How to fix Paint Chips and Road Rash, without repainting your car. - Dr. ColorChip

Просмотров 41 тыс.

% 695

Time to fix my first "major" paint chip, using touch up paint from Dr. Color Chip. It's super easy to use, and it's designed to match your paint color. This fix works for ALL colors, single stage, or two stage, ie Clear Coats. Just get your paint code from your vehicle and head over to: www.drcolorchip.com
FMG Hats now available! Three color combos... check em out; www.etsy.com/shop/fastmontysgarage
Subscribe by clicking this link, it's free; ru-vid.com
This channel is all about muscle car how to's and what to watch out for, when working on your own car. Also fresh off of installing a New TREMEC TKX from Silver Sport Transmissions, and a FiTech fuel injection system. Subscribe to watch more projects on this built, not bought, 1969 Pontiac GTO.
Part's and/or supplies used in this video series;
My Amazon storefront, for all parts, and tools I use, including Pontiac Shirts;
www.amazon.com/shop/fastmontysgarage
Here's the latest Walk Around of the GTO, filmed by RestoMods.com ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NcgjQYOGmV8.html
Playlists of interest;
Hydraulic Clutch and Tremec TKO/TKX install;
ru-vid.com?list...
FiTech Fuel Injection Install;
ru-vid.com?list...
Here's the original Hydraulic Roller Lifter Fail Inspection, and process:
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y_iPx4CiMTg.html
Here's the Official Part 1, where Mike starts the preparation of Engine removal
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VWt2QxXOgOE.html
Here's the start of the TREMEC installation, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nDDeZrqF3cs.html
#GarageBuilt #MuscleCar #builtnotbought

Авто/Мото

Опубликовано:

21 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@FastMonty 2 года назад

Be sure to subscribe for more, click here; ru-vid.com Then get your FMG hat here; three color combos www.etsy.com/shop/fastmontysgarage

@vermin1970 Год назад

I was an early adopter of this product on my Mica black metallic Mazdaspeed 3. This product works, when finished, you basically had to know where the chip was before and look at it real close in the right light to see where the chip was. The repair seemed tougher than the original paint and I never had a chip appear again in the same spot. I now purchase a kit for every car I own.

@FastMonty Год назад

Awesome! Thanks for the comment, I love it too!

@firebird5288 Год назад

Thank you! I'll be getting this kit for my 98 W68 Firebird.

@FastMonty Год назад

Awesome! It works great, just be patient... have fun!

@HeliRy 5 месяцев назад

Pretty good result on a dark colour like that! I’ll probably get some for my white vehicle and it’s rock chips. Should be much easier to make those vanish.

@FastMonty 5 месяцев назад

It'll work even better on a white car... might need a few coats, take your time, have fun!

@gregschultz2029 2 года назад

Nice Repair ,Thank You !!!

@FastMonty 2 года назад

Thanks Greg!

@billmiller5075 2 года назад

Great info Mike

@FastMonty 2 года назад

Thanks Bill!

@briankirby1320 Год назад

Love the channel. Any chance you can put together a series of when you painted your car?

@FastMonty Год назад

Thanks Brian... If and only if, I have to paint something. As you can imagine it's extremely time consuming, let alone trying to video it. If you're in a dire need to learn. Google Kevin Tetz. I learned from his "PaintUcation" program. See ya soon!

@justanobserver530 2 года назад

Wish I knew this before. I had my favorite body shop mix me a little bottle of paint and those spots that I touched up look better than the chip but still look like crap to me

@FastMonty 2 года назад

It's never too late... ha, ha... Thanks for the comment!

@Goodoletom916 2 года назад

Great video

@FastMonty 2 года назад

Thanks Tom!

@johnmilner7603 2 года назад

I had a spray can made up with my paint code from Napa. I spray into a rattle can lid, apply paint to the chip using a fine artist paint brush, then when dry, I use a binder hole punch and punch out the grit of sandpaper I need and also punch out 2 way tape. Then using the eraser end of a pencil, I stick the tape on it then the sandpaper then wet sand the touch up in a circular motion cause it’s so small. Then buff with compound and wax.

