How to Fix YOUR gas Dryer that is not heating up (Part 2- front panel)

Просмотров 423 тыс.

% 5 279

Part 1: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QP1Z4OWjTuA.html
This video will teach you how to troubleshoot your gas dryer. My gas dryer would not heat up so I will show you the three main pieces in the front of the dryer that should be checked using an ohms meter. It is very easy to do and ANYONE can do this. Just to get this thing checked by a technician would cost $100. Then any parts, which are 4x the price you can get them at, plus $100 or more an hour for labor. By the time you are done, they will charge $250 to fix your dryer (half price for a brand new one). This job takes 1hr if you take your time, and the parts cost under $10.
Here is where to get the multimeter tester: www.amazon.com/gp/product/B001O1X65A/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B001O1X65A&linkCode=as2&tag=chri0e2-20&linkId=L3A3XFVJXIFWVON7
Thermal fuse (Kenmore, Whirlpool): www.amazon.com/gp/product/B006H7HB7K/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B006H7HB7K&linkCode=as2&tag=chri0e2-20&linkId=EK7VLEGDDPZYT6JP
Gas Solenoids (Kenmore, GE, Whirlpool): www.amazon.com/gp/product/B004XLDEAU/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004XLDEAU&linkCode=as2&tag=chri0e2-20&linkId=W6K2NRUFS6AQIINJ
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday**
-Website: www.ChrisFixed.com
-Facebook: chrisfix8
-Twitter: ChrisFixed
-Instagram: chrisfixit
-Subscribe Here: ru-vid.com
-RU-vid Channel: ru-vid.com
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Хобби

Опубликовано:

19 мар 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 647

@aztekiescorner6320 Год назад

Bro!! First you fixed my car now my dryer…. Damn the service you provide has no limits..Thanks man.

@chrisfix 10 лет назад

Awesome!!! Great job and thanks for the comment! These two videos are helping a lot of people and I love hearing it!!!!

@chrisfix 11 лет назад

No prob! Hope it helped!

@MrUsaer 8 лет назад

Excellent videos! Good camera shots and very clearly explained. Many years ago I remember calling repair guy out. He charged me around $100 to replace that cheap 7 dollar thermal fuse and it only took him less than 15 min. That is when I decided I need to do my own washer and dryer repairs. My dryer is about 25 years old and I average replacing something on it every 3 or 4 years. I never can remember exactly how I fixed it the years before without reviewing internet and notes etc. Your 2 videos are the best by far and will be all I need the next time I need a refresher course. Thanks!

@vvince2855 2 года назад

It may be 9 years old video but you helped me fix the dryer. It was weak solenoids. Got new ones from Amazon for $9 and it worked. Thanks

@eugeneewe5 8 лет назад

Thank you! First time home owner, moved into the house for about 5 months, the seller left behind the dryer it,s been working fine till 2 weeks ago. I've saved over $165 having someone over to fix it or getting a new dryer! My dryer didn't heat up, I replaced the solenoid $20, cleaned my dryer throughly. It's working now! This is the best video so far after searching for awhile, didn't help with the issue, I like your step by step showing how to find the problems and fixing it! Great job!

@chrisfix 11 лет назад

Thanks a lot! Comments like this make shooting these videos worth it!!! Glad you fixed your problem!

@chrisfix 11 лет назад

No prob! Glad it helped!

@chrisfix 11 лет назад

No prob! Glad the video was helpful! Let me know if the problem is fixed!

@chrisfix 10 лет назад

Glad the video helped! Yes that is called an ignitor. Let me know if that does the trick!

@chrisfix 11 лет назад

You usually wont get the glow or click when the thermal fuse is bad (it is a fail-safe to protect from fires and stuff). And you are spot on with your last statement. If you dont get a glow (assuming the fuses and thermostats are ok) then its prob the ignitor. If the ignitor is glowing but there are no clicks, its prob the solenoid. Only way to know for sure is to test them with an ohm meter.

