How to Edit 3D Video taken with Fujifilm W3 3D Camera (2022)

Подписаться 1 тыс.

Просмотров 3,5 тыс.

50% 1

This video is a How to tutorial that shows you how to edit a 3D video that has been taken with the Fujifilm W3 3D Camera. This is a supplemental video to the video "How to Edit 3D Video (2022)" (link: • How to Edit 3D Stereos... ) that explains some of the specifics relating to this 3D camera.
Fujifilm used to provide its own export and limited editing functionality with its FinePix Studio PC Application. But this is no longer available. So here I describe how some of these functions can be performed manually.
Chapters
00:00 Start
00:39 Overview
02:13 Make SBS video from AVI
08:45 Split into left and right from AVI
12:30 Wrap-up
The processing requires ffmpeg to be installed on your PC. Here are pre-prepared one liner command that you can use to process your videos. Feel free to copy and paste them from here so that you don't have to type them out from scratch yourself.
𝗠𝗮𝗸𝗲 𝗦𝗕𝗦 𝗳𝗶𝗹𝗲 - To create SBS video from Fujifilm AVI video file:
For %f in (*.AVI) do ffmpeg -i "%f" -filter_complex "[0:0][0:2] hstack=inputs=2 [out]" -aspect 1.7777 -vcodec libx264 -x264opts frame-packing=3 -map [out] -map 0:1 "%~nf_2x1.mp4"
Specify an aspect ratio that matches the aspect ratio of the AVI file. That will then result in a half width SBS file. If you want to have a full width SBS file leave the aspect part out altogether.
𝗠𝗮𝗸𝗲 𝗟𝗲𝗳𝘁/𝗥𝗶𝗴𝗵𝘁 𝗳𝗶𝗹𝗲𝘀 - To create individual left and right eye videos from Fujifilm AVI video file:
For %f in (*.AVI) do ffmpeg -i "%f" -c:v libx264 -crf 19 -preset slow -an -map 0:0 "%~nf_l.mp4" -crf 19 -preset slow -map 0:2 -map 0:1 "%~nf_r.mp4"
Links to related videos:
• The video above is intended to be a supplement to the more general video on "how to Edit 3D Video (2022)" here: • How to Edit 3D Stereos...
• Video on the Fujifilm W3 3D camera that references the old FinePix Studio that is no longer available: • Specialised Photograph...
Some useful links:
• ffmpeg download ffmpeg.org/download.html
• ffmpeg documentation: ffmpeg.org/documentation.html
• How to install ffmpeg on Windows video: • Install FFmpeg on Wind...
• How to install ffmpeg on Windows another video: • How To: Download+Insta...
Hope you find this useful. Do let me know your feedback in the comments.
Disclaimer: The information including the command line code provided here is on an "as is" basis and ANAVision has no obligations to provide support, update, enhancement or modifications obligations with respect to this. In no event shall ANAVision be liable to any party for direct, indirect, special, incidental, or consequential damages, including lost profits, arising out of the use of this, even if ANAVision has been advised of the possibility of such damage.

Наука

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@lindakazandjian7059 2 года назад

Great explanations as usual, thanks! Looking forward to the gimbal video as I own a W3 camera as well ;)

@ANAVision 2 года назад

@Linda Kazandjian, thanks for the feedback. I hope to get some time to do the gimbal video soon.

@BRinMilwaukee 8 месяцев назад

Thank you for this! My FujiFilm 3D camera has new life-- before I could only look at my 3D pictures/videos on the back of the camera itself, but I discovered I can look at them in my VR headset as well. Unfortunately, I could only look at the 3D picture files.... but NOW all of my 3D videos can be viewed there as well, thanks to your help!

@ANAVision 8 месяцев назад

I'm glad this helped :)

@brettharrison8280 5 месяцев назад

FANTASTIC! Thank you so much!

@vaiisbetter Год назад

This worked perfectly, thanks!

@ANAVision Год назад

Glad to hear this. All the best.

