How to Fix a Hole in a Plastic Bumper - Fast, Easy, Durable

Подписаться 84 тыс.

Просмотров 33 тыс.

50% 1

Shows different ways to fix holes in plastic bumpers. Tools, materials and Lakeside merch listed below:
🔥 5" Sander - Astro Pneumatic 222S high speed sander
🔥 Grinding Discs for 5" Sander - 40 grit fiber resin disc - 24-40 is good for grinding or roughing up metal and other materials
🔥 DA - National Detroit - newer models of ND are designed very similar and use very little air
🔥 Filler - Ocean Flexible Bumper Filler
🔥 Mixing Board - brothersdesignsmi.com/shop-al... - back side is being used in video
🔥 Metal Spreaders - Coster 4" Steel Auto Body Spreaders - www.amazon.com/Coster-Steel-A...
🔥 5 Inch Sanding Block - (Example) www.harborfreight.com/4-78-in...
🔥 2nd DA - (Cheap but works great!) - www.amazon.com/Random-Orbital...
🔥 Adhesion Promoter - Bulldog Adhesion Promoter
🔥 Epoxy Primer - Auto Body Master epoxy primer
🔥 Urethane Primer Surfacer - Auto Body Master urethane primer surfacer
🔥 Respirator - 3M 6300 Half Facepiece Respirator W/ 3M 2097 P1OO Filter Cartridge

Авто/Мото

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@mikesantimore6971 Год назад

It's really nice watching a true Craftsman

@LakesideAutobody Год назад

Thanks for the kind words Mike - have a good weekend 😊

@curtismuma1931 Год назад

I like the metal backing, the best. Both good. Nice job !!!

@gm-lb9oe Год назад

Great video Jerry, have a great weekend

@vicshonebethel9934 Год назад

Beautiful work Jerry 👍

@pstreetgarage7304 Год назад

Excellent video. I like the metal bracket method. Also. It's good to know that regular filler can hold up on those plastics. I imagine the flex stuff is alot more expensive

@UndergroundPaintKing Год назад

Another great easy to follow video Jerry!

@LakesideAutobody Год назад

Thanks 👍

@J_R_Shop Год назад

Thank you Jerry, great information!😊

@LakesideAutobody Год назад

Thanks JRS - hope everything is going good for you my friend - have a good weekend 🛠😊

@BruceLyeg Год назад

Nicely done

@308hit Год назад

Ha... You make everything look so easy awesome video!!!👍👍

@LakesideAutobody Год назад

Thanks 308 - I appreciate your support my friend :)

@randydillman4698 Год назад

Nice video Jerry. Like seeing different ways. I used black plastic tie wraps and a soldering iron to fix cracks from the rear before mounting it. Next time I will do the finish work on the car and paint it like you did after it is installed. Have a good weekend! Randy

@LakesideAutobody Год назад

Thanks for watching Randy - you have a good weekend too my friend 😊

@baggiesfan1000 8 месяцев назад

Super video. Given me exactly what I need to start repair, thank you

@LakesideAutobody 8 месяцев назад

You're welcome BF1000 - Happy TG :)

@bradstaffotd4715 Год назад

Great video nice job looks good

@LakesideAutobody Год назад

Thanks 👍

@davidbondy4359 Год назад

great job jerry you are the best. god bless my friend.

@LakesideAutobody Год назад

God bless you to my friend - thanks for watching and the kind words :)

@gergemall Год назад

Thank you Jerry

@frankm8533 Год назад

Nice job 👏

@LakesideAutobody Год назад

Thanks 😁

@dangerdavefreestyle Год назад

It may sound crazy but I have fixed cracked motorcycle plastic body panels and even a cracked chainsaw airbox by carving a vnotch into it, sanding the area to rough it up, heat it up with a heatgun so its warm, clean it with brake cleaner, and dripped a flaming zip tie into the crevice, dabbing it at times like im laying a welding bead and that shit works like a champion!

@45AMT Год назад

Jerry's a heck of a body guy!

@LakesideAutobody Год назад

Thanks RR - I appreciate your kind words - have a good weekend :)

@tracycolorado Год назад

Thanks

@hobbyautobodyfun9315 Год назад

Nice 👍

@LakesideAutobody Год назад

Thanks ✌

@MrTheHillfolk Год назад

Ooh ,I got so lucky with 2 license plate holes in my plastic front bumper. They used self tappers, and I was able to pick and fish it all out of the hole,it's probably 95% unnoticeable. People , Velcro holds plates on, no need for holes, I've been using it 20+yrs for front plates.

@LakesideAutobody Год назад

Good idea MrHillfolk - I'll give it a try some time :)

@JO-rh7io Год назад

How long do you wait to lay down the epoxy primer after shooting the bulldog?

@billsmith9937 Год назад

Interesting, that filler caught my eye! Never have I seen or heard of it. Is it possible you could share with me how I maybe purchase a can? Seems like it gets hard and sicks and doesn't ball up when sanding. NICE!

@LakesideAutobody Год назад

www.ebay.com/itm/313973951816 It sands pretty much like regular filler and feathers into the plastic w/o an issue.

