No video :(

How To Fix Faulty Breville Toaster Not Staying Down (Models VTT476 VTT969 VTT786 VTR013 VTT911)

Подписаться 11 тыс.

Просмотров 45 тыс.

50% 1

How to fix faulty Breville Toaster when the element is heating up, but the levers are not staying down. in the video we use a Breville VTT476, but the process would be the same or similar on the VTT969, VTT786, VTT892, VTT911 & VTR013. PLEASE REMEMBER TO DISCONNECT FROM THE MAINS BEFORE ATTEMPTING REPAIR. IF UNSURE PLEASE VISIT YOUR LOCAL ELECTRONIC REPAIR SHOP.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@adiuk09 2 года назад

Hi thanks for video. The Wife was looking to replace kettle and toaster 😬 so you’ve saved me £60plus. My middle screw was a torx screw in case anyone else can’t remove it. Outside screws Phillips.

@garyroe2929 Год назад

Brilliant that , nothing lasts anymore, my mother has one from 1984 , not a thing gone wrong in all the years , this new stuff is made not to last I think ! 👍🇬🇧🇬🇧

@linzerpa 3 месяца назад

Thanks from America! Was about to spend $200 on a new Smeg toaster, but my Breville is working again. My model appears to be impossible to open, but violent shaking and compressed air blasts did the trick.

@stevemiller2957 Год назад

Just tried your advice and it was spot on, haven't used the right hand side for months and now we can. Thank you for your helpful video.

@DomingoNegrinBrito Год назад

Took me a while to find out that there are two more screws hidden behind the back rubber stoppers. Once I could open it, it was easy to clean and that sorted out the problem. Many thanks!

@bernadettevella2457 Год назад

Thank you, I needed this comment. Toaster now working

@gordonbaylor153 11 месяцев назад

Thanks. I was at that point of 'bending' the front part a bit too far. This got me sorted 👍

@user-jo3os5dv5f 2 месяца назад

How to remove rubber stopper??

@box_of_paperclips Год назад

You have saved me from replacing my broken toaster!!! Only been using one half of it for months as the other wasn’t working, and now it’s fixed! Incredible work! Thank you so so much.

@nickfayers3345 Год назад

Couldn't get in mine as the screws were triwings! Still toaster upside, shaking and hammering the lever seems to have fixed the problem, so your vid still inspired the solution- and saved me 60quid thanks

@johnmooney185 Год назад

Same here. There I was armed with both Philips and Torx screwdrivers and it chucked that curve ball at me! 😂

@7407stressed Год назад

I whacked my Breville 3 times on the counter. Worked a treat

@stuartwalker1821 2 года назад

Brilliant. I had taken the cover off several times and cleaned the inside but hadn't cleaned the little magnet. I was about to buy a new one then watched this. It now works. Good man.

@mikejames663 2 года назад

Oh boy, brilliant, took me twenty minutes, job done, thank you.

@stuartgodbolt9694 Год назад

Worked for me! 20 minutes, took me longer to find a screw driver small enough to fit in the holes :)

@danielbowden4438 Год назад

Thankyou. Likewise. Saved the toaster from the unnecessary bin and me dismantling and forgetting how to assemble it.

@siksik6 Год назад

Thanks man, saved me buying another toaster and a bit of landfill waste!

@richardharrison7128 4 месяца назад

Great video, very helpful, saved us buying a new toaster, ours had some screws at the back also, star type in the middle and two normal screws in either corner which the feet had to be removed (easy enough with tweazers) to get to.

@TheScuderiaSteve Год назад

Thank you for sharing this video, you just saved us buying a new toaster.

@williams201083 4 месяца назад

Thanks for this, just saved myself £45 on a new one!

@iantimbrell5940 Месяц назад

Brilliant thanks, saved me buying a new toaster

@enriquemartinez16 Месяц назад

Outstanding! Thank you , kindly!!! It worked!!!

@farmersdaughterandpr Год назад

Thanks for this video. We had the same toaster and it wasn't staying down. Taken apart and found lots of crumbs.