@gotland80 2 года назад

Agree, Fuji is the best, so far.

@ANAVision 2 года назад

Hey great to hear confirmation on this. Enjoying your Fuji :)

@NathanJayMusic Год назад

I've had this camera for 2.5 years and now I can finally edit 3D vids! Bizarre how the Finepix software I have only lets you watch in anaglyph or interlaced which doesn't work on my Panasonic passive. MASSIVE THANK YOU! EDIT: When I drag the files into my edit software (Magix Movie) I get no video and have to convert the converetd files in VLC. If anyone knows how to get around this please comment

@ANAVision Год назад

Thanks so much for your feedback :) Much appreciated! I hope that get an answer the Magix Movie question to optimize your workflow. If you find a solution yourself, please also post it here for interest.

@moviebod Год назад

Excellent video. I have the W1 at the moment and I love taking stills with it. I haven't bothered with the SD video capability.

@ANAVision Год назад

These days, it's definitely a more suitable camera for the still images. I'm glad you are enjoying the camera.

@oebleh 2 месяца назад

Great !

@kbqvist 2 года назад

Thanks, helpful as always :-)

@fotolenticularbogota 2 года назад

Impresión Digital lenticular

@ANAVision 2 года назад

Thanks for your feedback @Karsten Bruun Qvist. Always good to hear from you.

@pavinder 2 года назад

Thanks so much for including the script commands in the notes! Incredibly helpful. I just bought the W3 (mainly for stills) but am looking forward to your gimbal suggestions too. I see the new Qoocam Ego has just been released which does have higher resolution and better image quality than the W3. But it still lacks all the manual controls, zoom lens and other shooting functions of the W3, so I'm keen to prove that when used with Photoshop post-processing, the W3 is still the best 3D camera to have!

@ANAVision 2 года назад

How are you finding the W3 that you bought? I also see the Qoocam Ego and am keen to give it a test drive sometime. For now, still using my W3.

@ANAVision Год назад

Paul, I've had a look at the QooCam now. If interested you can have a look at my review of it here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HtE0AFoRhK8.html

@brettharrison8280 5 месяцев назад

I know exactly what you're taking about. I bought an Ego 2 weeks ago, and a W3 this week. I'm so glad I did! I'll use both, for slightly different purposes. Horses for courses.

@davidlong8500 Год назад

I use PowerDirector and Vegas Pro. Both recognize the avi file as 3d. I can edit and then produce/render side by side etc. No conversion necessary.

@ANAVision Год назад

Thanks for sharing. I've also used Vegas Pro and found this to handle 3D video editing quite well. How are you finding Power Director in comparison?

@davidlong8500 Год назад

@@ANAVision I prefer Vegas because color grading is easier. In PD you can only do one file at a time in Color Director. Also in Vegas you can output 10 bit if you have the file to do that. That being said if you are not doing much color grading and rendering 8 bit. PD is easier.

@ANAVision Год назад

@@davidlong8500 thanks for the insight - I appreciate that.

@staticcharges Год назад

Thank you for this video. I have found I can greatly improve the quality video by running it through Topaz Video Enhance AI an even scale it up. I then run it though a frame rate increase through a tool list SVP 4Pro to get the frame rate up to 60 FPS, from 24 FPS. This makes the video much smoother and looks beautiful on a Quest 2 VR headset and 3D TV. The difference in dramatic.

@ANAVision Год назад

sounds amazing, I'm going to have to try this :)

@digitaljackson3891 Год назад

@@ANAVision I just got back from a Europe trip and have a lot of video footage shot with the Fujifilm W3. I would love to see a video detailing the process of taking W3 shot video through a tool like Topaz Video Enhance to upscale, stabilize, and increase frame rate with output to a final SBS format video.

@ANAVision Год назад

@@digitaljackson3891 I imagine that the order in which you do this would be quite important and would need some experimenting. In my thinking it's important to do the stabilizing step after SBS is stitched together, as otherwise you could get into parallax and misalignment issues.

