Your video and explaining was very concise, comprehensible and very straight forward, speaks clear and detail, I was a little frustrated during re-assembly, but your instruction got me out of the ditch! looking forward to see more youtube from you in the future! Thank you so much! 💡💡💡😅
Excellent video. Just got a hi capa clone today and this was a HUGE help in taking it all apart and reassembling. Almost lost the pins for the safety mechanism, but thank god they were on my desk, just hidden since I have a black desk mat and they're black parts haha
Great vid. I just got an Army Armaments 1911. Worked great first 5 or so mags, then I tried a hop adjustment and now it's messnig up, feed nozzle sticking in the barrel, all kinds of fun. Gonna need all the help I can get so these kinds of vids are much appreciated!
Thank you so much man for this video, the mainstream airsofter tech vid wasn’t able to explain as much as you were able to. this helped me save my wallet trying to fix my hi capa😊
Brilliant Vid! Always worried about taking my rifs apart but this showed me how easy it really is. Hop up adjusted and back to working order in seconds! Thanks for the helpful video!
Thanks for the video very very helpful as I have no clue what is what 😁 my gun Entire inner and outer barrel is wobbly is that how they are os main is defective
My slide lock pin is loose and sloppy when fully inserted, is there a grub screw or compression washer on the lower receiver to make the slide lock pin tight when fully inserted? Cheer Stew
Thanks for the Video, though I do have a question and maybe you can help So I use my Vorsk Hi Capa with an HPA Mag Adapter, at some point it just straight up stopped shooting, put in a new Valve Knocker ( the original seemed a bit dinged up ) and changed the Valve on the HPA Adapter to a Neo R, worked great until the Valve Knocker didn't reset properly when the slide racks back( so when the little metal piece pushes the spring down ) gonna edit this when I try out the old Valve Knocker again with the new Valve to see if that fixes it and it's just the new Valve Knocker, but what might be causing this? The heavier material of the new Valve Knocker maybe?
The grip safety on my TTI JW3 2011 is not working (I can shoot the gun without pushing on the beavertail). Does anyone have any idea what the problem could be and/or how to fix this? I read somewhere that it could have something to do with the leaf spring but I'm unsure. (I'm pretty new to airsoft).
Hi Thank you very much for this video. He helped me a lot to get to know my hi-cap. My son and I are new to ASG. I recently bought a used Hi-CAPA 5.1 from Golden Eagle. Unfortunately, there is something wrong with her. It cannot be reloaded. It is impossible to engage the left safety, move the barrel backwards or pull the hammer back. The trigger is also blocked. I took it apart according to your video and put it back together, lubricating it with BRUNOX. After installing the barrel, it can be undone but only once. After pressing the trigger, the hammer moves vertically and the weapon locks again. After verifying the operation of all elements, I found that when I lower the right tongue in the gun body slightly (1 mm) with a thin knife, it unlocks, but only once. The gun looks almost new and has no major signs of use. Nothing is cracked or broken. I checked all its elements. Can you suggest why this might be happening? Any help would be appreciated.
yo! Do you got any fixes for a hammer that is stuck down completely, ive been trying to fix this problem in and out for a long time now, it the hammer is fine until i have to cock it down to put in the left safety switch, and then it is stuck down, the only way the safety goes in is if i pull the hammer down, which then, makes the hammer stuck!!! Please help, keep in mind, this is all before I put in the leaf spring, and put the frame in the grip etc…
With running out of gas, try purging the mags as you may have an air lock inside it preventing you from getting a full fill. With the random burst either your sear spring needs to be re bent or your disconector is wearing down and needs replacing