How to Fix a Dishwasher NOT DRYING Dishes | DIY

Подписаться 22 тыс.

Просмотров 75 тыс.

50% 1

How to Fix a Dishwasher NOT DRYING Dishes | DIY - ►Dishwasher Heating Element amzn.to/4dvqEdP 🔥 🔥🔥
🔨 PRODUCTS IN THIS VIDEO 🔨
►Dishwasher Heating Element amzn.to/4dvqEdP 🔥 🔥🔥
►Dishwasher Rinse Aid amzn.to/3X2Lcn0 💦 💦💦
Keep Learning ► diywarriorhouse...
#diy #howto #dishwasher
Description: In this dishwasher will not dry dishes youtube video I'll show you how to inspect, diagnose & repair a dishwasher that is not cleaning, not heating or not drying properly, while I fix a whirlpool dishwasher not drying. During this process you will also learn simple process of how to remove and install a dishwasher to work on or replace your dishwasher.
🎦 Subscribe NOW and hit the bell 🔔 to get notified for FREE videos - diywarriorhouse...
🔨DIYer Essential Tools for Home Repair/Maintenance🔨
amzn.to/3XercPB
🔨Warrior House Shop Essentials🔨
amzn.to/3AsoWeo
🆘 DIY Survival - Bug Out Bag (BOB) list ✅
Tactical Backpack amzn.to/3XemMrY
Sawyer Filters amzn.to/3HoVy8Z
Katadyn Hiker Pro Filter amzn.to/3SXR1AQ
Camp stove with pot amzn.to/3T0hVId (fuel sold separately)
Camp Mess Kit with silverware amzn.to/46UziA2
Solar kit amzn.to/3SUTY52
Rechargeable Batteries amzn.to/3YVgwXc
Mossy Oak Multi-Tool w/ fire starter amzn.to/3yEz3fQ
Emergency 2 Person Bivy amzn.to/3yCVySp
Hand Warmers amzn.to/3YVel66
Waterproof Storage Box amzn.to/3AwfoiC
Field First Aid Kit amzn.to/4dy29fN
Travel Medicine Kit amzn.to/4cGrinf
Family Bandage Pack amzn.to/4dSxZDP
Anti Bacterial Bandages amzn.to/3yDWA0r
72 Hours Emergency Food Kit amzn.to/3XclMEs
Iodine Tablets for Radiological Emergency amzn.to/4dUpats
FOLLOW US ON SOCIAL MEDIA:
#INSTAGRAM 👉🏼 Coming Soon
#FACEBOOK 👉🏼 www.facebook.c...
#WEBSITE 👉🏼 www.warrior.house
Disclaimer:
Videos produced by Warrior House DIY are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here may be used to breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Warrior House DIY does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility for what you do with the information provided by this site. Viewers must be aware, by doing projects on their homes they are doing it at their own risk and Warrior House DIY cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said, Warrior House DIY cannot claim liability with all applicable laws, rules, codes and regulations for a project. It is the mission of Warrior House DIY to Empower You With Skills For Life, it is the viewers mission to Be safe, have fun and ALWAYS stay informed with your local building codes.
Warrior House DIY is not paid marketing. As an Amazon Associate, we may earn commission on qualified purchases. You can help our channel to continue providing quality free content by sharing and subscribing. #subscribe #commissionsearned
Thank you from Warrior House!!
#woodworking #broken #gardening #towergarden #savemoney #lifehacks #oddlysatisfying #5minutecrafts #asmr

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 113

@WarriorHouseDIY Год назад

If you liked the video consider hitting those like and subscribe buttons! If you found this helpful or have any questions feel free to shoot your comments here!

