Тёмный
No video :(

How to Cut and Fit Hollow Bifold Closet Doors | Easy Install 

John C RV
Подписаться 13 тыс.
Просмотров 118 тыс.
50% 1

Perfect from any room, closets, pantry, laundry or as a room divider.
Lightweight hollow core white PVC vinyl with a raised panel on the front only.
Easy to clean with mild soap and water.
Includes top track, door knob, hardware and installation instructions.
2 doors can be installed as a double door application, doors sold separately.
🛠️🧰👨‍🔧🔩⚡ TOOLS, PARTS & MATERIAL USED IN THIS PROJECT: 👨‍🏭⚙️🔧🧰🔨🔦⚡
Bifold doors example: amzn.to/36QOnp1
Prime-Line N 7534 Bi-Fold Door Hardware Repair Kit - Includes Top and Bottom Brackets, and Bottom Pivots and Guide Wheel: amzn.to/4byTMyL
Full Face Grinding Shield, Clear: amzn.to/30XkH62
Caulking Gun: amzn.to/3Xoa7QL
Liquid Nails: amzn.to/3J1aNac
Construction Adhesive: amzn.to/2Ig2GcL
Closet Door Pivot Adjustment Wrench, 5/16: amzn.to/3PdY57U
Tape Measure: amzn.to/3cW9szA
Carpenter's Pencil: amzn.to/3lcZ1dE
Impact Driver: amzn.to/3cVB9bG
DEWALT Screwdriver Bit Set: amzn.to/3l4TsxS
DEWALT Screwdriver Bit Set: amzn.to/36uykwY
Circular Saw: amzn.to/2GpxBm6
Angle Grinder: amzn.to/3cYukX4
Cutting Wheel: amzn.to/3lb4u4K
Screwdriver Set: amzn.to/3cUNDAf
“As an Amazon Associate I earn from qualifying purchases at no extra cost to you.”
See HOME IMPROVEMENT Projects Playlist for more;
• DELL OPTIPLEX 745 Mini...

Опубликовано:

 

29 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 176   
@JohnCRV
@JohnCRV 3 года назад
Perfect from any room, closets, pantry, laundry or as a room divider. Lightweight hollow core white PVC viny with a raised panel on the front only. Easy to clean with mild soap and water. Includes top track, door knob, hardware and installation instructions. 2 doors can be installed as a double door application, doors sold separately.
@katioetken5222
@katioetken5222 5 месяцев назад
LOVE all the camera angels to see EXACTLY what should be happening everywhere. NICE job. VERY useful. Thank you
@JohnCRV
@JohnCRV 5 месяцев назад
Thanks for the feedback. Glad it helped.
@texxmw
@texxmw 2 года назад
All diy-vids should be this good. Thanks.
@JohnCRV
@JohnCRV 2 года назад
Glad you think so! Thanks
@jameslund221
@jameslund221 8 месяцев назад
Good job most home owners will not go to the lengths you did. In fact the bifold door company would say you just voiced your warranty by cutting down that door. Great job 😊
@JohnCRV
@JohnCRV 8 месяцев назад
Thanks for that! Voiding warranty is not important to us. 👍Happy Holidays!
@kennethmason5787
@kennethmason5787 3 года назад
This is exactly what I needed. My doors are to high for my closet and I have to saw it just like you did. Thank you!
@JohnCRV
@JohnCRV 3 года назад
You’re welcome! Glad it was helpful.
@williamrudolph3481
@williamrudolph3481 2 года назад
Great Job!
@photocontrol
@photocontrol 3 года назад
Awesome tutorial John! Great job shortening the door and refitting the filler piece back into the hollow core! 👍
@JohnCRV
@JohnCRV 3 года назад
Thanks! 👍
@TheLaughingLion
@TheLaughingLion 3 года назад
Yep fitting and having the doors operate smoothly is the great challenge.