@roryannjim 8 лет назад

I've now used these videos (part 1 and 2) TWICE to fix my dryer. Last year it was the fuse in the back, and this time it's the flame sensor thermostat (the very last thing Chris shows beneath the drum). Well done, and much appreciated, Chris!

@sallynorris118 8 лет назад

Thank you! My dad and I managed to troubleshoot and fix my dryer with your very clear guidance. Great video.

@chrisfix 11 лет назад

Awesome!!! Glad you fixed the problem! Saved some money and it feels pretty good right!

@kendrapace4440 10 лет назад

Thanks so much for all your help! I had the components on the back checked and they were all good. So I bought the solenoid coils and replaced them. Dryer works perfect now! My hubby was soooo impressed that I fixed it on my own - all thanks to your video!! Thank you!

@jasonjackson4555 6 лет назад

Dude. You're a lifesaver! It was the thermostat next to the burner. This is the only video that talks about that thermostat. I almost gave up on my dryer until I saw this video. You saved me a ton of money!!! Thanks a lot!!!

@chrisfix 11 лет назад

Thanks for the comment! Did you check all of the thermostats with the multimeter? Did you check to see if your gas is on?

@mel1272 8 лет назад

Just wanted to say "Thanks". With Parts 1 & 2 help, I fixed our Kenmore dryer in 2 hrs including "parts run' for $32.

@chrisfix 10 лет назад

GREAT! Glad the video helped you fix your dryer!

@darlenegarvais226 9 лет назад

Very helpful. My husband and I are not normally DIY types, but we followed your instructions and avoided a huge expense. Thanks so much!

@redpunzel 11 лет назад

I NEVER leave comments, but I have to say after watching close to 30 videos on dryer issues, yours was the one that solved the problem! Mine would initially heat, but then it would turn off and not heat anymore. (The "glow" would happen, the gas just wouldn't ignite) So, off to change the solenoid! Thanks so much for posting this. Saved me hundreds of dollars I'm sure!

@patrickminns8814 10 лет назад

Chris, you are a ROCK STAR! I went to a local appliance parts store and picked up a pair of solenoids for $24, installed them after performing the trouble shooting steps in the first of your videos. You hit the nail right on the head in the second video and upon installing the new parts, my dryer worked beautifully! You saved me about $400 because if this had not worked, my wife would have gone out and purchased a new dryer! You have an awesome talent that I cannot thank you enough for sharing with us out here in do-it-yourself land. I subscribed to your channel and will be investigating what other repair advice you have in store. Outstanding job sir and thank you a million times over for your excellent videos!

@chrisfix 10 лет назад

Patrick Minns Great! Glad the video helped you save money, learn something new, and fix your dryer! I am glad you like my other videos too!

@PrincipalScratcher1 7 лет назад

DUDE!!!!!!!!!!!!!! You are a freaking LIFESAVER!!! I did exactly what you said, and tested the thermal fuse breaker. I replaced it with a 3 or 4 dollar replacement. BOOM! the dryer is operating just like new. Thank you for doing this video.

@parallel88 10 лет назад

Great instructional video. I have a similar dryer 60 series kenmore and similar problem. Replaced the solenoids and dryer worked fine.Saved me a lot of money and wait time for a repairman .Dryer was fixed the same day it broke down.Getting the solenoids from a closest parts store was what took a lot of time.This video provided great instruction in narrowing down where the problem is., Thanks

@chrisfix 10 лет назад

Thanks!

@chrisfix 11 лет назад

Thanks and good luck!!! Let me know if you find the problem!

@TammieSherk Год назад

After watching your video, I took a chance and tested my circuits and found the bad part and ordered one for $5 and got it on today. We have heat!! Thank you for showing me how easy it was to fix it myself, saved me a lot of $$.

