Dear ma ,my question is,under bust tightening and waist dart extension from UB in this video why is it different from Off shoulder video on bust tightening
Thank you so much for the video. Please i want to know is the yoke tightening only applicable to straight bustier or it can also be use for princess armhole bustier and how do u do the yoke tightening for armhole princess bustier
If the person is busty come down by 2 inches below the underbust. If the person is not busty you do 3. But note that it's always good to measure for accuracy
Thank you so much Ma🤗 Please when cutting the lower bodice, do I use the back half length to cut for both ? Or do I use both the front and the back half length to cut the lower bodice? I am afraid it might not join well at the end.
If your gown length is 40 and your front waist length is 15, subtract 15 from 40 and you will have 25, you will use 25 to cut for both the front and the back lower bodice. So you are using the front half length not the back
Mam yoke part comes tight . because its closed neck means not deep neck blouse.n you are giving d sleeve also.after wearing its pulls down n makes too tight in d yoje area.pls reply
Just coming across this and i really wish you can help respond ASAP ma. So for the shoulder tightening at the front panel, after drafting it and placed it on the back shoulder, it didn't match ma. 😢, what can i do. Since we didn't tightening the back shoulder
Please check your drafting well. The tightening was done on the body of the yoke not on the shoulder. But if in case you took some part of the shoulder away then you have to remeasure the shoulder and add it back. Note, the back and front yoke has to be equal ONLY at the shoulder
@TataT10,just measure yourself or your client,from the front shoulder to the waist,write it down, and measure the back too,from back shoulder to the back waist,write it down.you will notice that the front waist length is longer.when you subtract the back from the front length, the answer will be your bust dart..