@JohnCRV
@JohnCRV 3 года назад
Yes it is. But before Home Depot was around you bought what was available and fit it. Cov-19 has brought us back to that😂
@LeeCheungsChannel
@LeeCheungsChannel 3 года назад
My goodness John What can't you do Amazing installation 😊
@JohnCRV
@JohnCRV 3 года назад
I cant do many things I would have wanted to learn. There's just not enough time but I try to learn as much as possible and pass it on to who ever wants to learn it, especially my kids. There's also many things we are learning together.
@MommiesNotRight
@MommiesNotRight 3 года назад
Great video, I would nail the bottom filler piece from the backside of the door so you don’t see the nail heads.
@JohnCRV
@JohnCRV 3 года назад
Good idea! but the nail are very small and countersunk after painting the door they are very well hidden.
@MichaelKudlatheInterested
@MichaelKudlatheInterested 2 года назад
I did this and it worked well. Make sure the tape is well stuck to the door.
@JohnCRV
@JohnCRV 2 года назад
Glad it helped!
@josepina3960
@josepina3960 3 года назад
Best video to install a bifold doors. Thank you so much for this video.
@JohnCRV
@JohnCRV 3 года назад
You are welcome! Glad it was helpful!
@garyaram1808
@garyaram1808 Год назад
Eazy peazy, great simple to the point. Thanks
@JohnCRV
@JohnCRV Год назад
Glad it helped👍
@prbutterfly124
@prbutterfly124 10 дней назад
This was great!
@JohnCRV
@JohnCRV 10 дней назад
Glad it Helped! Thanks for the feedback.
@tomvitale1
@tomvitale1 3 года назад
Nice job - thank you for outlining all the steps.
@JohnCRV
@JohnCRV 3 года назад
Glad it was helpful Tom!
@thebackwoodsmechanic5029
@thebackwoodsmechanic5029 2 года назад
Spectacular demonstration fellow tradesman
@JohnCRV
@JohnCRV 2 года назад
Back at you man and thanks for the feedback.
@bobtevault4012
@bobtevault4012 2 года назад
Great verbal instructions in sync with video.👍👍
@JohnCRV
@JohnCRV 2 года назад
Thank you! Glad it was helpful.
@Reviewing_Playing_and_More_RPM
@Reviewing_Playing_and_More_RPM 3 года назад
You are a skilled craftsman John, great tutorial and Tips...extremely well done...
@JohnCRV
@JohnCRV 3 года назад
Thank you kindly Dennis. I appreciate the comment.
@davestredulinsky
@davestredulinsky 3 года назад
An excellent video about how to cut and fit hollow core bifold closet doors. I enjoyed viewing until the 7:55 end and gave you a well deserved thumbs up. Thank you for sharing my friend.
@JohnCRV
@JohnCRV 3 года назад
Glad it was helpful!
@billyb5057
@billyb5057 3 года назад
can see how having to cut the door shorter makes the job much more awkward *👍thumbs up like👍Au😀👍always a full view 😀*
@JohnCRV
@JohnCRV 3 года назад
Awkward it was but I'm glad I watched and learned when I was a kid.
@MargarRuns
@MargarRuns Год назад
Thank you so much! This is exactly what I needed.
@JohnCRV
@JohnCRV Год назад
You're so welcome, Glad it was helpful!
2 года назад
You are very capable. The information on installing cabinet doors is very helpful.
@JohnCRV
@JohnCRV 2 года назад
Thank you for you encouragement and great support. Have a good week.
@moodyblooms
@moodyblooms 3 года назад
You are so handy John!! I have a bifold door on its last leg so I am going to have to share this with the hubby!! Thanks for your tips. Excellent job.
@JohnCRV
@JohnCRV 3 года назад
You can do it! Thank you for the nice comment.
@frederickwhite6416
@frederickwhite6416 2 года назад
Exactly what I was looking for, thanks.