@kawoolley82 10 месяцев назад

This worked! Although I did have to remove 6 screws, 2 of which needed a very specialist hexagonal bit which fortunately my neighbour had.

@peteledwidge3631 Год назад

Yep, sorted a similar machine for me. I had to use a file on the points as they were very dirty. Many thanks! 👌

@thekronabetters 2 года назад

Thank you very much. This video enabled me to resolve problem without removing buttons, which is a faff!

@TheBigfatmatt 11 месяцев назад

Awesome stuff mate! Just saved me £22, cheers buddy!

@GamezEntertainz Год назад

Just done this and was a success. Something you think they could easily protect more if you think about it, but then again their sales would go down so i am guessing its a business decision not to innovate a solution for something as simple as crumbs in the way 🤔

@robertleatherbarrow8816 2 года назад

Thanks for this post …spot on with the advice…crumbs on the sensor it was …Cheers..

@23meseta Месяц назад

Great advice thank you

@johnjudge6601 11 месяцев назад

Cheers saved me 35 quid on and thats discounted🎉

@diydan30 Год назад

Great tip, worked on my toaster. Thanks.

@Michael-mo5vp Год назад

Thanks worked for me, Thank heavens for "RU-vid".

@mrcoffee3373 Год назад

Worked great on my asda toaster thank you!

@NDBBDB 8 месяцев назад

Fantastic, thank you.

@maw570 6 месяцев назад

Thank you, fixed!

@shimeymerih 4 месяца назад

Thank you for the video. Good job.

@briancahill8281 2 года назад

So helpful. Thank you very much.

@pihokkerpeter8634 9 месяцев назад

Cool mate, I fixed mine 🎉😂

@Kevin-qz3bq Год назад

spot on thanks it sorted out toaster !!

@user-no9xn8gp1q 8 месяцев назад

Great video but I still have 2 outside elements not heating. Left side all good and right side centre ones work. Doesn't seem to be a break in any wires either. Any advice please?

@loading418 Год назад

u save my toaster. thx thx bro!!!

@komalsoft Год назад

Cheers for this. It sorted mine

@mariac3701 2 года назад

I have the same problem and exact same toaster (model number the same) I’ve taken out the 3 screws I just can’t get mine apart even tried a 4th screw but I can’t find anymore

@GamezEntertainz Год назад

There was two hiding under the back two rubber feet i had to remove. May be the same for yourself 😃

@markbraunstein 2 месяца назад

I have to replace a lost button on mine, I was able to obtain an extra defective unit so I have spare parts, just not sure how to remove the buttons, any advice?

@tonyfrewin4822 Год назад

Great video, thanks

@kevinhancock4064 6 месяцев назад

Yeah just onto ours same 1 but removed the cover entirely..gonna use compressed air to blow it all out to cause isopropyl alcohol to clean

@r.e9108 Год назад

Thank you so much 😊

@JC-jz6kk Месяц назад

Thanks

@mzjango Год назад

Thank you sir, this fixed the same problem for me - honestly the sensor area on the effected plate was not too bad on mine, only a couple of crumbs so I wondered if my issue lay a little deeper, though sure enough, I cleaned that area out, but it back together and it's working again!

@sikanderhussain2566 Год назад

thank you mate 👍

@Bladeplayer50 6 месяцев назад

Sadly, that didn't work for me! Any other suggestions, please?

@Mr-TM8 Год назад

I’ve got the same problem. Anyone know where I can buy the correct sized screwdriver please? Bought 2-3 already but they’re the wrong size!

@user-jo3os5dv5f 2 месяца назад

Screw out but machine not opening

@vgameplayproo4593 2 года назад

Hello, I do not know if you can answer me but I have a problem with my cash register. I don't know why when you want to make a header it is not saved correctly. I don't know if you know any solution

@ShopStuff-UK 2 года назад

Thank you for your message and for watching our videos. If you have a Casio till please check out our sister channel: ru-vid.com Thanks, Shopstuff