How to Fix a Sagging Gate 

Here is an updated video with more detail: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mU5Y08vZxvo.html

$30 an like an hour of time fixed my sagging gates, and I have this video to thank. Thank you

I did this about 7 years ago with two bolts and a ratchet strap. It's still holding up, amazingly. I need to fix my fathers gate tho and your vid will help me do it right this time. Thanks! Edit: I get to do the thousandth like 😃🥳👍

Thanks for your for your video very helpful this is what my gate was doing thank you so much

Thank you for making this!

You saved a couple hundred bucks!!!!

You turned the buckle towards you to tighten. If the buckle was placed along the cable in the opposite direction (essentially backwards), one would have to turn it away from them to tighten. EXCELLENT vid, thank you.

Thank you for uploading!! I bought one, tried it out, fixed my issue!!

Thank you so much!! Much easier, then the heavy brace, I purchased & less $$.

Very easy to understand! Clear instructions. Thank you!

Cheers Bosso!!! Thanks for the great lesson. 😊

Awesome video. Going to do this on the backyard door

Looks like a great solution but it seems as though the gate has to be removed in order to screw on the bottom bracket.

What a neat video. Thanks for the help. Now I just need to learn my tools.... Socket wrench in particular.... I can't stand not knowing how to do things for myself.

Awesome video. Thank you sir

Often gates get a twist as well. This method works provided it doesn't increase the twist.

Thanks. Great video.

TY so much!!!👍👍

My ex did this for my gate in the back yard but the threads pulled out and now the gate sags again. =/ I suggest using Lock tite red to keep the threads from pulling,

Thank you sir.

How do u prevent it from warping after fixing the sag?

Thanks brother

I understand that the gate sags because of the weight of the gate causes the hinges to sag/bend. I was looking for a way to fix my gate with the hinges right off the bat. Would adding a higher gauge hinge / double hinges do the trick?

Hello, Can this product work on a vinyl gate?

Not to be too nitpicky, but it is called a wire rope clip. The “saddle“ is just one part of it.

Lol he said nuts

Be careful of this Ace product! I will be returning mine tomorrow. The turnbuckle threads (on mine) are such that turning either direction in the middle pulls in on one end and releases the other an equal amount; thus no tightening is possible! One end is showing metal shards so it must have backwards threaded itself somehow. Must be very cheap construction.

You’ve got a voice like honey.

Wish I could see where you attached the top. Never seen the whole gate.

Would it not be easier to cut a bit off the bottom of the gate?

Put a wheel instead 😂

Are you related to Mike Rowe??

Those gate kits can twist a gate permanently because they pull from one side.