@JohnCRV
@JohnCRV 2 года назад
Glad to hear it!
@laurelblair1912
@laurelblair1912 3 года назад
Exactly what I needed to see, it helped a lot! Thankyou!
@JohnCRV
@JohnCRV 3 года назад
Glad it helped!
@bradyyoder2611
@bradyyoder2611 8 месяцев назад
Thank you! This is super helpful
@JohnCRV
@JohnCRV 8 месяцев назад
You're so welcome! Glad it helped.
@MyTravelChannel-RO
@MyTravelChannel-RO 3 года назад
Beautiful video and very informative. Everything was so well explained. I really appreciate your attention to detail.👌👍
@JohnCRV
@JohnCRV 3 года назад
Thanks a lot for the comment Sorin. It means a lot coming from you.😊
@musclecarappraisal
@musclecarappraisal 3 года назад
I like these videos...I am starting to do projects around my home.
@JohnCRV
@JohnCRV 3 года назад
You can do it!
@biondatiziana
@biondatiziana Год назад
Nicely done! Thanks!
@JohnCRV
@JohnCRV Год назад
Thank you for the feedback, glad it helped.
@chrisburns5691
@chrisburns5691 3 года назад
nice work, signs of a pro- uses sawhorses opposed to working on the ground, tapes the door before cutting, etc.
@JohnCRV
@JohnCRV 3 года назад
Thank you for nice compliment we appreciate it.
@ActNaturally
@ActNaturally 3 года назад
Nicely done, good work and an easy way to show it. thanks!
@JohnCRV
@JohnCRV 3 года назад
You are welcome!
@Pianolisapark315
@Pianolisapark315 3 года назад
Nice fix doors! Great work! Big like!
@JohnCRV
@JohnCRV 3 года назад
Big thanks
@IamLeotheUnique
@IamLeotheUnique 3 года назад
Thank you dear John for this great tutorial👍👍👍
@JohnCRV
@JohnCRV 3 года назад
You are very welcome. Thank you for the visit and comment.
@IamLeotheUnique
@IamLeotheUnique 3 года назад
@@JohnCRV 👍👍👍
@straighttalk4988
@straighttalk4988 9 месяцев назад
THANK YOU SIR ❤️
@JohnCRV
@JohnCRV 9 месяцев назад
Most welcome
@joadhenry
@joadhenry 2 года назад
nice. thanks. exactly what I needed and delivered in a clear to the point manner. Subscribed.
@JohnCRV
@JohnCRV 2 года назад
Thanks for the sub! Glad it helped!
@donanderson47
@donanderson47 2 года назад
great video and explanation, thank you.
@JohnCRV
@JohnCRV 2 года назад
Glad it was helpful!
@glennnormoreNL
@glennnormoreNL 3 года назад
Very clear video. Well done. I would brad nail the bottom from the inside, if you are not painting it.
@JohnCRV
@JohnCRV 3 года назад
thanks for the comment. Definitely want to paint these doors. the factory finish is very rough. Have a great weekend.
@gordonlindsay7139
@gordonlindsay7139 3 года назад
Nice job! Thank you for the information. Very helpful.
@JohnCRV
@JohnCRV 3 года назад
Very welcome! Glad it was helpful!
@HealthyVeganLiving
@HealthyVeganLiving Год назад
Good tutorial John 👍Gary
@JohnCRV
@JohnCRV Год назад
Many thanks
@user-mk1ih7or5l
@user-mk1ih7or5l 3 года назад
Спасибо большое за полезное видео об установке дверей!
@derekjoelvoth
@derekjoelvoth 2 года назад
Thanks! The helped a lot
@JohnCRV
@JohnCRV 2 года назад
Glad it helped!
@ileafury
@ileafury 2 года назад
Thanks -- great video!
@JohnCRV
@JohnCRV 2 года назад
Glad it helped! Thank you for the feedback.
@lupox4561
@lupox4561 3 года назад
Interesting video. Greetings John.