@Dragon_Wise 5 месяцев назад

I subscribed. Thank you again! If you ever need help with swimming pools, let me know. I have 20 years experience: building, maintenance, Reno’s, etc…

@WarriorHouseDIY 5 месяцев назад

Thank you!! If you ever want to share a video of diy pool maintenance or something like that please email me. I’d be happy to collaborate with you. Jr@warrior.house thanks again for sharing 🙏

@doctor567 6 дней назад

Thumbs up for including the importance and description of running the test cycle after repairing it

@WarriorHouseDIY 6 дней назад

Thank you 🙏 and thanks for commenting

@mech100 2 месяца назад

I just stumbled upon this video . I've got to say there is more info in this vid than than all others combined . Very direct and to the point. The one point that others are lacking is the reset/diagnostic test cycle that was explained. I would put this at the top of things to try because it does not require any tools or dismantling or removing anything. I live in Texas near the Houston area. We experience a lot of power outages which I think is what caused my heater to no longer work. After running the reset/diagnostics the heat was back to working. Don't know what I would have done without vid info. All components would have checked OK. Cycling would have shown that heater was not receiving 120v. I would have guessed that circuit board was faulty. Saved me a headache.😉

@WarriorHouseDIY 2 месяца назад

Man! This is exactly why I started this channel. Thank you for the feedback and I’m so glad it helped you. 😎

@iamco698 6 месяцев назад

Thank you so much. I followed your video step by step and was able to swapped the old one out and replaced it with a brand new heating coil. It was quick and simple. And it saved me several hundred dollars :)

@WarriorHouseDIY 6 месяцев назад

It’s so good to hear feedback like this!! I’m glad you got it fixed! Thank you for watching and sharing your experience

@brentwelty1999 9 месяцев назад

Awesome information! Better than any other I've found! Thank you!

@WarriorHouseDIY 9 месяцев назад

Grateful for your feedback! Thanks for watching and commenting

@juliedeane9541 3 месяца назад

Wow this was amazing!! I think I will be able to fix my mom’s dishwasher and not have to call my brother, bil, or nephew. Thank you so much

@WarriorHouseDIY 3 месяца назад

It really isn’t all that difficult. You got this!!

@MerouaneALG 6 месяцев назад

Thank you for your guidance on this project, easy to follow, instructional, and made me look like a hero!

@WarriorHouseDIY 6 месяцев назад

😎 you are a hero! Thats the best to hear:) and thank you for sharing!!

@SUKHJEETSIDHU-h8w 9 месяцев назад

Thank you for guidance for rest the machine after replacing heating element

@WarriorHouseDIY 9 месяцев назад

My pleasure. Hope it helps.

@montanamom1124 9 месяцев назад

Had to refer back to the resetting instructions. Thank you again

@WarriorHouseDIY 9 месяцев назад

So grateful this was helpful 😎

@Dragon_Wise 5 месяцев назад

Thank you!!! You saved me hundreds of dollars. Very informative!

@WarriorHouseDIY 5 месяцев назад

Thank you!! I’m glad my video helped and thanks for commenting also 🙏

@brittneyharper8169 Месяц назад

Very informative video! Thank you! A few months ago we replaced the heating coil and the dishwasher still does not dry the dishes. Everything comes out dripping and after a few weeks mold builds up in the inside of the dishwasher. I had never seen or heard of the panel reset until your video, did that and it still doesnt work. Any ideas on what could be the issue? It is the same model as the one in your video.

@WarriorHouseDIY Месяц назад

I’m sorry things still aren’t working. I’m guessing you’ve filled and keep the rinse aid filled?

@Coldpack13 11 месяцев назад

I was too lazy to pull out the dishwasher. Put my old, wrinkly, skinny, no muscle tone arms underneath the tub and changed it out in 15 minutes. Thanks for the tip on the filter. Ours was moldy and full of fats, oil, and grease.

@WarriorHouseDIY 11 месяцев назад

Great job!! This can definitely be done from underneath in most cases. Thanks for sharing

@lt7378 10 месяцев назад

😂 on the arm description . We seniors hear you .

