How to fix max collisions/no limits set/gate stalled error on Centurion D5 Evo gate motor 

Winston…Boet, YOU ARE the expert 👊 Thanks for simple and straightforward instructions that work 🙏. Subscribed 👍

Thank you so much. You clip was spot on. I followed your instructions and the gate is now working.

Winston, thank you so so much!!! You save me a callout I cant afford . I cant tell you how many times I sat outside on the ground trying to figure out other youtube instructions. Yours were simple.

I just watched this and managed to fix my gate with zero cents..thank you for this, really helpful.

I managed to fix my gate following your instructions. Thank you so much. You are the best.

Thank you Winston. Tried exactly as in your video and gate working perfectly....👌🏽Awe ma se kind...👏🏽👏🏽👏🏽

Thanx a million Bushie.This worked for me and saved me a small fortune.Much appreciated.

It worked for me… thank you so much 🙏🏾🙏🏾… saved me a lot of money because some installer saw d I should buy a new motor… Thank you 🙏🏾

Thanks just followed your routine and got my gate sorted. Gonna look through your other vids to see what other fixes. Thanks plenty.

Just finished fixing my gate now at 2.20am! It was making noise non stop, opening and closing by itself. I followed your tutorial and its fixed!!! You are the best!! I want to donate a few cents to you! you helped me thanks a lot

One thing, your video is on point, thank you, used your steps twice, worked everytime...

Wow, what an amazing video. Just followed the video to reset my motor after replacing the nylon tracks on the gate! Initially the motor wouldn’t verify the endstop 2, but after trying the second time it verified both endstops. It is working perfectly now!! Danko!!

Chair this was a nice one. Helped us fix ours. It couldn’t see our origin magnet. We just needed to redo and redo it till it found it. You’re the best Gee!

This is such a fantastic video. I've managed to fix our gate. Thank you so much

Thanks so much bud. Your video helped me out too. Set the limits using the wizard and now the gate is behaving itself. :)

Boet, most excellent video, been having big issues with my gate. After watching your vid it took me 5 minutes. Bloody brilliant.

Super duper mate..you operate like an expert. Well done.

Thank you so much, the video really helped and relieved me of Sunday stress of finding a technician

Mate, very useful video... worked like a charm... saved me from calling an expert out...

Thanks for this informative video, you just saved me a call-out fee. Turns out I just needed to tighten the rails & sweep the track of stones

Thank you thank you thank you 🙏 so much for this video of your, it help me sort out my problem. You are a star for someone that doesn't do gate moters 👌🙏🙌🙌😊😊😊

Wow! This is the most helpful video I have seen on RU-vid in a while

No cap detected. The video is very helpful. The method works wonders. Thanks a mil mate.

Dankie boeta. Selfde kak gehad met die hek wat sy eie gedagtes volg. Probleem is nou uit gesort. Dankie vir die vid... Jy is n champ💪👊

This is fabulous! Totally enabled me to sort out my gate myself. Thank you.

You are an expert Boss. I experienced a similar problem a this morning and managed to fix it by following your video. Thank you, you are a star 🌟

fisrt of all i just want to thank you for helping me fix my gate , it kept on saying "NO LIMIT" then INCONSISTENT...then i just kept on pressing those buttons and doing the action the i finally managed to fix the gate . NDO LIVHUWESA !! #NDAA

Hi mate, everything you did is the setup programming for the gate motor that is all good except for some minor faults. Once you turn the manual release to lock the gearbox again it is important to pull on the gate again to make sure the gearbox has engaged to avoid that "klunk" sound you heard. Also make sure the gate is closed half way or the designated pedestrian opening (for instance 1m open) lock the the gearbox, pull the gate and then do the settings that you did. Another way to avoid changing settings is to manually close the gate halfway, lock the gearbox, pull on the gate and then trigger the gate to close via a remote or button. That also gets rid of the max collision error. I noticed that you have the steel rack fitted on the gate, in time if the rack is not correctly space onto the gear of the motor it will cause a problem with that gear also. For the dirt build up, there is gate brooms (mr. Sweepy is whats its called in my area) that you can mount onto the gate on either side of the wheels to sweep that dirt away as the gate opens and closes. Another important thing for any sliding gate is, once the gate is on manual use it is important to take notice of how much force is used to either open or close the gate. The gate has to move with ease (be able to push with one finger). If there's a lot of force needed then it's best to inspect the wheels as a collapsed bearing will cause max collision errors also. All in all, great helpful video for anybody who has a Centurion gate motor. Centurion motors will hate me for saying this, the old D3, D5 and 1st edition Centurion motors was more stable and actually never gave so much of problems with collision errors. Ps. Not insulting you in any way, I am merely giving more pointers as I am a installer of all makes of gate motors. Peace be with you mate.