@JohnCRV
@JohnCRV 3 года назад
Many thanks!
@livingyes
@livingyes 3 года назад
Great home project
@JohnCRV
@JohnCRV 3 года назад
Thank you! Cheers!
@Jan-yz6pl
@Jan-yz6pl 2 года назад
This is a really good video and it helped a lot of people so thank you for all your work and thoughtfulness and creating this video. I don't have a nail gun so is using a hammer the old fashioned way still a good way to sink the nails?
@JohnCRV
@JohnCRV 2 года назад
Thank you for the feedback. Hammer and nails works just fine. 👍
@juadee
@juadee 2 года назад
Nice
@JohnCRV
@JohnCRV 2 года назад
Thanks
@popularfood6440
@popularfood6440 3 года назад
Wow! Awesome job & video, my friend. Full watch & LIKE. Thank you for sharing. Take care.
@JohnCRV
@JohnCRV 3 года назад
Thank you very much!
@BonGalabansafe
@BonGalabansafe 3 года назад
Really good tutorial. Very helpful. Have a great weekend.
@JohnCRV
@JohnCRV 3 года назад
Thanks Bon, you too!
@michaelcook7836
@michaelcook7836 Год назад
Thank you Great video!!
@JohnCRV
@JohnCRV Год назад
Glad it was helpful.
@michaelcook7836
@michaelcook7836 Год назад
@@JohnCRV It's CRAZY that the previous owner had the full opportunity to frame in the opening for the bi-fold closet doors to the best size while building in the basement bedroom. Thanks to this video I can now cut the doors to fit the odd size !!! Now we know why the previous owner never installed the doors !! Ha .. Life saver for sure !!
@JohnCRV
@JohnCRV Год назад
@@michaelcook7836 I've seen it before when an homeowner just gives up and leaves things for the next owner. Have a great day.
@erikbostrom.9318
@erikbostrom.9318 2 года назад
Good vid.
@JohnCRV
@JohnCRV 2 года назад
Thank you
@VideoProduction100
@VideoProduction100 3 года назад
Great tutorial as always! Very well done! 👍 Greetings
@JohnCRV
@JohnCRV 3 года назад
Many thanks!
@renecuevas4128
@renecuevas4128 3 года назад
Tnks John😁
@JohnCRV
@JohnCRV 3 года назад
You're welcome
@AllenOxendine
@AllenOxendine 3 года назад
Nice work, thanks for sharing.. Hope you and your family are staying safe and well. Full View and Like always..
@JohnCRV
@JohnCRV 3 года назад
Thanks for the visit Allen. We are staying safe and are well. Hope you and your family are doing the same my friend.
@brandonmississippi1
@brandonmississippi1 3 года назад
Nice. So, theoretically, those side screws should secure it enough so that the bottom brackets should not have to be screwed to the subfloor? I'd like to avoid that as I have a laminate over concrete.
@JohnCRV
@JohnCRV 3 года назад
As long as the 2" screws reach the 2x4 frame, it will be plenty support. In addition to the screws you can get special glue to fill in the inside of the brackets to the floor as well.
@fritzpasquetjr9511
@fritzpasquetjr9511 2 года назад
@@JohnCRV What type of glue are you referring to for the bottom bracket to avoid having to screw it to the floor?
@JohnCRV
@JohnCRV 2 года назад
@@fritzpasquetjr9511 I had this one around but they also have a transparent one. Construction Adhesive: amzn.to/2Ig2GcL Hope this helps.
@fritzpasquetjr9511
@fritzpasquetjr9511 2 года назад
@@JohnCRV Great. Thank You!
@yesreports
@yesreports 3 года назад
Great tips
@JohnCRV
@JohnCRV 3 года назад
Glad it was helpful!
@transitvandoors
@transitvandoors 3 года назад
Great video, I am looking to replace some existing doors and had not considered bi fold doors, looks like I will need to have a re think.