@charlesballardiii249 6 лет назад

I needed to have the dryer fixed and didn't have 100 to 200 dollars to spend on it. Googled and found your video. I followed it step by step and found the problem in the front of the dryer. There was no click. Purchased the part, put it in, plugged it in and turned it on. Then removed the peep hole on the bottom left and watched and listened. I saw the pink glow and shortly there after i heard the click and the gas flame on. We have 4 babies under 2 years old and 6 children under 7 years old. This was a life saver. I spent less than $25 for the two parts. Thank you, Thank you, Thank you

@riverking4u 7 лет назад

You are one amazing guy. You have a love for fixing problems, while the rest of us cower in fear. Thanks so much!!! Keep'm coming Chris.

@chrisfix 10 лет назад

AWESOME!!! Thanks for keeping me updated and congrats! Glad the video helped!

@islandminis2833 3 года назад

Hi, I see the glow and hear the click but NO FLAME? Once I here the click the glow shuts off. Need help

@chrisfix 11 лет назад

Great! Nothing better than saving some money and the feeling of accomplishment of fixing it yourself!

@chrisfix 10 лет назад

No prob! Glad it was helpful! Thumbs-up the video if you havent already, it helps me out! Thanks

@chrisfix 10 лет назад

I couldnt tell you for sure because I cannot check it myself but I have a feeling it is the thermostat. Just search for it on amazon. If it is cheap, I would get one. If it was my dryer, that is what I would do. The thermostat is probably not working properly so even though it has a positive reading on the multi-meter, when it heats up, it gets messed up. What happens if you start the dryer, let it do its cycle until it wont light up again. Then shut it off, and restart the cycle? Does it light?

@josephtrimner6126 5 лет назад

Chris, You are my favorite...you explain things in the order of my thought process and exude confidence to tackle it and "done"!

@chrisfix 5 лет назад

Thanks a lot!

@miketarle1279 3 года назад

Already a subscriber for your more recent videos but found this video after my dryer stopped heating. Checked my solenoids (one didn’t have continuity!) and found replacements for $10 on Amazon. Fixed my problem and saved me hundreds! Thank you!

@LPerla46 10 лет назад

Chris, you are good man! I bought a pair of solenoids for $9.40 at Amazon.com, installed them after performing the trouble shooting steps in the first of your videos. You hit the nail on the second video and upon installing the new parts, my dryer worked beautifully! You saved me about $584.00 because it this had not work, I would have gone out and purchased a new dryer! You have an awesome talent that I cannot thank enough for sharing with us. Outstanding job man and thank you for your excellent video. I had this problem; I turn dryer on, I see the glow, solenoid clicks and there is flame. About 35-45 seconds later the gas shuts off. No flame. If I restart the dryer it does the same thing. New solenoids fix it! Than you again.

@chrisfix 10 лет назад

LPerla46 Great! Glad the video helped you fix the dryer and save a ton of money! That is why I make my 'how to' videos!

@chrisfix 10 лет назад

No, if the igniter is glowing, it is working. If you tested everything else like in part one, I think it is the solenoids. They should click which means it is letting the gas though. Its an easy cheap fix.

@snakefinger 3 года назад

Extraordinary Helpful just invested in a 100 plus meter and I’m about go figure it out. Thank You So Very Much !

@catchmeifyucan1 8 лет назад

excellent description, great video close-ups, great explanation. Thank you so much. You just saved me at least $100+ on labor plus the 3X mark-up on the part which was a thermal fuse costing me only $10.95. Highly recommended site

@chrisfix 11 лет назад

did you check the solenoids? Does it glow orange in the peek hole when you try to run the dryer?

@Highsnows33 10 лет назад

THANK YOU THANK YOU THANK YOU! I'll start out by saying I've replaced my washer THREE times and dryer TWO times in 12 years! My dryer stopped heating yesterday and I couldn't see spending money to replace it yet AGAIN. I found your video and followed your steps and it turned out to be the rear thermostat. Cost me $20! Now I understand how they work AND how to trouble shoot the basics.....seriously THANK YOU!

@chrisfix 10 лет назад

No problem! Glad I was able to help! Glad you saved some money and learned a lot along the way!!!!