@FastMonty 2 года назад

Thanks John... love the ingenuity! I'd imagine that most of us aren't comfortable with color sanding, so Dr ColorChip is definitely the work around to your near perfect solution. Awesome comment, thanks!

@mneeley7496 2 года назад

Does it need a clear coat?

@mikemontanari 2 года назад

@@mneeley7496 no, it's supposedly a custom formulation that mimics it. Strange, but works.

@Danno74Z 11 месяцев назад

Hi Monty, You mentioned in previous videos you painted your GTO in your home garage. By chance do you have any videos of the process you went through? Old paint removal, primer, body work etc. Thanks

@FastMonty 11 месяцев назад

Sorry brother, unfortunately I started my RU-vid career after the car was finished. Eastwood has some great tutorials on body work, etc... It's a ton of work, but very rewarding when done.

@BigDawgBlevens 8 месяцев назад

Awesome video man, great demonstration on how to use the product. I have a couple of paint chips on my car that I would like to fix, but I have a layer of ceramic coat covering my paint. Will that be a problem when applying the product??

@FastMonty 7 месяцев назад

Thanks for the comment... yeah, I suspect the ceramic coating might be an issue. But, there's nothing wrong with trying it anyway. If it doesn't stick, you'll have to polish the area to remove the ceramic, and try again. Let us know how it goes!

@jf3180 6 месяцев назад

Same, I have a Modesta bc4 layer and it doesn’t seem to be as effective, but I’m going to just keep applying some more layers

@FastMonty 6 месяцев назад

Agreed... be patient between coats, it should build up. Let us know! @@jf3180

@chenglo8999 2 года назад

My car has ceramic coating around chipped area. Ofcourse chips no longer have coating. Would this still work? Im guessing new paint and sealact will just not stick to ceramic coated areas but WOuld adhere to chipped area. Thoughts?

@FastMonty 2 года назад

Yeah, I agree with that theory. Worth a shot!

@dailwhite7153 7 месяцев назад

good video , wondered what your color is? i have a 67 mustang painted with a GM color which looks like yours...need the code. it may be Dark Polo Green Metalic? would help me out thanks

@FastMonty 7 месяцев назад

Thanks! It's not a GM color... it's a Jeep Grand Cherokee color Black Forest Green Pearl Sorry, probably won't match your GM color, maybe it's Midnight Green?

@nukeelda 8 месяцев назад

Tnx I will buy it .

@FastMonty 8 месяцев назад

It totally works. Be patient with it. Have fun!

@MReiterRealtor 2 месяца назад

I thought I saw the guy from the company use the other side. Just trying to be helpful. 👍🏻

@FastMonty 2 месяца назад

Hmmm, well, to your point, I don't think there's a wrong answer. It's the same material all the way around. Thanks for the comment!

@stephencorbo9164 2 года назад

Can you use this product as well as the prep cleaner if there is a ceramic coating on the car?

@FastMonty 2 года назад

Good question... Ideally, no. If you have any ceramic or wax INSIDE the chip, the paint won't adhere to it. If it were me, and ceramic was inside the chip, I'd try it anyway. I honestly don't know how you'd remove the ceramic, from a hole/chip. As the only way to remove ceramic from the paint surface is to polish it off. Let us know how it goes!

@b2ja03 Месяц назад

I am curious do you go into detail on how you keep your car clean? Mine will be getting painted here soon(black) and i am wondering what you do or your process to keep your car clean, also not put any marks in the clear coat during cleaning etc. do any of your videos cover that or do you have some tips on what you do. I know this color will show dust alone just being parked in the garage over night. Wash, wax, spray detailer???? Thanks for any help.

@FastMonty Месяц назад

Good question... lot's of methods out there. I currently love Ceramic Coating, with a complementary ceramic waterless detailer. Check out the Avalon King products, in my playlist, here ru-vid.com/group/PL0VCtZe2W6eb-TdHI1TktbWesxa4inRWw&si=0K5kgpvpLItU39gX (By the way, you probably have to wait a few months to let the clear coat fully cure out.) Have fun!