@digitaljackson3891 11 месяцев назад

@@ANAVision I watched your other video on editing 3D stereoscopic videos (very helpful) and see that you nested the left and right footage in Premiere so that the same stabilization operation applies to both. Since Topaz does not have the ability to nest footage, I was thinking Topaz first to upscale/enhance the separate left and right footage (and maybe increase frame rate). Then, with left and right still separate, going to Premiere or DaVinci Resolve for stabilization, color correction, etc. My thinking is that stabilizing with SBS stitched together will cause smearing along the edges versus using a cropped stabilization on the separated left and right footage which will eliminate edge issues. Processing stereoscopic footage is a new thing for me so unsure if this method will work.

@ANAVision 11 месяцев назад

@@digitaljackson3891, any operation on the video that could cause shifts in the image are the ones you need to be careful about. Upscaling, color correction, enhancements, possibly even frame rate changes are generally pixel operations, and don't transform the image position and are hence relatively low risk. You can do these anywhere (separate or together). But stabilization has the risk of causing shift transforms differently to each eye, hence for that I would recommend using the same algorithm on both (either by combining image as SBS prior to processing or bundling in other way such as nesting)

@thevoyager7023 4 месяца назад

Hi Andreas, very good video. Even for me, who has Not used the command line for more than 3 decades it was possible to convert some ten year old fuji 3D videos. The loop in your script did not work for me on Sonoma. But I could handle it. Unfortunately it did not work to view it as a spacetial video on Apple Vision Pro. Do you know the correct Parameters for it?

@zachyenwaykin 7 месяцев назад

Hi, could you explain gimbal hack? I hope to get some pointers if possible. Am planning to do a short trip with a Fuji w3 next year, which is just a couple of weeks away so am really considering whether I really need a gimbal or not. Buy or skip. Hope you can help. Cheers.

@user-ji9qc4pi8x Год назад

thank you for great video, I followed the instructions for fuji 3d with great result, but the mp4 video does not play on lg tv, I had to use convertor, is it possible to modify the ffmpeg command to produce mp4 for lg tv. thank you again.

@ANAVision Год назад

What convertor did you use?

@user-ji9qc4pi8x Год назад

@@ANAVision( any dvd convertor pro.) with LG TV conversion.

@valentineepstein839 Год назад

Very good video. I have this camera and still can't figure out how to make it to show the date of shooting on the picture. Please advise. Thank you.

@ANAVision Год назад

Thank you for your feedback. In general, I would stay away from using a cameras feature to add a timestamp to the image even if the feature was available since it permanently changes the image. In the case of the Fujifilm you are quite right, you don't even have the option. I would rather take a clean image and add it later using the file timestamp or metadata. There are several ways of adding a timestamp to your image using your computer. I'm linking this article as it may help with this: www.findingtheuniverse.com/how-to-add-a-date-stamp-to-photos/

@songluo1226 7 месяцев назад

Hi! When I run the command that makes the SBS file in Terminal on Mac. Terminal responses "zsh: unknown file attribute: V". I correctly installed ffmpeg on my Mac. Do you know what's the problem?

@karlrosell3035 2 года назад

Hi! I wonder in what program could I edit the pictures Ive taken with the w3? I’m totally new to the scene and would be very happy to be able to download an editor such the one Fujifilm had but as you said are now closed for downloads. Any tips? =)

@karlrosell3035 2 года назад

Im working on an iPad Pro!*

@ANAVision 2 года назад

@@karlrosell3035 I work on a PC and use Stereo Photo Maker. If you are using an iPad you may want to try i3DSteroid (apps.apple.com/app/i3dsteroid/id467945370 )

@mchlnrvs Год назад

spent the afternoon trying to figure out a mac workaround. I'm at a loss unless I could somehow get wine bottler to run it but just updated to an m2 and there does not seem to be a wine or equivalent yet. have an old xp netbook but the opposite problem there with outdated software. stereo photo maker will not recognize the file and a few other apps do the conversion but are converting from a 2d to a 3d and at that point a cell camera would make more sense. any thoughts on getting ffmeg into stereo photo (64 silicon version)? I can run the updated ffmeg but as a terminal and not a command.

