How To Fit Bosch Aerotwin Wiper Blades (HOOK FITTING) 

Do you like these blades? Are they any good? Let me know in the comment section.

I tried for 30 minutes on my own to install these damn wiper blades with no success. Next day I found your video, I went to the car to try again and I did it first try :)))) Thank you very much for the video, it was extremely helpful and well explained!

At last a simple no nonsense clear and straightforward tutorial

Just upgraded to these from the old style ugly metal body ones! To be fair my old wipers worked fine, they were just looking abit shabby as the body of the wipers were turning brown! So I decided to upgrade to the Bosch Aerotwins, they cost more than other brands, but I did my research and came to the conclusion that it’s worth spending a few £’s more on these. I haven’t tested them properly yet in the rain, as of course it was sunny and dry when I bought them today, but I used the windscreen washer a few times to check them, and was very impressed with how they clear the screen with zero marks/streaks/lines, just a perfect sweep, and you can’t hear them at all. It’s also made my car look more modern having flat wipers, which is a bonus👍🏻 Just hope this kind of performance holds up, and doesn’t start making noises after 6-12months. But apparently they don’t, so we’ll see. I think it’s definitely an overlooked part of a car, certainly with your average Joe driver anyway, they would probably just carry on using rubbish wipers until the MOT tester fails them, and then changes them with some cheap generic branded wipers(which is fine, but don’t last long, or start to rust like mine did)

Thank you. This is much clearer than the actual Bosch video.

A great help. Very clear and well explained. I struggled for ages before my wife suggested finding your video. No trouble after that.

This was extremely helpful, I appreciate it.

Excellent video. I watched it twice and within 5 minutes I had my wiper blades fitted and working. Thank you very much.

Thank you very much - I was stumped on opening the parcel. No instructions on how to open the fitting - I was terrified I would break something if I used too much force. I wasn't sure how to tackle it. Your video clearly showed where to squeeze to get it to open. A bit of a struggle for me to squeeze and lift but got it open in the end. Thank you so much for the clear information

Quality video! Can’t believe Halford fleece people £4 to fit them, when you can watch this and then do it yourself for free!

Thank you for sharing. Easy when you are shown by an expert.

Simple video and on point , no bill shit at all , great content mate

Excellent tutorial. So easy to follow. After watching the video a couple of times I had both blades fitted in no time. Thank you.

CarSpytv mannie....thank you so much...I am a complete numpty on stuff like this so very grateful for walking through the process...if ever in Aberdeen owe you a tattie scone or buttery or something....❤️

Thanks very much for your help! I couldn't even open the new one but then it was plain sailing after watching your video 😃

Very good, instructions clear and concise with just the right amount of humour. A pleasure to see your video.

Thank you. Made the job too easy.

Thank you! Used this to install AR22 & AR20 on a Toyota GT86!

Brilliant! Saved my 4 bucks fitting charge from halford😁

well done a simple answer and now its simple to do!!!

Excellent pace of information, nice and steady Well done. !!

I remember fiddling with this years ago and it taking far too long. But not this time 😉 Thanks for the video!

Looking for assistance to fit these blades on my F56 mini as no instructions on how to open the catch then came across this video and BINGO, job done. Thanks. 👍👍👍

Brilliant video. To the point, with clear instructions.

Excellent video. Thanks a million for showing so clearly and easily how to do this.

Great explanation, looks simple.... will get back to report when Feel brave enough to fit them. Bit cold out at the moment! .... lovely! Went like a dream! Thank You!

Easy. Thanks, did in seconds

Brilliant! Just what I needed to see - blades replaced quickly thanks to your help!

Good clear instructions, had no problems following them . Blades are excellent

Just used your video to change my blades! Thank you so much

Excellent instructions. Thanks 👍

Merci beaucoup. Votre tutoriel m'a bien aidé.

Awesome video!! It was super easy to follow. I just replaced the wipers effortlessly. Thank you so much!

Thanks! Very unintuitive design from Bosch, your video was the only one that explained in detail.

What a simple technique 👌

Extremely useful video delivered in a very friendly and amusing way! Thanks.

Thank you! Really useful. I had already changed the wiper blades before I found this video. It would have been much faster and less tricky😅 It was a cheaper supermarket copy of this product, but the principle was exactly the same.