Ndza khensa swinnene ngopfu... I have been battling with this for sometime now and was reluctant to initiate a call out because I was certain this is a minor issue. I just fixed mine and i can say it works perfect now. This video just made my day thanks again. 🤟😁😇😎🙏

Thank you!! Your explanation was clear and worked perfectly

Thanks a million bud... Really helped me today. I had the same issue and your solution works perfectly God bless

🎉🎉you are my hero. I have lost so much money on this over the years 😅

You have great illustration and communication skills brother keep up the good work surely gonna use your video for future reference

Great vid, it was easy to follow and covered everything I needed to know

Yes it worked for me. We returned from a holiday to find the gate would only open part way. The Centsys D5 Evo interface is user friendly. It was an easy matter to run the gate limits as shown in this video. Just be sure to answer the question "Is the gate open?" correctly. After the limits were set when I tested it, it stopped halfway with a "battery error" message. So I had to replace the 7.2AH battery (simply disconnected old one and connected new one, without powering-off), re-did the the gate limits once again. And then everything is fine now. Thanks.

Thank you buddy so so much, I was unable to leave home for two days I could only walk😩🫣. Anyways mine didn’t get that fix immediately even after following you, even manual was failing since the motor was locked🔒. I had to remove that rotating wheel totally off the gate after cleaning the tracks. It only worked then after I removed the entire thing. And I somehow ended on settings that were talking about the opening and closing of the gate and I don’t even know how I got there. But anyways thank you, I am sorted, thank you so so much. Let me go and drive once again🚙🔥🥵😊.

Thank you so much, it has worked and I was able to fix my gate.

Shout out to Winston i just used your method to fix the gate and now it's perfectly working thanks to you from Gold Crown int hotel Johannesburg South

Video helped so much, thank u, been using it a few times now and working every time

Thanks mate. Helped me fix my gate

Your tutorials really helps my bro

Thanks bra u saved me from cost for fixing

Thankyou for helping me fix my gate!

Oh my goodness it worked thank you so much you just saved me R935 that I was already quoted for yuuuuhhh lemme subscribe 😊

thanks man 😊 you made my day.... I had the same problem today 🙏🏾

Thanks, problem solved from Zambia 🇿🇲

Thank you so very much. It worked. And you saved money❤

HI Broe Thank you for this video. helped me fix my gate.

Wow… Thank you so much. It actually works now.

Man I thank you so much, this video worked out perfectly 🙌🏼🙌🏼🙌🏼🙏🙏👊🏽

Thanks! My kids think I'm a genius. The just watched me fix our gate in the rain. 😂

Really helpful video! Thank you!

Great video 👌. Helped me sort out my problem.

Thank you. Sorted in 10 min👍👍👍

Thanks Bra for information really helped me big up

Thank you so much… it was super useful

Ohh my goodness I fixed my gate in less than 20 minutes thank you

Thankk you so much, please keep up the great videos.

Thank you very much! Very informative

You just saved me a callout fee...thank you!

Thanks. Worked like a bomb!🎉

Thanks brother 🙏 very helpful God bless

You're a legend. Thanks a mil

Thank you for your tutorial its works ❤

Dankie boertjie. Jys sharp.❤❤

Thank you. I managed to get it fixed.

Good day brother..thank you very much.problem solved.God bless

You are my hero! Thank you so much ❤my Bushie, it worked 🎉

Thank you. This was very helpful.

Thank you a million times!

It really helped me thank you

Thank you so very much ❤ God Bless You

Thank you Buddy your video really helped me👍

Thank you very much it’s very easy it has worked for me ❤😂

You are a star!!! Thank you so much!

Thanks a lot, it works perfectly

Excellent video .thank u !!

Thanks broer ,I have managed to fix my gate .

Thank you for this video very helpful

Nice video, my display has faded so watching you through the menu structure helped. Keep up the good work. From Australia

Really helpful thank you

Thanks man! I Just fixed mine.

Thanks, it was helpful

Very helpful fam, cheers 🙏🏾

Thanks 👍👍👍 Was able to fix my gate 😅

Thank you so much. Gate sorted

Thank you. You demonstration helped. ❤❤

Hi, thanks for sharing this helped a lot though my problem was worse, the origin magnet was actually missing.

Thank you it worked😊

Thank you. This works

THANK YOU SO MUCH😭

Waouhh thanks a lot brother. It has worked

Thank you very much

Appreciate it fam 💯

Thanks this was helpful

Thank u so much 🎉🎉🎉

Thank you. Solved my probleem.

Thank you bro 🙏🙏🇲🇿

Ahwê ma se kind. Díe bushy is slim. Dankie mos 🙏

Awesome, thank you. Saved me some money 😊