@chrisfix 11 лет назад

The flame should start about 10sec after the glow. If not, then you are not getting gas to the glow/ignitor. Check that gas is coming out of your gas line (make sure it wasnt turned off). Check to see if the new solenoids are working properly.

@kendrapace4440 10 лет назад

Thanks for your quick response! I took all of the components off the back of the dryer and am taking them to a local appliance repair shop tomorrow to have them test them - I don't have a multimeter. I can also purchase the failed component their as well. If the components all pass the test then I think I will buy the solenoid sand bring them home and hope that fixes the problem. I wii report back! Thanks for your help!

@triTube70 8 лет назад

I fixed ours for $6 parts from ebay. Solenoid went bad with our Frigidaire dryer. Thank you so much Mr ChrisFix for sharing this video. God bless you.

@chrisfix 8 лет назад

+triTube70 AWESOME! Glad the video was helpful and nice work!

@daniellestringer4570 5 лет назад

As usual. Mechanical. Batteries tie rods. Dryers. The list goes on. You explain it best. Thanks Chris

@glenhalstead2301 8 лет назад

Thank you for sharing your knowledge. As stated in your video you probably just saved my family at least $200. Fix wasn't difficult at all. Probably most time consuming part was disconnecting the "open/shut door sensor". I just couldn't get it disconnected and video wasn't clear how you so easily did it. I was worried about breaking it so took my time. But now it's done and dryer is working again. Thanks for listing the parts and parts numbers. I was able to go to my local Sears Parts & Repair store and pick them up earlier today. Paid a little more than ordering from Amazon but zero waiting! Entire fix was about $40 (I picked up a new exhaust tube as well). Again, thank you and God bless!

@chrisfix 8 лет назад

+Glen Halstead AWESOME!

@louiscsefko126 10 лет назад

I have a Kenmore 80 series gas dryer, two years ago I replaced the over temp sensor thanks to your tutorial, however this wee it was blowing cold air. I checked all the thermostats and were good continuity. All seemed to work just fine but after a few minutes nothing but cold air again. Today checking the glow (which was fine) but no flame, I purchased two solenoids as they come in a pair, re assembled it and its been working like a "charm" Also splurged on new ducts and cleaned all the remaining lint. Your tutorial was excellent and much appreciated THANKS. By the way the Kenmore 80 has the solenoids up front just like in your video.

@chrisfix 10 лет назад

Perfect! It is usually the solenoids in the case you mentioned when everything else checks out!

@dalestruck3337 7 лет назад

You did great job and helped me to fix my dryer. My wife wanted to buy a new one instead I bought a small part and it was back in business again.

@chrisfix 10 лет назад

AWESOMEEEE!!! Nice job and thanks!!! Glad you got it working!

@chrisfix 11 лет назад

Sweeet!!! Nice job! I am glad the video helped!

@khalilt6508 4 года назад

Thank you for this video Chris it cost me $20 to fix my dryer in about an hour and you also helped me recharge a car air conditioning system thank you

@andrewgifford8706 7 лет назад

Chris, great video, I discovered one more thing that can go wrong besides the problems you mentioned. Apparently, the chemicals from dryer sheets can build up on the moisture sensor and the burner doesn't turn on. The dryer worked in timed dry but not in auto moisture sensing. Thanks for making everything clear and understandable.

@chrisfix 11 лет назад

Did you check all of the pieces shown in both videos? Some are fuses, some are thermostats, one is the ignition... Is the ignition lighting up (orange glow)?

@Frank-Reynolds 10 лет назад

Thanks Chris for the dryer fix walkthrough. I was having a problem with my dryer not heating and after checking out your first video and everything checked out, I watched this one. After noticing it wasn't glowing, I checked the continuity on the ignitor and there wasn't any. After taking it out I noticed the element that heats up was cracked. Oh, and my dryer is a Whirlpool but all the elements should be about the same on any gas dryer like this. Thanks again, man.

@chrisfix 10 лет назад

No problem! Glad the video helped you fix your dryer! Remember to give the video a thumbs up!

