How To: Dressing Ethernet Cables Into a Patch Panel

Подписаться 9 тыс.

Просмотров 18 тыс.

50% 1

In this week's video our Technical Manager, Don Schultz, and Technical Specialist, Dave Harris, give you a quick walkthrough on how to dress your Ethernet cables into a patch panel prior to termination! This should help clear up any confusion you have surrounding this subject and leave you feeling prepared to give it a try yourself.
If you found this video interesting let us know in the comments and subscribe for more!
Video Time Codes:
[0:00-0:29] - Intro
[0:30-1:38] - Overview
[1:39-3:02] - Putting Cables in the Right Order
[3:03-3:54] - Marking Your Cables
[3:55-4:34] - Cutting Your Cables Correctly
[4:35-5:38] - Final Steps for Termination
[5:39-7:06] - Closing Thoughts & Outro
trueCABLE Products Featured in This Video:
Cat6 Riser Unshielded: www.truecable.com/products/ca...
trueCUT Heavy Duty Cable Cutters: www.truecable.com/products/he...
All trueCABLE Products: www.truecable.com/collections...
Check out trueCABLE on Social Media!
Instagram: / truecableinc
Facebook: / truecableinc
TikTok: / truecableinc
LinkedIn: / truecable
Learn more in our Cable Academy!
www.truecable.com/blogs/cable...
Trouble finding the right Ethernet cable for your project? Check out our Ethernet Cable Finder!
www.truecable.com/pages/guide...
Need help finding the right connector for your Ethernet cable? Check out our Connector Finder!
www.truecable.com/pages/conne...

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@andrellhardy2652 4 месяца назад

Great video! I’m working on a home network plan with Starlink. Good points to consider. I’ll be adjusting my plans immediately. Thanks!

@NolanRollo Год назад

Don't use sharpie on the permanent label. Right before you cut is a good time to apply 606 compliant labels

@trueCABLE Год назад

Hello Nolan and thanks for pointing that out. That is good advice. Following ALL of the ANSI/TIA standards is a good idea, including ANSI/TIA 606-C.

@stihur2639 Год назад

No service loop?

@trueCABLE Год назад

Hello and thanks for comment. Keen eye. No, a service loop was not demonstrated here. The focus of the video was to demonstrate the dressing process but it was as oversight as a service loop would normally be included. At some point a revised video will be posted that includes the service loop.

@iceburg018 Год назад

The service loop would go behind the plywood

@Qazxswer68 4 месяца назад

Good job not watching the whole video 🙄

@coryr3565 4 месяца назад

there are so many things wrong with this video I don't know where to start! And YES I am an RCDD

@trueCABLE 4 месяца назад

Thank you for taking the time to share your thoughts. We're sorry to hear that you found some issues with the video. We genuinely value your feedback, and we'd love to address any specific concerns or questions you might have. Could you please provide more details or let us know specific areas you feel need clarification or improvement? We're always striving to improve, and your feedback is crucial in that process.

@rb8049 2 месяца назад

You could start at the top, bottom, or middle. Just make a list.

@trueCABLE 2 месяца назад

@@rb8049 Indeed! Make a list and check it twice :>). In all seriousness, if you cannot put a label on the panel itself, then a label on the permanent cable and then on the patch cord used to patch into your switch will suffice.

@VicFortyTwo Год назад

That fast-forward video effect that simulates a VCR was amusing the first time, and annoying after that.

@trueCABLE Год назад

Hi there! I am the Marketing Manager here at trueCABLE. We appreciate your feedback and I will pass it along to the rest of our team for future videos that we create!