If your YG90 displays the error code E10, it suggests a communication issue with the throttle, headlights, motor, or possibly the controller. Here's how you can identify the source of the problem:
1. Turn Off and Disconnect Everything: First, disconnect all wires except for the display screen.
2. Check the Display: Power on and observe the display. If only the display is connected, it should show a different error code (such as e008).
3. Reconnect Wires One by One: Connect each wire one at a time, and each time you connect a wire, check if the E10 error appears. If it does, it indicates that the component connected to that wire is faulty.
4. Locate the Faulty Component: Once you've found the wire that triggers the E10 error, you can confirm that the associated component is the issue.
Consider the Controller: If none of the wires cause the E10 error when connected (instead showing other errors), the problem may lie with the controller.
Secure Connections: If, after reconnecting all wires, the E10 error disappears, it was likely caused by loose connections. Ensure all connections are tight and secure to prevent it from happening again.
By following these straightforward steps, you should be able to pinpoint the cause of the E10 error and address it accordingly.
15 окт 2024