@chrisfix 10 лет назад

Did you test everything with the ohm-meter like I showed in both part 1 and 2 of my videos?

@yeahitworks 11 лет назад

thanks for the response. Yeah, I tested it last night, and after an hour testing all the thermostat and fuses, found out that the hi-limit thermostat, would open at around 170F (too early, should be 205F), and then will close at round 80F, then gas cycles again, just takes time, took about every 8-10mins. I put a jumper, to confirm, and the gas stays on. New thermostat is on its way. I though it was was the solenoid to, I'm glad I did tested each sensors. Thanks! I

@TomGlander 7 лет назад

I paid a guy $180 to replace the exact solenoids you show in the video. I watched part 1 of this video, and ruled out problems with the part. I failed to watch this video, and called a repair dude. That was a mistake. I saw the price on the solenoids he used--$24 for both of them. DANG. Watch all the video parts. I could have saved some serious coin!! The upside is that we have a working dryer again, and it was still less expensive than a new dryer. Thanks for making this video, we need to start fixing things instead of throwing them away. Strong work!

@denlea5 2 года назад

Thank you so much for this! Everything checked out,but the igniter was reading 160ohm. It seems according to Kenmores site the igniter should read between 50 & 400! I ordered a new one for $14 and it now works! I was lucky to find a small open end wrench as I could not fit a socket, nor had room for a driver!

@DIYSalvageGuy Год назад

The man fixes my cars and my dryers. Always great content!

@neildeb3554 2 года назад

Fantastic videos. Fixed dryer in 2 hours. Saved buying a new dryer. Thanks

@mrgecko74 10 лет назад

Your video lead me to my solution. My dryer would dry clothes for the first 5 mins and then not heat anymore. The igniter would glow and the solenoids would "click" but no gas was released. The solenoids metered ok on my fluke, but I decided to order them and replace. Part # 279834. After S&H it was about $16 to fix. Dryer good as new again!

@chrisfix 10 лет назад

Yep, Walmart has a decent one for around $15. Harbor Freight gives them away with any purchase if you have that coupon.

@chrisfix 10 лет назад

Good luck and let me know how it works!

@FinancialBasicsMastery-tb8rk 19 дней назад

Thanks Chris. Learnt more about Troubleshooting than in my years in College. 😂😂😂😂

@patrickminns8814 10 лет назад

Outstanding information. I completed all of the trouble shooting steps from the first video and found continuity tests to be in good working order. Now I am moving on to the front of the dryer. I can see that the heating element is getting red hot but only once did I hear the click attributable with a functioning gas solenoid when I turned the control knob to the highest temperature setting. After hearing it click on once, it never repeated the performance and hence, I believe we have our culprit. I am going to replace it and we can see if it works! Really awesome video, both the first and this one because while I am an avid do-it-yourself type, the lack of frequency in performing dryer repairs means that I basically must reinvent the wheel, so to speak, each time I perform repairs on our washers and dryers. Your videos have helped accomplish that feat in remarkably short order because they are short but very effective. Nicely done sir!

@chrisfix 10 лет назад

Patrick Minns Thank you Patrick. I would say it is your solenoids so let me know if that fixes it! Thanks for the feedback!

@guycoombes 10 лет назад

So brilliantly simple the way you explain things.

@mikeg8028 6 лет назад

Good video. Unfortunately, none of these things fixed the problem with my dryer. In case anyone else has a similar problem, my issue was that the heater relay was bad. The dryer was not heating, the igniter wasn't lighting up, but all the components seemed fine. Replaced the heater relay and I'm back in business.

@bradleyvandeventer2844 10 лет назад

Thanks a ton, sir, for this tutorial! $25 to fix my dryer. I just needed to match the solenoids with the model number and good to go. Save money and learn something in the process. Respect.

@chrisfix 10 лет назад

SWEET! Glad the video was helpful! Remember to give the video a "thumbs up" (it helps me out, Thanks)!

