I just did some “mama” sweatshirts at Christmas. Customer wanted a heart ❤️ appliqué with the names stitches on it with the small heart and applied to the sleeve. Turned out super cute! ❤
This is beautiful! So, classy and sweet. Thank you! I just bought me a Baby Lock Ellageo Plus BLL2. So, I am learning how to Embroider. But, I am finding myself being very particular, on what I like to do. I like more modern art work. So, this is right up my alley!
I did my first sleeve a couple months ago & nearly gave myself a coronary. 😆 I reverse hooped the sleeve on a fast frame. I swore off sleeves. Next time, I’ll try your method of putting the hoop on the machine first.
Hi Ashley! I am the one that was asking you to do a tutorial like this (on Instagram), so thank you so much! I did go ahead and do my sweatshirt earlier because it was a order and I hooped/floated it through the neck with my fast frames. It worked perfectly! I do have the 9x3 mighty hoop ordered. I’ll let you know how it works out. Thanks again, Sharon :)
I found the Mighty Hoops sleeve hoop to be a bit to large for stitching right at the cuff. I was concerned it was going to stretch the cuff to much or cause the machine to not stitch well because the fabric was a bit tight around the free arm. Definitely recommend fast frames for right at the cuff.
So cute! I think I would have tried reverse hooping on the sleeve. I’m also jealous of your Melco machine! I want the Bernina version but the cost is too high right now. Going with the brother 10 needle which I’m getting tomorrow!
Yes you can!!! It would be similar to how I monogrammed using the single needle! you stitch in the hole!! here is a tutorial video Lorrie did that will help you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-D2YwhTW1zYM.html
❤Will you please give us tips on preventing bunching on Jersey wear? Could it be pulling fabric too taught on frame? Or need of topper? Thank you friend! ❤
What did you add first for stabilizer? The no show poly mesh or the Sulky sticky self adhesive. And did you spray the No show poly mesh or the sticky self adhesive?
I was wondering about thread as well. What brand do you use? It’s always so pretty. Also, thank for telling the height and width of the design. Sometimes I find I make mine just a little too small.
I used the 6x10 Design! Sure!! I am trying to do more videos featuring all my embroidery machines (single needle, six and sixteen needles) !! So I can more people with each tutorial! Anything in particular you need a video on?
If you are using a single needle (flat machine) you would "stitch in a hole" meaning you find the spot you want to embroider, hoop it, then roll the edges in almost making like a birds nest where the center is the exact spot you want to stitch!!! Hope that makes sense!
Love this sweatshirt and the color is great. Very neutral. I also love your paper trays on the shelf behind you too. Can you tell me where you got them. Thank you in advance.
Thank you! they are from Amazon!! It looks like they stopped selling the pink ones I have which is a bummer!! Here is the link ..but it takes you to their gray ones now : amzn.to/3YxFEQL.
You would just add a stop (or Pause machine ) Lay down fabric, stitch the tack down stitch , stop and trim fabric, then do the final satin stitch outline! (I deleted the stops and appliqué tackdown to save time since I wasn't using fabric)
I am so frustrated. I follow your directions and use the same mighty hoop, but when I do the scanning, it doesn't center it. Is always more to the right even if I changed the position to the left. Still going to hit the hoop. I am so scared. Don't know how to figure it out. :(
Hmm !!! Don’t hit the frame!! Sometimes I take my items completely off and rehoop to make adjustments! Have you tried rehooping more to the left? Could you shrink the design? Find where you want to embroider ( place dot or sticker) and then you should be able to move the laser so the starting point is right where you want it! If your design is too big it may not let it trace and be getting stuck!! Hope this helps Marilene!
@@TheMonogramMompreneur Thank you respond to my comment. I did take off the machine, changed the size of the design but did not re-hoop. I will try that. Hopefully will work. I loved how yours come out sooo beautifully. Thank you so much.