@WarriorHouseDIY 10 месяцев назад

When it works , it works 😂

@JamieLogan 10 месяцев назад

@@WarriorHouseDIYwas

@curiosity2314 Год назад

Good job but yeah if you can afford a better dishwasher I would certainty replace that one. Those float switch assemblies are prone to leaking. Your advice is good overall.

@WarriorHouseDIY Год назад

Thank you for replying and agreed. In the event that a new dishwasher is not affordable, hopefully this helps.

@MagdiNonDuality 9 месяцев назад

Thanks. Great job. Very helpful

@WarriorHouseDIY 9 месяцев назад

Thank you for watching and for the feedback

@devildog1393 2 месяца назад

So my dishwasher door vent seems to be all clogged up and im nor too sure how to get it apart for the amana adb1400agb0. Looks super similar to your model. Any advice?

@WarriorHouseDIY 2 месяца назад

The screws around the inside of the door panel are the best way to access the door components. Hope this helps. Thanks for commenting.

@kevinsampson3815 8 месяцев назад

Great video, thanks

@WarriorHouseDIY 8 месяцев назад

Thank you and thanks for commenting 🙏

@montanamom1124 11 месяцев назад

Very good video

@ronnieremmymukwaya7961 Год назад

Am longing to be skilled like you Mr.Jr ! May God allow me meet you physically

@WarriorHouseDIY Год назад

Thank for you Ronnie! Keep up the great efforts!!

@wandahill1619 7 месяцев назад

The rinse aid was my issue, so does that mean I have to refill it with every wash or does it get to a certain "low" point? I could still see blue (the color of my rinse aid) through the window, but it wasn't drying. Mine is a new dishwasher also.

@WarriorHouseDIY 7 месяцев назад

That’s actually a good problem (kind of annoying but not something major). You just need to keep it full when you see the level is empty. There should be a clear sight glass showing the level.

@Xaniker 2 месяца назад

Didn't finish video because I need to get to bed. Ive been in appliances repair for 15 years. Lot's of bad heating elements I've seen! Not sure if he'll mention this but occasionally putting in a new element will short out the control board. It'll happen.

@WarriorHouseDIY 2 месяца назад

Shouldn’t happen with the unit de-energized but good to be cautious. I cover the board reset at the end also. Thank you for sharing

@pyrokamileon 6 месяцев назад

I have been starting any screw by reverse threading a couple turns just to make sure everything's lined up properly and I can't tell you how many times I've had somebody with me and they look at me like I am mentally challenged. I take a moment to explain to them why I do that and on the one hand I really don't care whether they approve or not because I think it is worth doing things properly but I have to say it is a little soul crushing every time I get look of fear when they think I don't know how a screw works.. 😠

@WarriorHouseDIY 6 месяцев назад

Can’t teach everyone 🤷‍♂️thanks for sharing a valuable lesson

@marcusnguyen6755 5 месяцев назад

mine when it's done with the load , the sanitize light stays blinking while the clean light stays solid . so that means I gotta replace the same heating coil too?

@WarriorHouseDIY 5 месяцев назад

No need to replace the coil of the dishes are hot and dry. That sounds like a different problem. I’ll look into it. Thanks for commenting.

@TechCrazy 7 дней назад

How do you read the error codes from that reset or other procedure?

@WarriorHouseDIY 7 дней назад

Some models the lights will indicate a code. It’s best to do a search for a technical manual by model number. Hope this helps. Sorry for the delay as we just got cell service back a little after the storm. Thanks again for commenting.

@TechCrazy 4 дня назад

@@WarriorHouseDIY I did and AI search for it and this is what it gave me. Interpret the Flashing Lights: Count the Flashes: The lights may flash a certain number of times, pause, and then flash again. The first set of flashes represents the “F” code, and the second set represents the “E” code. For example, 2 flashes ➔ pause ➔ 1 flash indicates error code F2E1. Consult the Error Code Chart: Refer to your user manual or a Whirlpool service manual to interpret the error codes. Common error codes and their meanings include: F1E1: Electronic control malfunction F2E1: Keypad or user interface error F3E1: Water heating system issue F5E1: Door switch problem

@WarriorHouseDIY 4 дня назад

That’s really helpful information to have. Thank you for posting here.

