In this video you will learn how to disable SpeedBox 1.2 for Bosch on your e-bike without having to physically uninstall it. Our social media: FB: / speedboxen IG: / speedboxtuning TT: / speedbox_tuning TW: / tuningspeedbox
Hi. SpeedBox 1.2 for Bosch is for e-bikes with a magnet on the rear wheel rim (so-called Rim Magnet). If you don't have this rim magnet, we recommend SpeedBox 1.1 for Bosch www.speedbox-tuning.com/p/speedbox-1-1-for-bosch#1922
What should I do if I can't deactivate the function using the combination shown first in the video because speed manipulation detected error 524001? No speed is displayed anymore, and I also can't deactivate the chip. I see no solution. Please provide me with a fast solution for the mentioned problem here in the commentary section greetings
Hello, Don't worry, here are the instructions 🙂 1) First, uninstall the tuning using this method: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dCuxoid3u4M.html 2) If you have error 524001, you will need to visit a bike service or ride 90 minutes without assistance. You don't have to do it all at once; you can stop and restart the rides. 3) Then ride a few kilometers with assistance, just 5-10 km will do. During the ride, occasionally switch between the assistance modes and gears. 4) Then reinstall the SpeedBox according to the instructional video. 5) When you are looking for the Rim Magnet Simulator signal, set the derailleur to the middle gear. Do not spin the rear wheel, just turn the crank by hand. 6) If you have any further questions, write to our support at speedbox-tuning.com Thanks.
@@SpeedBoxTuning but it Shows no speed on the Display anymore also after plug in the Main rim sensor etc the walking Funktion is also not avaibele with the error Code so i cant even start the 90 minuts right?
@@BenjiBenji989 Hello, If you don't see any speed displayed on the screen, try checking if it appears in the FlowApp. You can try riding without assistance for this product even without deactivating it. 90 minutes is the maximum recommendation. From experience, we know that error 524001 can be cleared earlier.
I had this problem, too. Instead, it showed driven distance and time without speed showing... it was like 20 seconds and 10meters. But now, when error code is gone, it shows speeds 11 and 12 also when using combinations. And also, bosch says that this can be done 3 times, after that it is permanent error and need service dealer.
