How to enter tapered ball nose bits into Vectric tool database - VCarve, Aspire, & Cut2D Quick Tip

Подписаться 17 тыс.

Просмотров 25 тыс.

50% 1

How to enter the correct settings for tapered ball nose bits into the Vectric tool database. These bits work perfect for cutting 3D designs. This lesson applies to Vectric VCarve, Aspire, and Cut2D.
Tapered ball nose bits mentioned(affiliate link):
shrsl.com/3pxfg
Vectric Master Training Course:
go.learnyourcnc.com/3LKeh06
Live Weekly Vectric Training:
go.learnyourcnc.com/live-trai...
My Bit & Supply Recommendations:
embed.kit.co/LearnYourCNC
Vectric Tips & Tricks Facebook Group:
/ vectrictipsandtricks
CNC Training Courses:
academy.learnyourcnc.com/
Find me online:
■ Website: www.learnyourcnc.com
■ Instagram: / learnyourcnc
■ Facebook: / learnyourcnc
■ RU-vid: / learnyourcnc
■ Blog: www.learnyourcnc.com/blog
#tipsandtricks #vectrictips #learnyourcnc

Хобби

Опубликовано:

26 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@LearnYourCNC Год назад

Want to become a PRO at Vectric software? Check out my Vectric Master Training Course >>> go.learnyourcnc.com/3LKeh06

@flypic1098 Год назад

What a fantastic and clear tutorial. No waffle. Just straight forward explanation of what is going on. I have subscribed. Thank you. I'm an ex CNC turner but new to routing & Vectric. Jim

@rickmccaskill7888 Год назад

Kyle, I have found that it helps to put a tool number, because if you output all the cuts in one file your CNC will see the tool number changed and stop to alert you to change the tool. Having them all the same it will not stop.

@fierceflyer5 Год назад

I’m glad you mentioned the file info not being correct. I found this out the hard way. Now if I download a file I always check that the info is correct. This was a very helpful video. Thanks

@wallystoolshed7050 4 месяца назад

I ran into your videos yesterday. I am glad a did. You are an excellent teacher. Kerp up the great work

@JimKlempel Год назад

This was an amazing video. So helpful and easy to follow step by step. This was just the bit I was adding so it worked out great. Thanks

@gregsanda9953 Год назад

Your videos have been a real help. Keep up the great work.

@RobSandstromDesigns Год назад

Good information Kyle and good suggestions on depth rate and naming tip

@flypic1098 Год назад

Thank you very much for that clear explanation. Your tutorials are fantastic. Thank you. Jim

@LearnYourCNC Год назад

Glad you like them!

@robertpfohler363 Год назад

Great info and very concise as always! Thanks

@LearnYourCNC Год назад

My pleasure!

@jackseiler5207 Год назад

Big Help! Thank you.

@dawnbigwarfe6871 Год назад

Excellent info thanks

@powerpc6037 Год назад

I've heard that you should set the plunge rate equal to the feedrate for tapered ballnoses doing finishing toolpaths because it will slow you down to the plunge rate anyways when you have lots of up/down movements while doing 3D models. I've set both my parameters to 2000mm/min (around 78ipm) for both those feeds and it works out ok, even on hardwood (only tried afromosia for now).

@james-kaygibson4437 Год назад

Good Info. Thanks.

@troypritchard2999 Год назад

Great information my friend..... Good explanation...... 👍

@LearnYourCNC Год назад

Glad it was helpful!

@elegantboyremon5915 Год назад

Love From Bangladesh... 🥰🥰

@n4cls1 Год назад

Is there a way to edit the Vectric Tool List outside of the Vcarve Software. I currently use Vcarve Pro 11.016 and would like to work outside the tool database and then import my tools?

@rgoldino Год назад

I downloaded the Amana tools database directly from the Amana website. Have you checked their tool database to see if it is any more accurate than the one from Toolstoday?

@martintvrdy3297 Год назад

Super !

@billwallace1057 Год назад

in your description of entering the angle of the taper, you used 6 deg. That would be the included angle. However the diaghram showing the tool in the database indicated the angle from the center line out which is half of the included angle....... now im confused a to which angle to plug into the d-base

@RobSandstromDesigns Год назад

Just rewatched the video. It was good the second time around too. I have noticed BROINWOOD and others are using TBN to do their inlays using a vcarve toolpath. I just watched a video where the creator indicated to be able to use a TBN for vCarving to do inlays required a person to enter the TBN as an Engraving bit. That was new information to me and I am not sure it is accurate because I believe I have selected my TBN 46280K in a vcarving toolpath and it worked as expected? Am I wrong - can I use a TBN in vCarve toolpath as a TBN or do I need to enter it as an engraving bit?

@LearnYourCNC Год назад

I just checked and you can use a TBN with a vcarving toolpath, so I would enter it as a TBN tool to reduce the possibility of errors.

@RobSandstromDesigns Год назад

@@LearnYourCNC thank you for checking - I thought this was the case.

@eitantal726 Год назад

11:45 why 1/32? I thought for a pass depth of one diameter, you don't need to slow down anything. Hence, should be 1/8", no?

@Heartbroken-di9fq 2 месяца назад

Sir this tutorial was a inches but I need a millimeters sir can you make add new tutorial for me in millimetres ❤ take love from Bangladesh

@Z-add Год назад

Why doesn't it require the length of endmill? Isn't that a useful parameter?

@LearnYourCNC Год назад

Good question, that is a useful parameter but Vectric software currently does not require it. They rely on you to determine whether or not your tool is long enough to complete the job. Most of the time it is just fine. But if you are making deep cuts, that is when you want to be cautious and double check everything. However, it would be ideal if Vectric adds that in as a parameter in the future to avoid collisions on deep carves.

@elegantboyremon5915 Год назад

(Failed to Open file) solution please 🥰🥰