@chazfarote 9 лет назад

Dude thank you so much! My dryer's problem was the solenoids, got them ebay for $8 and now it's rocking like a champ. I even took the opportunity to clean the heck out of it :) Thanks again!

@chrisfix 9 лет назад

Carlos Zelaya No problem Carlos! I love hearing success stories! Glad you got the dryer working again!

@javaughn92 5 лет назад

Video is great. even 6 years later. gave me exactly what i needed

@j0d335 10 лет назад

Thanks, Chris! Great explanation. You really helped me troubleshoot & find that my solenoids were bad. Everything is working well, now. Much appreciation!

@chrisfix 10 лет назад

Awesome! Glad the video helped and you got your dryer working!!!

@adamt7598 10 лет назад

Thank you! There were no issues after your first video. Everything checked out. Based on your troubleshooting, I was able to determine that it was a bad solenoid. FYI: change the settings on your DMM to make sure they are good.

@chrisfix 10 лет назад

What is the DMM?

@bgob1456 5 лет назад

@@chrisfix Digital Multi Meter

@chrisfix 10 лет назад

Thanks! Give the video a thumbs up, it helps me out!

@mrsurfah6770 10 лет назад

Chris, You da Man! Great video, saved me some bucks! Thanks for the straight to the point, no stupid music, no non sense approach to changing out my Kenmore 400 series gas dryer's coils. My dryer is up and running like a champ. Couldn't have done it without this video! ~Aloha

@chrisfix 10 лет назад

Awesome! That is the goal of my videos! Glad you liked the video and you fixed your dryer!

@ivannavia5476 2 года назад

My Boi went from helping me change my rotors to fix my dryer. Love you man.!!!

@chrisfix 10 лет назад

Yea, the solenoids are also called coils. Thanks for the comment!

@BlueDV 8 лет назад

Boom, everything is fixed. Good thing was everything was still working. My problem was probably a loose or corroded connector. Unplugging everything probably fixed it. I did the front and rear which also gave me time to vacuum all the lint and collect the loose change and paper clips. Dryer fires are very common and it's a great idea to keep the vents clean.

@lowpower9 6 лет назад

Followed the video and checked different components, went out and purchased the thermal fuse and WA-LA I got a flame. Thanks for the informative video

@chrisfix 11 лет назад

Sounds like a thermostat is causing the heat to shut off because it is getting too hot, or your solenoids wont stay open for some reason. Have you cleaned the exhaust out?

@callmebackfriday2 4 года назад

Thanks for the video. I have an old dryer (Montgomery Ward - green in color) and it has this problem but at that time, ChrisFix still in 6th grade. I throw that dryer away but what a Shame, all i need is the 279834 Dryer Gas Valve Ignition Solenoid which cost $5 - $10.

@mikeanderson4795 8 лет назад

Awesome video. simple and straight to the point. My dryer would fire twice but then stop at the third time. I followed the steps in the back panel everything checked out. Moved to the front. I tested the coils for continuity, they seemed ok. I got two new coils from a local store and the guy told me that the coils could check ok but still be bad. He said that the coils will get hot from the burner and go open but then after cooling close back up to normal.This was my fix. Thanks to this video by ChrisFix. Side note: this was a good thing because I was shocked at how much lint accumulated inside of the dryer. I had no idea because we clean the filter before each cycle. I will clean my dryer inside at least every couple of years from now on.

@chrisfix 8 лет назад

+Mike Anderson Awesome Mike! I am glad the video was helpful!!!

@TammieSherk Год назад

thank you so much for the helpful video! I thought it would be too complicated for me to try, but after watching, I am going to give it a try!

@thomasreddick5908 7 лет назад

Chris, that third piece of equipment is called a flame sensor. Although it does seem to act like a thermostat. I have a thermostat on the tube that surrounds the flame along with a thermostat and a thermistor on the out going vent from the blower. Very good video as always I enjoy them all.