@JohnCRV
@JohnCRV 3 года назад
Glad it was helpful Robin. When a swinging door in an hallway will be in the way, bifold or bi-pass slides are ideal. Thank you for the comment. Take care
@RaffaeleFontana57
@RaffaeleFontana57 3 года назад
Great video! 👍 Thanks for sharing my friend. Greetings 😊✌️
@JohnCRV
@JohnCRV 3 года назад
Thank you too Elio.
@billyoung8118
@billyoung8118 3 года назад
It looks to me like you installed a Jeld Wen door. That's coincidentally the brand I'm using. Mine has 5-recessed panels, looks like your's has 3 (not that it is important). My doors are too tall by 3/8". Do you think I can simply cut that away at the bottom and be done with it (won't have to glue the bottom part in since I'm not cutting away more than the thickness of that part)? I stuck a wire with a small bend into the pivot mount hole, and it appears the thickness of the bottom piece is right at 1". Cutting away 3/8" will leave 5/8" thickness (I will carefully cut away taking into consideration the blade thickness). Do you believe this 5/8" will leave enough support? This bifold door is for a new basement storage closet. It isn't something that will be used every day like a bedroom closet would. Thank you for your video!
@JohnCRV
@JohnCRV 3 года назад
Sounds like a plan. You should have plenty support left over inside the door. I suggest to staple some nails into it, just in case. Also, paint the bottom of the door very well, mopping soaks it and will swell up in time. Good luck.👌
@billyoung8118
@billyoung8118 3 года назад
@@JohnCRV Thank you for your very quick reply! I do appreciate it.
@renatapirro3277
@renatapirro3277 2 года назад
Thanks for the very helpful video John. I have one question. I’m an old lady & terrified of normal size circular saws. Do you think a 4-1/2” circular saw would work?
@JohnCRV
@JohnCRV 2 года назад
Yes, absolutely
@jirehmaria4923
@jirehmaria4923 3 года назад
Beautiful sharing and perfect indeed and I like the narration.
@JohnCRV
@JohnCRV 3 года назад
Many thanks! ✌ Welcome to our channel.👌
@rhythmrighters
@rhythmrighters 3 года назад
Awesome clear views of the install! LIKE
@JohnCRV
@JohnCRV 3 года назад
Thank you very much!
@jitzmaster
@jitzmaster Год назад
exaclty the problem I faced today.
@JohnCRV
@JohnCRV Год назад
Hope it helped.
@EnzoRapacciuolo
@EnzoRapacciuolo 11 месяцев назад
Hi, very good! Like 693.
@JohnCRV
@JohnCRV 11 месяцев назад
Thanks for visiting
@JT_70
@JT_70 8 месяцев назад
My daughter (lives in another state) needs me to replace a pair of missing bi-fold doors (1/2 of the double width doors) this week. Based on her measurements I may need to trim the width of the doors about 1/2” or so and may have to shorten the doors the same amount. I’m concerned about trimming the doors. Which side should be trimmed or does it matter? I’m concerned if I cut 1/2” off the door bottom that there may not be enough bottom mdf thickness to support the pivot pin. How should I deal with that?
@JohnCRV
@JohnCRV 8 месяцев назад
Its a gamble for the bottom. I would be very careful . Based on the type doors I had from HD. I would trim 1/4" on top and the other 1/4 from the bottom. For the width of the doors, you can trim about1/4” off the inside of the doors. Not the pivot or the end of the doors but the hinged inside doors. Hope that makes sense to you.
@jonwts48
@jonwts48 9 месяцев назад
Just asking, isn't it easier to just cut a 1/2 inch off both ends?
@JohnCRV
@JohnCRV 9 месяцев назад
Let me know how it works out if you do it that way.. I'm a little hesitant on trimming off that much, weakening the pin holes in the compressed wood is scary. But that's just me. Thanks for the feedback
@jonwts48
@jonwts48 9 месяцев назад
@@JohnCRV I do watch out for that but I haven't been called back yet on the ones I did. You do make a valid point though. I never went more than a half inch.