@Fullrusher 7 месяцев назад

My blew the curit breaker one day and it has water pooling in it and wint turn on ... Any clue what could be wrong ? Ima check everything but want to have a start point

@WarriorHouseDIY 7 месяцев назад

Might be a bad flood switch (that can prevent the tub from draining) also could have something blocking the drain line and the pump is working too hard causing the breaker to trip. Good luck and let me know how it goes.

@colinmadden339 Месяц назад

@warriorhousediy I replaced it and ran a cycle and no luck. Have any other ideas about how to fix this?

@WarriorHouseDIY Месяц назад

And you did a reset and filled rinse aid?

@colinmadden339 Месяц назад

@@WarriorHouseDIY Yes. The old element cracked in half when I removed it so I still think that was the culprit. Could that have blown a fuse?

@colinmadden339 Месяц назад

Hold on , I am an idiot, didn't reset let me try that.

@WarriorHouseDIY Месяц назад

Same thing for the one in this video. And it wouldn’t heat till the reset was done. Let me know how it goes 😎

@LanaMartin-t2n Год назад

How important are the plastic bolts ? Mine won’t fit one side

@WarriorHouseDIY Год назад

If referring to the plastic nuts for the heat coil, they should be a direct replacement or you can possibly reuse the old ones. But they are important because they provide the waterproof seal where the heat coil enters the plastic tub. Thanks for asking!!

@VictorManuelRivera-i6k 6 месяцев назад

I got that same model..how to do you take off that air vent cover..Can't find how to anywhere

@WarriorHouseDIY 6 месяцев назад

Do you mean the steam vent in the door panel? I haven’t worked on that but most require the door panel to be disassembled (screws all the way around it)

@VictorManuelRivera-i6k 6 месяцев назад

Yes..I've seen other models can just twist and open it

@WarriorHouseDIY 6 месяцев назад

@user-sh2zy2rb8f for sure. This one doesn’t seem to want to pop off easily 🤷‍♂️

@brandonswyhart1219 4 месяца назад

I changed the heating coil and it still doesn’t heat dry or high temp. Any recommendations?

@WarriorHouseDIY 4 месяца назад

Did you try a panel reset? I cover it briefly at the end of the video. Also the rinse aid needs ti be full in some units. My guess is the panel reset would do it. Thanks for commenting and let me know how it goes.

@libjib 3 месяца назад

After the unit runs its diagnostics wash, how do you know if it found something off?

@christienixleab7800 2 месяца назад

I just replaced my heating coil. My issue didn't really start until I used a rinse aid. I can't figure out why it's not drying the dishes

@WarriorHouseDIY 2 месяца назад

Is it still not working after heat oil replacement? Assuming you reset the control panel also?

@hanlievisagie7480 2 месяца назад

@@WarriorHouseDIYhow do you reset defy⁉️

@WarriorHouseDIY 2 месяца назад

I cover it at the end of the video, a hard reset. I powered off a unit to reset and still had to do a hard reset for it work.

@TimothyHudson-z7u 2 месяца назад

Just replaced my old Whirlpool dishwasher and the new Whirlpool dishwasher in no way dries the contents like the old one... I'd put the old one back if it wasn't leaking water.... thinking about contacting Whirlpool to come and get it

@WarriorHouseDIY 2 месяца назад

I agree with old vs new in some cases. Did you find the cause of the leak? Door seals are a likely culprit and very easy to replace. Thanks for sharing.

@mydailywtw 6 месяцев назад

What if its still not heating after replacing the heating element and doing the reset?

@WarriorHouseDIY 6 месяцев назад

I would recommend checking easy things like the rinse aid and then working through a service technician manual (typically available online by searching service manual and your model number) Depending on your unit there may be a fuse or some other physical reset requirement. But start with the easy stuff like the rinse aid, it gets so many of us. Thanks for sharing and let me know how it goes.

