How to Draw Head in different angles using Andrew Loomis method Part 2- TURN ON SUBTITLES 

You’re welcome and thanks thanks to you too for commenting 😊 Glad to know it helped you.

You're welcome and thanks to you too for commenting😊

Kiya ap merko sikha sekte ho

I am glad to know that it helped you. Thanks for commenting😊

1

You're welcome Azethine and thanks a lot for commenting👍🏻✋

@@SanjogSinnarkar if u'd like, maybe put "turn on subtitle" at title / first line of description instead of bottom, and perhaps in caps coz its so useful and a must see and i would have missed it if i didnt watch this video twice

Hey Azethine, thanks for the advice. Even I was thinking that it should be prominent and people should not miss it. I will do that thanks.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

You are welcome and thanks for commenting

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

You’re welcome and thanks to you too for commenting 😊

you're welcome. That's great to know. Thanks for you commenting, it motivates😊

You're welcome and thanks a lots for the motivating commet 😊 I am happy to hear that you are using it in your method.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Hey Ruth Terry, i am so glad to hear that it helped you. 👍🏻🙏

Thats great. Sure you will become 👍🏻👍🏻

Hello

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

This means a lot to me thanks a lot for commenting 😊

My apologies for replying so late …Thanks a lot for commenting. After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So now, in total u have six equal parts. Now, extending the bottom line of the first and fifth part will give you the length of the oval (inner circle). One suggestion keep paper aside and make the markings as you read and follow the instructions point by point. Let me know in case of any confusion or any clarification. Thank you 😊

@@SanjogSinnarkar Oh I understand, then it is not necessary to start with the two circles, only with the reference lines and from there take the measurements of the circle, thank you very much I will try it now.

​​@@SanjogSinnarkarSe for possível, faça um vídeo desses passos, essa dúvida do tamanho do circulo interno sempre me deixou com problemas para saber se estava no tamanho correto, se bem que acho que entendi o que você escreveu, mas seria interessante um vídeo sobre o circulo interno, que eu acho que é mais difícil de acertar o tamanho correto para muita gente. Obrigado.

Glad to know you liked it. Thanks for commenting 😊

Thanks for commenting 😊

Likewise 😊

Thank you for your comment. Please check my other videos from the loomis playlist, I have covered most of the stuff

@@SanjogSinnarkar Great! I’ll do that. Thank you so much for your reply.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Thanks a lot for commenting 😊

You’re welcome and thanks to you too for commenting 😊

Thank you 😊

Thanks a lot After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now if u extend the bottom line of the first and fifth part will give you the length of the oval. One suggestion keep paper aside and make the markings as you read and follow the instructions point by point. Let me know in case of any confusion

@@SanjogSinnarkar Thanks a million for your guidance.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Hey thanks for stopping by and commenting😊 Sure I will add voiceover for future videos👍🏻

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

You’re welcome 😊

You’re welcome and thanks for thanks fir commenting

You're welcome and thanks for commenting

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Thanks for commenting. I have already created one. Check the link below of the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zV58FBvrGt4.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

That’s okay 😊

When you will practice then you will be perfect

True 😊

​@@SanjogSinnarkarthanks sir for replying

Glad. Thanks to you too for commenting 😊😊

Thank you. Sure, soon I will show videos on figure drawing

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

You're welcome and thanks to you too for commenting😊😊😊

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now if u extend the bottom line of the first and fifth part then it will give you the length of the oval. One suggestion keep paper aside and make the markings as you read this and follow the instructions point by point, it will be much more clear. Let me know in case of any confusion

@Adrien Agreste will create video sometime later

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Muito obrigado

Thank you

U can buy the transparent ball on amazon

Thank you 😊

You are welcome and thanks for commenting

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

@@raghavnigam3287 mark 4 points vertically and horizontally with equal distance. Hold pencil lightly and try to draw circle touch those four marks. This way you can make sure its circle and not oval.

Thank you 😊

Thank you

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

After dividing the circle into 2 halves, divide the upper and lower half into 3 equal parts. So in total u have six equal parts. Now, if u extend the bottom line of the first and fifth part will give you the length of the oval. One suggestion keep paper aside and make the markings as you read this and follow the instructions point by point. Hope this helps.

Thank you. Here is the link Part 1 - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IECbyNuC6AA.htmlsi=CvRf7g-mhqDqAx1g Part 3 - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zV58FBvrGt4.htmlsi=xdL1ol7ll6jYTa9Z You may check check my playlist, there are other loomis videos as well.

Hi Thatcrazygirl I have recently created video on features. Please find below the link for the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OI4X1jtWQAk.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

It may take anything between 5-15 years depending upon your skill level and time given to practice.

Hi Milenadelapena, Please check my playlist named “Loomis”

Next video will be the left side of the head and in future head turnarounds.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Lol she made ownself Even you can do that on round shape like tennis ball

Thanks 😊

Its difficult to explain the process. It cannot be covered in one single video. Its big big topic where a series of videos needs to be created.

Learn The Fundamentals of Anatomy.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Thank you 😊

Thank you

There is no specific requirement, it depends on the head type 😊

You can buy fillable ornament ball from Amazon and make markings on it.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Thank you 😃

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Thanks😊

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

I have created at home

@@SanjogSinnarkar what did you make it out of?

Bought Christmas ornament fillable ball and drew suggestive lines.

Sure. Stay tuned 😊😊

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

AiMSTAR 96 You can buy the clear plastic ball and make your own markings as I have done

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Thank you 😊

Poda

Maybe you don't practice enough or you use the wrong technique.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Anonymer Nutzer I will👍🏻

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

😊😊

Front view is already done, pls check part 1

😊

Sir mujhe sketch penting sikhna hai

@@SanjogSinnarkar hello sir

Hello

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html

Hi sumedh Sonawane. I are talking about the speed? Can please elaborate Thank you

???

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_03tN94oMsA.html