How To Fix A Clogged Windshield Washer Spray Nozzle-Easy Tutorial 

I can't thank u enough for ur short and sweet video! It literally just saved my life while travelling the snowy, slushy and muddy roads in Colorado alone. Stopped at a Valero right past Red Rocks, and watched ur video. I didnt have a paper clip on me, but the cashier was nice enough to give me TWO! Didn't think mine was going to work as they looked corroded (2006 Kia Sorrento) But it did, and I can't thank u enough! This girl loves to be able to fix things on her own, so I wasn't the damsel in distress I thought I was going to be. Much Love from Snowy Colorado!!💜🌻💜

I have simply partially filled my reservoir with vinegar. Then ran it periodically. The acid ate the clog and the system returned to normal after several days. Good if you have some flow and time to let it do it's thing

This worked for me today. Thank you!!!!

Very informative to a point I was really hoping you were going to take it apart and show us how to get the jet out of there but you didn't and that's okay but the wind is making a difficult to hear and understand you but again I do greatly appreciate the video have a nice day

How do you remove the plastic housing in order to access the nozzles and the tubing?!?

Trying today. Will keep you posted sir.

Hope it’ll work; going to try it tomorrow. Excellent video!

Wish you had shown how to remove the cowl covering the access to the hose connection. That is what I need to see. I am sure I will break some connector if I don't know how to do it correctly. Pin cleaning didn't work. So no spray/water on driver side at all, so I think the hose has come off that sprayhead.

I gave my nozzles at light shot of compressed air each way and it works like new

Paper clip, no joy. Can of compressed computer air, no joy. Rinse and repeat, no joy, but now I have a dribble on the nozzel that isn't working. I had replaced the windshield cowl, the mesh dingus under the windshield. There was a Y fitting, and everything was fine before I replaced the cowl, so the replacement cowl, found at a junkyard, had a clog from that fitting to the nozzle. After mutiple failures, but I HAD A DRIBBLE, I realized I had a way to get vinegar to the nozzle. At first, no joy. Repeat, it worked. Repeat again, it was spraying just as strong as the other nozzle. Be patient, it took years, if not decades, for the nozzle to clog. It could take a few days for the vinegar to do its job. Me? Less than an hour. PS: I washed off the vinegar after each try to preserve the paint and trim.

Thanks. Problem now solved

Thank you for your help !!! I think this video in laymen's terms helped a bunch .

Pretty straight forward. Didn't mention blowing air into the washer nozzle to push an obstruction back through the line and, hopefully, into the reservoir where it came from. Something that doesn't work?

My problem is, I can't even see the nozzle hole where the water should be coming out to hit the window. It's like that whole area has some kind of rubber plug right over it that I can't seem to move. Water does come out but it's not really going where I want it to go or it just seems to piddle out and flood around the nozzle area. Toyota Wish

If you soak it in anything, soak it in vinegar. Water is a waste of time.

i was 700th like

If a paper clip is to large to go into the sprayer hole, use a sewing needle. Rotate the needle to help break apart the debris stuck inside.

Thanks bro😀

Thx.

I just used a spray can and picked the hole with needle still nothing comes out

Unfortunately, this did not fix my problem, it actually made it worse.

Wind sound!!. You could have recorded a voiceover

That wind noise sux!!

So 75K people sat through the windy ass noise? wtf dude

Thanks. Now how about that manicure.