@dtna 2 года назад

I apply 4+ THIN coats. No problem.

@FastMonty 2 года назад

Nice! Agreed.

@sandkeyfred 10 месяцев назад

Will this procedure fill in two small dings as well as the chips with several applications?

@FastMonty 10 месяцев назад

Probably not good to use on the dings... I believe this stuff needs a "hard edge" to rest against. Good luck!

@AnotherOverTaxedTaxPayer Год назад

can we put a dab of clear coat over the newly repaired paint chip?

@FastMonty Год назад

Good question... it's not recommended, BUT, in theory, you could try it after the divot dries. Add clear, so it's higher than the surrounding, then sand it/polish it flush. OR, just add more layers of Dr. Color Chip, until it's level, and you can't tell it's there. Let us know if you get the Clear trick to work.

@kingbotzcustoms 2 года назад

Is it critical that you use the paint they send you, or can you use the dealer touch-up paint & aftermarket touch-up paints as well? Thanks!!

@FastMonty 2 года назад

Great question... I don't know the formulation, but, I'd be willing to bet there's some sort of proprietary mix of pain in their kit. To be safe, I'd use what's in the kit. If you find out otherwise, let us know! Thanks for the comment.

@kingbotzcustoms 2 года назад

@@FastMonty It is proprietary indeed, I just heard back directly from them on this, here's what they said: "The SealAct blending solution is a proprietary product developed to work with our paint only. It will not work with regular touch-up paint. Best results are achieved using our touch-up paint and SealAct blending solution as directed in the repair kit instructions." 😎

@FastMonty 2 года назад

@@kingbotzcustoms HA! Settles that. Thanks for finding out!

@carbonoxx 4 месяца назад

that could be something they made out to sell more expensive touch up....@@kingbotzcustoms

@frekkledipped 2 года назад

I have 2 large chips about the size of a nickel and deep on the end of the door & quarter panel, right on the edge. So how the heck would you do that? I guess I would have to build some sort of dam? Piece of tape maybe, I dont know never done it before. I have the paint, its old style no clear coat. Came with the car

@FastMonty 2 года назад

Yeah, that's a large chip alright. The proper way to fix that is to sand and paint the entire panel... which would really mean paint the entire car. I know you don't want to do that. So, plan B would be to fill those chips with paint... which will be several coats. You'd have to fill it enough so the chipped area is higher than the surrounding paint. After that cures, you now have to wet sand it down to level. Then cut/buff/polish. Yes, it's a pain the ass... but, that's what I'd do. Hope that gives you some ideas.

@maxfriedenberger8043 11 месяцев назад

wow awesome.

@FastMonty 11 месяцев назад

Thanks! Yeah, I love it for all of my cars. Thanks!

@maxfriedenberger8043 11 месяцев назад

great love ur channel@@FastMonty

@FastMonty 11 месяцев назад

Thanks Max!@@maxfriedenberger8043

@kongthao6549 2 года назад

Can you send me the link to buy the product?

@FastMonty 2 года назад

Google is your friend. :) go to DrColorChip.com

@willyuan1 Год назад

after each coat do i need to use isopropyl alcohol again to clean the spot? or just in the beginning?

@FastMonty Год назад

Good question... just before the first application. Have fun!

@willyuan1 Год назад

@@FastMonty i’ve filled in a big chip nearly 90% now but the remaining chip the paint keeps pulling out whenever i use the sealant. any advice to completely fill it in?

@FastMonty Год назад

@@willyuan1 Maybe try and wait longer between coats so the prior quote dries thoroughly?

@willyuan1 Год назад

@@FastMonty good point the longest i’ve waited was 15 minutes but usually just 5 min

@FastMonty Год назад

@@willyuan1 Yeah, it depends on the thickness, nothing wrong with waiting even longer.