Thank you - this video was so helpful - it allowed me to strip it back to clean out years of coffee grime. I also removed the hopper to clear the top of the grinder. My mistake however was to take the top of the hopper off, and I am unable to replace it correctly as the machine throws error 14, and if I take the top of the hopper off again there is no error. Im pretty sure its something to do with getting the correct position of the sliders - do you know how to position it correctly?
Great video, my machine starts grinding as normal then I can hear the grinder run even though its not grinding coffee for a few seconds after. Is that because of the coffee strength set or is that a fault with the machine? Its a new machine
Hi! Maybe grinder level is so Fine? If the machine is new i dont think there can be some defect! But always exist some mistake/defekt. Try change grinder to a coarser.
Any idea why water is leaking out of the sides of the machine instead of brewing coffee? I replaced the drainage valve, but the issue persists. Thanks for any advice!
I have this machine & it doesn’t get as hot as I’d like, any way to increase milk temperatures. Also it has a leak that ends up all over the kitchen side if there’s a common fix for this ?
hi. i have this machine, milk pump sounds as normal, delivery spout rubbers & pipe clean & clear, steam is delivered as usual but no milk pulled from the tank. looks like could be the pumps not pressurising for suction. any ideas please
hi thanks for the video i have a problem with the meliita barista t grinder the beans no going down and then the stopped massage to fill beans what can be the problem? do i need to open to clean the grinder itself?
Yes i think you nees to clean grinder first and then see whats the problem! Maybe grinder blades are already wear out , maybe there are something stuck!
@@coffeetricksandtips1018 Same problem here, i am seeing is more common that it should... :( I will try to disassembly it and clenei THANK U SO MUCH FOR YOUR TUTORIAL! IT WOULD BE NICE ANOTHER ONE DISASSEMBLING THE GRINDER... ;)
Yes you can indicate in the menu if you are using a filter cartidge or not. When using a filter cartridge, the warning ro replace the filter comes automatically. If you do not use a filter the device gives you a warning to descale after an (x) amount of created bevarages.
I have a model T without smart, but it has the same motherboard on which there is a radio module. Any idea how to activate the radio module? He is physically present.
hello, you seem to understand alot from this machine, im having an issue, after the machine grinds the coffe beans it tryes to "compress" the grinded coffe but it makes a weird noise like it has no strenght to compress it and the coffe program just cancels, do you know any solution for this?! cheers.
Hi! There can be few problems! Something with coffee brewunit(block) try to take out and clean! Maybe some of microswitch not working or electric problems, also maybe brewunit motor working bad.
Any idea why water is leaking out of the sides of the machine instead of brewing coffee? I replaced the drainage valve, but the issue persists. Thanks for any advice!
Hi there, Would you have any clue why my exact same machine is not working, on the screen its stuck saying that the power door is still open, only it not open. Now i can't use the whole thing because of the message on-screen? Any advice would be very much appreciated cheers
I have this machine & it doesn’t get as hot as I’d like, any way to increase milk temperatures. Also it has a leak that ends up all over the kitchen side if there’s a common fix for this ?