Love it but what did you use to make the vinyl stick to the mat before cutting you used the scraper to secure it to the mat to keep it from moving but did you have to pull the backing off the vinyl first (something we wouldn't usually do) need to know this step any help would be greatly appreciated. Thank you.
We ordered the names from a shop on ETSY. It should not be hard to DIY if you have a Circuit. You would just have to make sure to get a blade that can cut acrylic. I will try making a video soon that will show how you can DIY them.
No we didn't but we will be making one this month. We did use a custom font for this project but in the upcomimg video we will talk about how to choose your font.
We plan to make another video to show how to design in circuit space really soon. Tips: use a bigger font. Try to make sure the letters in the font have a little space between them. Also, use a new blade. We hope these tips help.
Try using a bigger font and a new blade. Also, do not skip the step at 3:54. That step is really important when making sure the words don't come up. Be sure to go slow when you peel the vinyl. If you see any letters coming up lay the vinyl back down and repeat 3:54 on the word/letters coming up. We hope this helps.
I put the blade cut on less & it still cut too much. Even tho I peeled words b4 but w/this project.. All My words didn't peel right so I gave up for the moment
@@keyawright6736 be sure to use a fresh blade. We had that problem but it was better with a new blade. Also use your picker tool for stubborn letters and pull the extra vinyl off slowly.