@jonwts48
@jonwts48 9 месяцев назад
I'm sorry I basically only worked that with full wooded bi-fold doors where the pin hole goes almost 2 1/2 inches down. Your video does explain very well how to do the ones where you got to replace the core Thanks
@JohnCRV
@JohnCRV 9 месяцев назад
@@jonwts48 No problem. Thanks for the feedback. Have a great day.
@casualcarolinafishing5835
@casualcarolinafishing5835 3 года назад
Usually losing an inch isn't a good thing. I hope you and the door had a nice long talk about why it was ok in this instance.😂
@JohnCRV
@JohnCRV 3 года назад
Good point! 🤔....😂😂
@mrnice9922
@mrnice9922 10 месяцев назад
Hi, my issue is my closet is not closing fully as space is about an inch smaller. Can I cut the each sides by half inch and paint?
@JohnCRV
@JohnCRV 10 месяцев назад
I wouldn't cut the hinge pin side, it may weaken it depending how it was made. I would cut the insides.
@mrnice9922
@mrnice9922 10 месяцев назад
@@JohnCRV Yes, and looking at video, it seems like door has 1 inch wood. Cutting. 5 inch will still leave. 5 inch of wood?
@JohnCRV
@JohnCRV 10 месяцев назад
Say that one more time? 🤔
@MrBath1985
@MrBath1985 3 года назад
I had a terrible time with the top pivot because it wouldn't spring back out and I couldn't get the plastic plug back out
@JohnCRV
@JohnCRV 3 года назад
That happens when it's hammered in too hard or the hole is not the same size. If it's damaged its easily replaced.
@Chewbigga
@Chewbigga Год назад
Is it feasible to reduce the door width size too? Also, would it need an even amount shaved off both long sides of each door? My closet I'm looking to put these in is 80" high and 70.5" wide.
@JohnCRV
@JohnCRV Год назад
A bit more complicated but it can be done by cutting same amount on each set of doors.
@Chewbigga
@Chewbigga Год назад
@@JohnCRV - If I were to shave off a quarter inch on each long side, how much buffer would I have before reaching the hollow core?
@JohnCRV
@JohnCRV Год назад
@@Chewbigga I've seen them 2" thick and never seen less than 1". You should be ok.
@Osirus1156
@Osirus1156 2 года назад
It annoys me to no end that modern doors don't really allow any trimming, they should have at least 2 inches of solid wood at the bottom of a door for carpet. But it makes me feel better that I can do the same thing I have been doing to my poorly designed Jeld-Wen interior doors to my bi-fold ones I need to install.
@JohnCRV
@JohnCRV 2 года назад
I know what you mean. Thanks for the feedback.
@ronyah.2489
@ronyah.2489 Год назад
What brand door did you use. We have this same problem. Did you start off with 80”?
@JohnCRV
@JohnCRV Год назад
You need a minimum of 1" play to be able to fit the door and have some adjustment room. If you can you want 1 1/2". Jeld-Wen Hollow Bifold Closet Door www.homedepot.com/s/jeld-wen%20hollow%20bifold%20closet%20door?NCNI-5
@beebeesfuntasticadventures6110
@beebeesfuntasticadventures6110 3 года назад
Good job.
@JohnCRV
@JohnCRV 3 года назад
Many many thanks BeeBee's ✌
@giuseppegulino
@giuseppegulino 3 года назад
MIO CARO AMICO MOLTO CARISSIMO DALLA SICILIA UN CARO DSALUTO CON MIO CUORE E GRAZIE DI CUORE PER IL TUO BELLISSIMO IMPORTNTE E INTERESSANTE VIDEI STUPENDO LAVORO DELLA STUPENDA PORTA DA TE LAVORATA COMPLIMENTI DI CUORE DALLA MIA ITALIA UN CARO SDALUTO TUO MICO GIUSEPPE
@JohnCRV
@JohnCRV 3 года назад
Grazie Giuseppe. E' sempre un piacere di sentirti.
