How to fit a Knott detachable trailer brake cable

Подписаться 2,8 тыс.

Просмотров 58 тыс.

50% 1

How to fit a Knott detachable trailer brake cable
www.towingandt...
This video shows how to fit Detachable trailer brake cables.
It is similar way to fit Al-ko Detachable trailer brake cables.
When fitting brake cables it is good to check the condition of the brakes and re adjust the brakes.
See our other videos for help with this
Inspecting a Knott brake can be found at
• Inspecting and adjusti...
Adjusting Knott Trailer brakes can be found at
To buy Trailer brake cables please goto
www.towingandt...
we do stock a large range of Knott and Al-ko brakes that can be found at
www.towingandt...
We have many more videos on youtube to do with the repairs, maintenance of trailers and identifying trailer parts.
For more videos go to.
/ towingandtrailersltd
For any help and advice or parts please feel free to call us on 01909 473749
or visit our trade counter at
The workshop depot
Sandy lane
Worksop
Notts
S80 3EZ
Or visit our website @
www.towingandt...
We have a website with some other information on repairing and maintaining trailers @
www.uk-trailer-...
For the latest discount codes, notifications of new RU-vid videos and what is happening at towing and trailers please follow and like our facebook page
/ towingandtrailers
Hope this video helped please subscribe and like the video to help us get this information out and hopefully make the trailers on the roads safer.

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@Doublescoop1 7 месяцев назад

New to this Trailer system, THANK YOU! By showing you can change the brake cables without having to take the drum apart you have saved a man Hours! Love the video!

@TowingAndTrailersLtd 7 месяцев назад

Glad I could help!

@johnegan4056 5 лет назад

Great Videos thanks so much from a trailer newbie

@jembo1959 4 года назад

Another great video well explained Thanks.

@smashco 3 года назад

Thank you. I have a Brenderup horse trailer with AL-KO brakes, and I live in the U.S. I need all the info I can get, and your videos are fantastic.

@TowingAndTrailersLtd Год назад

Glad it was helpful!

@scottthomson700 5 лет назад

Brilliant Many thanks!

@robinjamieson-caley2421 5 лет назад

Thanks for the video as I am just in the process of overhauling my brakes. However I removed the ALKO handbrake spring cylinder to change the brake rods, but now I am unsure how it is locked in place and is there any gap between the nyloc nut and the cylinder. Any help would be greatly appreciated Thanks

@Festoolification 5 лет назад

Just swapped the pair on my trailer, just the info needed to do it easily apart from having to snip one of the old cables as the nuts were so rusted.

@TowingAndTrailersLtd 5 лет назад

Unfortuniatly when cables have got too bad there is no easy way of replacing a cable without cutting. We always use a grinder to cut cables. When the nuts are rusted you often need to cut with a grinder where they mount to the body. also it can be easier to cut the inner cable on the front near the compensator allowing a deep 6 point socket and a breaker bar to get to the nut holding the cable to the chassis. If they are stiff on the cover plates lubricate with penetration oil and cut the outer cable just behind the metal cup just at the start of the flexible cable this will release the cable if seized. Get a set of grips and hold the smaller diameter on the cup rotate the cup spinning it on the cover plates until it begins to move when it comes free you can then pull it off. leaving a small part of the inner cable connected to the brake expander. Sometimes the cup is so stuck to the cover plates that the cover plates fail when freeing them off. you would then need to replace the cover plates 1 needs welding to the back plate. Hope this helps