How to fix Electric Parking Brake Fault (problem, warning light, dash error) Renault Scenic 2 Espace

Подписаться 119 тыс.

Просмотров 130 тыс.

50% 1

If you have a Renault Scenic 2 or Espace with an electric handbrake fault this is one of the way that you need to check or repair. In case you don't have a problem with microswitches, you can check for:
- brake fluid level in your vehicle (in case it's empty, fill it up until you reach the maximum fill line)
- electronic module (box) for the parking brake
- the cables from the electronic module (box)
- the handbrake motor relay
- the handbrake motor
Required tools:
- T20 Torx: ---- amzn.to/36xs4T8
- ratchet: ---- amzn.to/2XTBW9F
- trim tool: ---- amzn.to/3uy4FMd
- flat blade screwdriver: ---- amzn.to/3thkKWs
- contact cleaner spray: ---- amzn.to/3F0XKRF
READ THE COMPLETE ARTICLE HERE: ----- bit.ly/3ugTqsM
HERE you can find Renault Scenic 2 Accessories at the BEST PRICES: ---- bit.ly/3yh8QO1
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!
More VIDEO TUTORIALS on www.servicetutorials.com/en/
Follow us on INSTAGRAM: service_tut...
SUBSCRIBE our RU-vid channel: / @servicetutorials
This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!
If you have any suggestions about new tutorials, let us know in the comments section!

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@wrxstiga 6 месяцев назад

I want to thank you so much. I had problems lately with the handbrake. Didn't worked all times and this was , of course, big problem. Couldn't risk parking my car only with gear. Cleaned the board and in less than 10 minutes problem is gone thanks to your video. I really appreciate!!!

@Servicetutorials 6 месяцев назад

Thank you for your feedback!

@vicmanole2493 5 месяцев назад

Best video for me today. It really worked on mine car!! Thanks mate

@Servicetutorials 5 месяцев назад

Thank you too for the feedback!

@romangaleev5150 Год назад

Hi, thank for that video. My question is - can I ignore and drive the car with that warning? What problems I could have if I will be ignoring the warning? Thanks in advance.

@stevenjames4694 2 года назад

I just tried this and it worked. I had a warning triangle with a P in it. A red circle that looked like brake shoes and an orange rectangular service light, the handbrake was working but had a Warning coming up saying it wasn’t.I followed these steps, took the switch out, sprayed the micro switches with contact cleaner, reassembled and operated the levers a few times, reinstalled, operated the handbrake manually by the levers and lights have gone out, also works perfectly in auto mode. Before trying this I had put the car on a diagnostics computer, it said fault with BRAKE CONTACT 2, I take it this must have been one of the micro switches. I thought it was a problem with the brakes pads or something on the calipers.

@Servicetutorials 2 года назад

Thank you for your feedback, Steven! 👍

@stevenjames4694 2 года назад

@@Servicetutorials Thanks for being bothered to make this video.

@oldaccount612 2 года назад

Great video - I have done this previously and it worked a treat, the warning disappeared from the dash also. This time around, the warning light stays on, even through the handbrake works. Do you have any ideas how to clear this warning light without taking it to a garage. Thanks.

@ikonwuejeogwu6364 4 месяца назад

Good day, after fixing the brake switch issue do we have 2 flash the error so it stops displaying on the screen?

@crater682 Год назад

So, what about if the button (handbrake ) with the led light is stuck and the led light on it is not working and have a parking brake fault message? What could be the problem and the solution?