@mindyamato4083
@mindyamato4083 2 года назад
What about the width!? My doors are tight as well as high, so I would need to cut both! Would that work?
@mindyamato4083
@mindyamato4083 2 года назад
Please respond!! Your video was amazing!
@JohnCRV
@JohnCRV 2 года назад
I've seen it done, Sure.
@mindyamato4083
@mindyamato4083 2 года назад
Thank you. Just taking off a quarter inch to start! I don't want to ruin the predrilled holes, but I cant fit in the width.
@JohnCRV
@JohnCRV 2 года назад
@@mindyamato4083 Sounds like a plan. Just make sure you paint the bottom with 3 coats of good paint is my best advise to you. Mopping over time makes the compressed wood they use these days bubble up.
@gateslattes4686
@gateslattes4686 2 года назад
Couldn’t u cut a bit off top and bottom so u didn’t need to make repairs?
@JohnCRV
@JohnCRV 2 года назад
Up to you but once you remove 1/2 the support on compressed wood it may fail by the pin holes. I guess it depends how rough it's used.
@willg8796
@willg8796 3 года назад
Your doors are supposed to be 1-5/8” smaller than your net vertical opening. Example: 80” net opening? Subtract 1-5/8” = 78-3/8”. Your doors should be 78-3/8” high. That accommodates your hardware. You’re welcome.
@JohnCRV
@JohnCRV 3 года назад
👏👌
@beerhistory
@beerhistory 2 года назад
Thanks for this. When you say "net opening" are you including the hardware? So would I measure from the top of the bottom bracket to the bottom of the top track?
@daffiehalley7723
@daffiehalley7723 3 года назад
I get shortening the
@daffiehalley7723
@daffiehalley7723 3 года назад
I get shortening the door,but I need to also narrow it. Do I cut 1/2 distance from both panels
@JohnCRV
@JohnCRV 3 года назад
you can.
@RebootedNickerson
@RebootedNickerson 3 года назад
Dude this guy sounds like he should be narrating a mafia documentary. 🤣 Great video.
@JohnCRV
@JohnCRV 3 года назад
ok SONNY😂 or should I call you Sal🤔
@patricksears163
@patricksears163 9 месяцев назад
Nice video but no way I'm wasting time on some cheap fiberboard disaster like this.
@JohnCRV
@JohnCRV 9 месяцев назад
You can get real wood maybe but had to find these days... Also you don't want these bifolds too heavy. Thanks for the feedback...
@pauls5571
@pauls5571 2 года назад
You’re supposed to cut both top and bottom of you need more clearance- as per instructions. Then you won’t have to worry about cutting the filler out and having to re-glue it in place.
@JohnCRV
@JohnCRV 2 года назад
Thanks for the feedback
Далее
Cutting Bi Fold Hollow CORE DOOR
7:51
Просмотров 32 тыс.
How to Install Bi-fold Doors From Start to Finish
20:32
나랑 아빠가 아이스크림 먹을 때
00:15
Просмотров 6 млн
Useful gadget for styling hair 💖🤩
00:20
Просмотров 2,1 млн
Installing BI-FOLD Doors For Absolute Beginners..
12:50
Convert Your Bi-Fold Doors with This Trick!
6:16
Просмотров 238 тыс.
How to Cut Down a Door | Height and Width Adjustments
11:29
How To Install Bifold Doors For Your Closet! | DIY
8:12
How to adjust your bifold doors
4:19
Просмотров 569 тыс.
Steves & Sons Bi-fold Door Installation
4:35
Просмотров 219 тыс.
나랑 아빠가 아이스크림 먹을 때
00:15
Просмотров 6 млн