@mchlnrvs Год назад

works great running windows 11 w/ parallels! TY I am running an m2 macbook pro ventura if anyone else needs help with mac I can save you some hours

@ANAVision Год назад

Michael, how did you go with this? Have you managed to convert the videos. If you have a terminal with ffmpeg, you should still be able to execute the command. You many need to run each file separately as the for loop variable may not work in terminal. So use a command like this instead: ffmpeg -i "in.avi" -filter_complex "[0:0][0:2] hstack=inputs=2 [out]" -aspect 1.7777 -vcodec libx264 -x264opts frame-packing=3 -map [out] -map 0:1 "out_2x1.mp4"

@mchlnrvs Год назад

@@ANAVision no problem and thanks for responding. Works great

@RossAlford 10 месяцев назад

WIth exactly the sbove, copy pasted into a terminal window in OSX Catalina (I know, I''m way behind, it's bevcause another piece of software isn't compatible with anything more modern and I'm reluctant to upgrade and lose it), I get an error message that says "zsh: no matches found: [out]" If you have nay insight that would be fantastic, thanks!@@ANAVision

@ANAVision 10 месяцев назад

@@RossAlford try using this instead: ffmpeg -i "in.avi" -filter_complex "[0:0][0:2] hstack=inputs=2[out]" -aspect 1.7777 -vcodec libx264 -x264opts frame-packing=3 -map "[out]" -map 0:1 "out_2x1.mp4". This should prevent the shell from attempting to expand it as a glob pattern

@eyetechpixelstudios6841 2 года назад

Sir, after the software update of lumepad , the touch not working, now i am using with usb mouse, how to fix that problem

@ANAVision 2 года назад

Hmm, that sounds strange. I'm on latest update and not experiencing that. I suggest you contact Leia support on help@leiainc.com regarding this.

@katzunjammer Год назад

it didnt work, i got a message saying 'ffmpeg is not recognised as an internal or external command, operable program or batch file'

@ANAVision Год назад

are you on a PC or Mac? If on PC, ensure that ffmpeg is in your environment path variable, or execute in same directory in which you downloaded ffmpeg.

@katzunjammer Год назад

@@ANAVision i dont know what you mean when u say ffmpeg is in your environment path variable. I downloaded the videos to a folder from my SD card... should I have run the cmd commands from the SD card ?

@ANAVision Год назад

@@katzunjammer, I see there is an update to the ffmpeg install video I reference for 2023. Try this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IECI72XEox0.html

@cielaczek81 2 года назад

I dont have W3 but as soon as I saw this video I thought you could solve my problem. There is on market "Remon 3D Smartphone Stereoscopic Lens has a unique lens that can capture 3D image" you can see video uploaded by someone ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nSrsAPSF-L4.html. How to convert this video to normal SBS 3D format? Thank you in advance.

@ANAVision Год назад

@Cowboy, the video is already in SBS, but I suspect that you would want to view this in 3D mode on RU-vid. This video would need to be uploaded to RU-vid using the method I describe in my other video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MmDrnwPIWKg.html&lc=UgxEJxgDL2qP1lCPPvF4AaABAg. Also you may want to resize and crop the video to get rid of the round edges. That can be done using the editing technique in my video above.

@alanfbrookes9771 Месяц назад

When I paste For %f in (*.AVI) do ffmpeg -i "%f" -filter_complex "[0:0][0:2] hstack=inputs=2 [out]" -aspect 1.7777 -vcodec libx264 -x264opts frame-packing=3 -map [out] -map 0:1 "%~nf_2x1.mp4" into the command prompt I get the message "Windows cannot find 'For'. Make sure you've typed the name correctly and try again." What am I doing wrong? Can I put this into a batch file and run it?