How to Fix Quadcopter Drift (Easy) - FlySky i6x, BetaFlight - Quadcopter Drifting on it's own

Подписаться 42 тыс.

Просмотров 28 тыс.

50% 1

Is your quadcopter drifting even when the transmitter gimbals are centered? This may help you! I'll show you how to add Deadband to your quadcopter in BetaFlight to help dampen jittery sticks.
#betaflight #quadcoptertroubleshooting
Please buy through these links to help me continue serving you!
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
MY GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
FILMING GEAR
Main camera amzn.to/2pGZA4L
Action Camera amzn.to/34GX28O
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam makes FUN and HELPFUL videos about Radio Controlled aircraft, tech, and DIY projects! #RCwithAdam

Наука

Опубликовано:

14 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@NavneetSharmaa 4 года назад

I have facing same isse but have searched many video but no one solved my problems...but your video solved it today of ❤F450 quard.

@daviddouglasspeidel 3 года назад

Thanks buddy I was on the right track noticed the stick was making my preview drift ever so slowly but thanks to you I know what deadpan is all about. 😄

@joegirty6609 4 года назад

great tip. hope your set up video for this drone helps me set up my mobula 7 i just bought.

@calebyoung1018 4 года назад

Thanks Adam! I built a quad today and it did this so this video was really helpful!

@RCwithAdam1 4 года назад

Hi! Congrats! What kind did you build?

@calebyoung1018 4 года назад

@@RCwithAdam1 I commented this reffering to a qx90 brushed but that quad is decommissioned now. I just finished building my first 5 inch and if your on instagram you can see it @ inertia_fpv. I am also planning on adding more quad stuff to my new youtube channel here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lznvmSqzz9k.html

@rcsproject627 3 года назад

Thanks Adam. I had to go into the subtrim and adjust the settings. I'm now at 1500 for the top four. Cheers.

@RCwithAdam1 3 года назад

Fantastic! 👍

@leveldoubt 3 года назад

Great Info, Bless Up

@Kenflyer 3 года назад

Thank you so much !

@rosco4659 3 года назад

As soon as you said deadband the penny dropped, thanks for the video.

@Robocopter_fpv Год назад

I subbed because the way you said computer had me laughing for a good 10 minutes 😂

@kumardeepam 2 года назад

thanks for the video.

@marcoguada42 3 года назад

I was just pressing those buttons on the i6x without knowing that lol I guess I understand now why the poor tinyhawk was drifting that much Thans Adam!!

@RCwithAdam1 3 года назад

lol that would explain it!

@8anos8anos 2 года назад

SOLVED! FOUND PROPER FIX! Thank Adam that u r pointing out those quick solutions but there r not perfect as we all know. From my personal experience in case of trim, never was so solid as i was flying or it drifting again when changing modes. Then i see Deadband here but it was clear NO for me cause is a downgrade. My drift started when i Change from a XR602T-A to a Flysky X8B receiver. Today i tested again with my previous RX with his chopped antennas. NO DRIFT! Thank God i found my quad after 1 hour in Dark :D SOLUTION: BAD or DAMAGED RECEIVER

@RCwithAdam1 2 года назад

Glad you found a solution that worked for you! 🙌

@8anos8anos 2 года назад

@@RCwithAdam1 I made further tests those days that i wanted to share with u guys. I installed a new one receiver but drifting again! For interference exclusion, I tried without any heat shrink neither on antenna nor on the receiver, as on different places but nothing solved. When i swap to my CROSSOVER RX XR602T-A even without antennas, then NO DRIFT! How can u guys explain that?

@victormichel6654 4 года назад

THX!!! really helped me out here !

@RCwithAdam1 4 года назад

Glad it helped!

@Chan0the0Man 4 года назад

I tried to compensate that with expo... And it flew worse and worse. Just begun to live with it. But than booom, this video came out. Haven't tested it yet but thanks anyway!

@ValFPV 3 года назад

How to do this with a betafpv literadio 2? It's got no screen and no trim buttons..

@FungSit 2 года назад

what if it's less than 1500 ? can i use negative number in deadband?

@gonzarb93 Год назад

this drifts are not happening in acro mode right? only in stablilazed modes?

@ibrahim6837 Месяц назад

When i roll the drone it rolls slowly and Recalubrate slowly how can i fix it 😢

@michael3573 2 года назад

Huzzah!!!

@chrissnipes5134 4 года назад

Hey Adam, I did what you recommended in this video. My quad was slowing rolling left until I did this. I also calibrated my accelerometer. All my trims are set to zero. However when I get my quad up it starts out fine and then slowly starts rolling left worse and worse. Using a Turnigy Evolution, which I also calibrated the gimbels on. Any other suggestions?

@RCwithAdam1 4 года назад

Hi! Does it start rolling when connected to betaflight, or only during flight? Could be a bad gyro, or maybe the flight controller mount is a little loose?

@chrissnipes5134 4 года назад

@@RCwithAdam1 thanks for replying. It only does it flight, not in Betaflight. I was using 3s batteries at the time, and my motors and stack were getting very hot. I tried it on 2s on the left roll stopped. The stack and motors aren't getting hot anymore either. Not sure why it does it on 3s and not 2s but at least it's flyable. It also fly rights in acro on 3or2s.

@tiagocarvalhosa5849 4 года назад

It's happening the same with me, it's starting to get annoying always landing to restart it, did u figured it out?

@3drccustombeasts381 2 года назад

I'm at work but if this fixes my drift when I get home I'm sending you virtual high five and hugs

@curryman9316 3 года назад

My roll is 1505 and my pitch is 1501 so can i dead band this for the roll too?

@RCwithAdam1 3 года назад

Yep.

@dhitikagarwal3834 3 года назад

Which type of USB cable we have to use

@invention_beats 3 года назад

probably a usb micro to regular usb data cable

@sweetcollegegirl960 3 года назад

I have a apm2.8 hiw to fix in mission planner Pls help me out

@RCwithAdam1 3 года назад

What is the problem your having with it?

@sweetcollegegirl960 3 года назад

@@RCwithAdam1 there is glittering in my gimbal I use fsi6 tx and my apm2.8 is drifting in loiter

@kumardeepam 2 года назад

my throttle is showing at 988 and not 1000, is that ok?

@RCwithAdam1 2 года назад

Hi Kumar! That is pretty common, also due to the quality of the gimbals. It's fine. The important thing is being able to move the gimbal so that the maximum and minimum positions are higher and lower, respectively, than the max and min values shown in betaflight. For example, if the throttle minimum value is 1000, but your throttle stick could only move to 1100, then you would never be able to reach the motor "idle" value, which could make arming impossible (throttle must be below a certain value before the flight controller allows the quad to be armed). Does this help?

@kumardeepam 2 года назад

@@RCwithAdam1 thank you 🌞