Awesome video man! Just replaced my wipers so easily because of you! 🤝

You save my life thanks

Concise and perfect for my needs - many thanks!

Brilliant again hard work fixing the old transit

helpful video .thanks. looked fairly simple but so much easier now seeing the vid and i'm shoving it into the correct end of the pivoting bridge. initially tried the bit the stuck up..and it just didn't close. these things can be delicate so you never like to force them if you're not 100% sure, you're doing it right.

Thank you! You made it so easy for me. Taking the old wipers off was the worst part I must say.

Very helpful thank you, shows me that I'm not being stupid and I've had the wrong model sent out to me (again).

Thank you! Your explanation was succinct yet still incorporated relevant details with clear visual examples that made it a breeze to do battle with the ever popular wiper-change-during-winter. Much obliged. 😊👍Happy New Year!

Thank you so much. It helped me today to do it.

Thanks for this very useful video!

I was about to give up, as the shape of the wiper hook in my Toyota (a kind of flattened zig-zag) makes it impossible to put it through the hole and around the pivoting bridge. I needed to remove the locking catch (max. open and pull carefully but firmly), put the hook through the hole of the catch first, attach the hook to the wiper blade as you show in the video, and then lock the catch back in its place on the blade and close to lock the blade. Thanks for the video!

Great advice for wiper fitting.😢🎉

Very good thank you and just in time before more bad weatherr. Good luck with the brolly!

You sir are an absolute Legend 👑 thank you!

you just saved my sanity, thank you!

Perfect. Thank you!😃

Thanks very much for the footage my friend, much appreciated 😁👊👌done

GREAT JOB WELL EXPLAINED

Fantastic, just what I needed, have liked and subscribed..!!

Excellent! Thank you Sir! This video helped me a lot. 👍👍

Very clear and helpful. Thank you

Thank you! Remarkably difficult to find out how to raise that clip on the new Aerotwin (as you say here, by pushing in on both sides first!)

got me out of a bind. thanks.

Thank you for this video.

Champion, thanks mate.

A very helpful little video. Many thanks.

Perfect! I was looking for a video like this, simple, exact. 👍🏼👍🏼👍🏼👍🏼

thanks a million mate.All those fittings coming with blade had me confused.

Thanks for explaining clearly

Simple and extremely helpful. Best vedio

It works a treat. Thx

Thank you I was starting to panic, had removed old one but struggling to even open new one. Also let me know about setting wipers as per my manual.

Thanks saved me time messing around

You sir are a life saver, this was very helpful. Thank you!

Thanks for your help 😊

Thank soo much this helps me a lot

You video is good except for (like all the other instruction videos) next to show the bit between opening the cap to remove the wiper and fitting the new one in the hook. How do you remove the old wiper, it doesn't seem to just slide off. Which way do you slide the old one off?

You the Man 👨 Thank You

Thank you for this very useful video!

to the point, good humour. Top marks sir

Thanks a lot, very easy to do now I know how.

Man you are funny and insightful

Thanks for the video

Extremely helpful video 👍

Funny and great video 👌🏾

Very helpful; thank you!

I bought the multiclip ones thinking one of the clips for sure will fit my hook-style wipers. Turns out multiclip fits all EXCEPT this one, and you have to buy separate model for hook mounts. Eh... At least now I know how to install these when I buy them.

Love it ! Thanks

Many thanks!

Awesome, Thanks!!!

Thank you!

great video thanks

Very helpful

Very helpful , thank y

Thank for you help!

Thanks, very helpful.

Easy as pie once you know how the mechanism opens. Too tempting to stick a small flathead screw driver in it, like the older wiper style and brake the plastic. Because of the cost, very few folks now change just the new rubber wiper, unless you have a classic car that had chrome or stainless arms. The old rubber replacement only method was usually a waste of time as the wiper would slip in the old holder and also the bright metal caused glare on a sunny day. I do like the look of these Aerotwin and similar brands. It seems they would have a better squeegee effect? They are supposed to last much longer, too. We shall see.

Very useful and good learningatyle. Thx

Thank you

Thanks 😊

Very informative video this! Thanks alot mate :)

This video also works for Halfords 65 set

Thanks