@montanamom1124 11 месяцев назад

Who knew rinse aid was so crucial?!

@montanamom1124 11 месяцев назад

My EXACT WASHER THANK YOU

@WarriorHouseDIY 11 месяцев назад

I hope this helps you :) thanks for watching:)

@SkanMLL 6 месяцев назад

I replaced my heating coil but missed the step of disconnecting the wires, which, totally my fault, and now it seems like the coil doesn't heat up even a little bit, any idea what I could have fried? @WarriorHouseDIY

@WarriorHouseDIY 6 месяцев назад

If you mean you didn’t disconnect the power wires and also didn’t turn off the circuit breaker then first I would turn off the breaker for about 10 minutes and then re-energize the unit. If that doesn’t work, did you perform the panel reset (end of the video)? Let me know how it goes.

@SkanMLL 6 месяцев назад

Thank you for the response on this. I simply unplugged the dishwasher from the wall rather than flipping the circuit breaker, and what I didnt do was the part with undoing the wires. I've tried to reset this dishwasher multiple times but it doesn't seem to want to go into a hard reset mode. I have a Kitchenaid KDFE204EWH3.. I cant find ANYTHING online about how to reset this specific model, everything I see is just generic kitchenaide dishwashers and says to rotate between pressing hightemp wash and heat dry 5x.. I've tried this probably 10x and it doesnt do anything.

@SkanMLL 6 месяцев назад

finally just called them and there is no code to reset this dishwasher, its literally just remove from power for 30 minutes.. I guess I'll see how that goes@@WarriorHouseDIY

@WarriorHouseDIY 6 месяцев назад

Ok a long power cycle might do it. I’ll look into codes and programming after this job today.

@SkanMLL 6 месяцев назад

I greatly appreciate it.. I also had tried putting the old coil back in there just to see if the new coil was bad, and it also wasn't heating at all... so really hoping the hard reset does it.@@WarriorHouseDIY

@srt4cuz Год назад

I'm more impressed with the screw driver..I have the same one and never knew it was a nut driver also..smh

@WarriorHouseDIY Год назад

Yeah that's a great tool! We even keep one in the junk drawer. Thanks for watching and commenting!!

@brinnon9073 15 дней назад

hardest part of working on any dishwasher is getting it in and out of the hole!!!

@WarriorHouseDIY 15 дней назад

Definitely can be challenging depending on flooring and other factors. One tip is to try and raise the front leveler feet so it’s a little shorter in height to slide out. Thanks for commenting.

@benjaminchandler7065 7 месяцев назад

I changed the heating element still won't heat what is next?

@WarriorHouseDIY 7 месяцев назад

Did you try the circuit board reset that I talked about towards the end of the video? Most need that rest.

@benjaminchandler7065 7 месяцев назад

I can't believe I missed that! That did it Thank you so much!

@WarriorHouseDIY 7 месяцев назад

@benjaminchandler7065 Awesome!!! Way to go 😎

@DefMusic79 11 месяцев назад

So, i call BS on the rinse aid about it telling it "not to dry - heat up" I'm now on my 2nd dishwasher, same issues. I'm saying what you claim is BS because I didn't use the R.A and everything is HOT.

@WarriorHouseDIY 11 месяцев назад

It’s definitely not all units. I haven’t made a list of ones that need it but I always check the model numbers when there’s a problem heating. Thanks for sharing.

@DefMusic79 11 месяцев назад

@@WarriorHouseDIY huh?

@WarriorHouseDIY 11 месяцев назад

The rinse aid component may not be a factor with your models.

@DefMusic79 11 месяцев назад

@@WarriorHouseDIY apparently nothing is. I don't understand it and you had the "fix" ಠಿ_ಠ

@WarriorHouseDIY 10 месяцев назад

What can I explain better for you?