@dwaynelejeune3508 Год назад

Luv the way you showed two methods of repair! Question I know you get this all the time; what brand and model spray gun would you recommend for a diy beginner Looking for something to spray sealer,primer,and paint. I want mind to much getting a “kit” few guns but budget wise keep cost under 400$ Keep up the great vids

@LakesideAutobody Год назад

You can lose with this gun - cheap and it works fine. www.harborfreight.com/air-tools-compressors/air-spray-guns/20-oz-hvlp-gravity-feed-air-spray-gun-62300.html If you are looking for a conventional gun which is great to learn on - this one works well and is not that much $ - www.amazon.com/Astro-4008-Spray-Handle-Nozzle/dp/B000MQ9BU2 I like Campbell Hausfeld guns from say Home Depot too cheap but good quality - www.amazon.com/General-Purpose-Campbell-Hausfeld-DH580000AV/dp/B0049FNOWS/ref=asc_df_B0049FNOWS/?tag=hyprod-

@autovive4605 Год назад

Sir show us your compressor moisture seperator system

@LakesideAutobody Год назад

Right now I only use this - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-blE9tKKPI20.html I'm testing it for a company and it works really well so far. This is how I usually separate the water for painting though - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CSGAgAyeInA.html Obviously, you'd need something a lot more advanced with a large compressor and various people working off of it - like in a dealership or large body shop :) These methods will work fine for 1 person though 👍

@Mattax355 Год назад

Plastic welding the hole and then refinishing it would be much faster and just as sturdy of a repair

@brianwitton5061 11 месяцев назад

Hi Jerry,I have a small hole in my bumper I’ve got the filler ,what’s the best primer to use on the filler before painting.thanks.

@LakesideAutobody 11 месяцев назад

They do make primer especially for urethane bumpers (SEM Flexible Primer Surfacer Quart Can 39134) but you really can use any automotive grade primer such as lacquer primer surfacer, urethane primer surfacer, etc. You can use epoxy primer too but it doesn't sand very easily or build thickness for block sanding your body work.

@Gigachadly Год назад

Hey man if I use the Fiberglas cloth technique to patch a rust spot can I use normal bondo body filler on it or does it HAVE to be bondo glass?

@LakesideAutobody Год назад

You can absolutely use regular filler :)

@SamToshi Год назад

Any specific reason you apply the epoxy primer before urethane primer surfacer?

@LakesideAutobody Год назад

Epoxy primer sticks to plastic better than the urethane primer surfacer. You can get DTM direct to metal Urethane Primer and skip the epoxy but with plastic it's good to use the epoxy or even a primer made specifically for plastic bumpers like this stuff but it's a bit expensive. There's a lot of ways that work. Just find one you like and stick with it :)

@designsinorbit Год назад

I might just know something you don't. That would be something,eh? ;) The grinding discs are sharpening your scissors! That's how I sharpen any scissors...by cutting sand paper. :)

@LakesideAutobody Год назад

Interesting... You know... I've been cutting discs with that same pair for years and they are always fairly sharp - you might be on to something :)

@MrLarsgren Год назад

jeez. you can get 2 component plastic .express version hardens in 2 minutes. comes in a double syringe like the epoxy. super strong and easy to work with.

@rcs0296 Год назад

most places have to have front and rear plates, seems weird not to, good video though,thanks again

@LakesideAutobody Год назад

This bumper is actually European - it's for the Opel version of this SUV - the whole new assembly was really inexpensive on ebay - that's why it's got the place for the European plate.

@rcs0296 Год назад

@@LakesideAutobody texas has to have front and rear plates

@LakesideAutobody Год назад

@@rcs0296 Hmm. I didn't know that. It seems like all states should have front and rear plates really :)

@MrTheHillfolk Год назад

Yeah but you don't need holes in your bumper for a front plate. Lemme introduce you to my friend self adhesive Velcro.

@tommak6516 Год назад

I think you were supposed to paint it black?

@MrTheHillfolk Год назад

I see a red door And I want it painted black No colors anymore I want them to turn black

@jonlobello7151 Год назад

Hey, you're using drywall hole patching techniques!

@LakesideAutobody Год назад

👍😊 - have a good weekend Jon - thanks for the comment :)

@jonlobello7151 Год назад

@@LakesideAutobody You too!

@RaysLaughsAndLyrics Год назад

NEIGHBOUR, “Hmmm... nice job eliminating the front licence plate mounting holes." SELF, “Thanks" NEIGHBOUR, “ But do yourealize our jurisdiction is returning to front and rear plates in January?" SELF, “ *@%~^# ”

@LakesideAutobody Год назад

Really! These holes were for European plates though so... Guess I'll have to drill some for Michigan plates if they go to front and back :)

@RaysLaughsAndLyrics Год назад

@@LakesideAutobody Of course I jest...Enjoy Ur Wknd.😀

@LakesideAutobody Год назад

@@RaysLaughsAndLyrics🤣👍

@MrTheHillfolk Год назад

Have you heard of Velcro?