 года назад
@@getitdonehomerepair I appreciate that. It really shows you are a caring person, even shows in your quality of work.
@DroppinNuts
@DroppinNuts Год назад
Hallow cuw duw.
@getitdonehomerepair
@getitdonehomerepair Год назад
Thanks for watching.
@eagillum
@eagillum Год назад
7:00- taking the bottom bums apart. Mine aren't coming apart.
@getitdonehomerepair
@getitdonehomerepair Год назад
Glad it helped!
@lordofshadowz--1316
@lordofshadowz--1316 3 года назад
Can you do that for the side of the door as well? Even with a guide I took too much off
@getitdonehomerepair
@getitdonehomerepair 3 года назад
Yes you can
@lordofshadowz--1316
@lordofshadowz--1316 3 года назад
@@getitdonehomerepair ty
@lorencoen3484
@lorencoen3484 2 года назад
Why all the tape?
@getitdonehomerepair
@getitdonehomerepair 2 года назад
The tape keep the door from splintering when being cut. Good question.
@hatchimatchi69
@hatchimatchi69 Год назад
Helpful thank you!
@getitdonehomerepair
@getitdonehomerepair Год назад
Glad it was helpful!
@jrose2dzl
@jrose2dzl Год назад
Only thing I suggest on this video everything looks good but instead of wasting 5 to 10 minutes shaving off the little pieces of cardboard on that bottom strip you can simply just cut one Edge on an angle with a razor blade super simple and then tap it in all at the same time and you will not need glue you will not need to sand it and it's finished
@getitdonehomerepair
@getitdonehomerepair Год назад
Thanks for watching and your input.
@nicholaskelly7407
@nicholaskelly7407 3 года назад
Great video! Thank you!
@getitdonehomerepair
@getitdonehomerepair 3 года назад
Glad you liked it!
Далее
How to cut down an internal hollow door
5:35
Просмотров 54 тыс.
C’est qui le plus fort 😂
00:18
Просмотров 11 млн
Whoa
01:00
Просмотров 45 млн
How to Cut Down Steel Pre-Hung Door + Installation
52:21
Interior Doors | What’s Really Inside
7:09
Просмотров 202 тыс.
How to TRIM A DOOR for a new carpet
22:24
Просмотров 124 тыс.
How To Cut Down Doors (Shorten Door Height)
3:58
Просмотров 381 тыс.
How to Trim and Rehang a Door
22:54
Просмотров 448 тыс.
CLEVER things to do with an Oscillating Multi-Tool!
10:28
Cutting a Door, How to Cut Down a Door
5:47
Просмотров 7 тыс.
How to Use Every Dremel Bit
20:02
Просмотров 567 тыс.
C’est qui le plus fort 😂
00:18
Просмотров 11 млн