@christravers6760 9 лет назад

Thanks Chris, just fixed my dryer for $24 worth of parts. YOU ROCK!!!

@chrisfix 9 лет назад

Chris Travers AWESOME! Glad the video was helpful Chris!

@rohornback 8 лет назад

Thank you for putting this video together. In the past I had to replace the sensors. However this time I think it is the solenoid. You saved me so much time.

@chrisfix 8 лет назад

+Richard Hornback Awesome! Glad the video was helpful!

@ds2227 9 лет назад

Thanks! I replaced my solenoids yesterday and the dryer works perfectly again! Your video was a big help! Have a great day!

@chrisfix 9 лет назад

ds2227 Great! Glad the video was helpful!

@avinashseedial5583 2 года назад

Thanks again brother. I really thought I was finally going to see your face. From Trinidad 🇹🇹 with great respect.

@tkeeg 7 лет назад

A very nice addition to your part 1 video. Thanks again for sharing this!

@SASUKE1THE1AVENGER 11 лет назад

This video is very good! Gave me the confidence to fix my dryer myself with ease!!

@harjadirusli 10 лет назад

very practical to follow, I watched the 1st video last night and test all the thermostat and the fuse are all good. Hope the gas solenoid/coil that are bad! Thanks a bunch!

@chrisfix 10 лет назад

No prob! Glad the video helped!!!

@chrisfix 10 лет назад

Ok good. So replace the ignitor and let me know if that solves the problem. If not then check out the thermostats and the thermal fuse on the back with the ohm meter. If you have any questions just comment! Good luck!

@chrisfix 10 лет назад

Did you test the thermostats like how I did it in the video? If you do exactly what I did in the part 1 video and part 2 video (any order), you will find what is wrong.

@thenionx 4 года назад

Thanks for the vid. I followed and was able to solve the issue. DIY channels like this are an invaluable tool to the community. Thanks again

@chrisfix 4 года назад

Glad you learned something!

@daverudy7387 8 лет назад

I had absolutely no idea what I was doing, I tried other wed sites but they were to confusing, this was extremely helpful and easy!!!!!

@chrisfix 8 лет назад

+Dave Rudy Awesome Dave! Glad it was helpful!

@MrLostcause1983 10 лет назад

Thank you Chris, I just got the solenoids earlier today, popped them in and the dryer's working fine.

@chrisfix 10 лет назад

No problem! This is what I like to hear!

@johnyount8936 7 лет назад

Watched your video. Pulled out my dryer; cleaned and dismantled it. Narrowed the potential problem down to the "thermal fuse." (At least that's what the bag containing the new part is labeled). Purchased the part for $10 dollars. Replaced the part and the dryer is well, drying. Your video saved me a minimum of $80 for the repairman house call. I'm certain it would have been well over a hundred bucks. Thank you!!!!

@chrisfix 7 лет назад

That is awesome! Glad the video was helpful!

@jaimenbrunson1652 7 лет назад

ChrisFix thank you that made my day and it fixed my gas dryer

@sammyl5846 7 лет назад

John Yount I

@chrisfix 10 лет назад

Dang that is a tough one. Did you check everything like in the video? If not, I would do that because you will most likely find your problem. Check the resistance of your igniter. It should read 50 to400 ohms.

@frankventura2600 10 лет назад

Thanks a lot for the tip on how to fix the Gas Dryer... This came really handy, I was able to fix our gas dryer within 20 minutes after looking at your video... Very Nice.

@chrisfix 10 лет назад

Great! Glad the video helped you fix your dryer!

@fryboyski 10 лет назад

You saved me $400-16.66= $383.34 !!! Thanks for the very helpful video. I have the Kenmore 500 series gas dryer. I had the glow but there wasn't a click or ignition. Twas a bad solenoid, easy to change took 20 minutes total to finish thanks to your video. Can't say thank you enough. Take care

@chrisfix 10 лет назад

AWESOME! Happy to hear I helped save you big bucks!

@fryboyski 10 лет назад

Well darn it, I guess I celebrated too soon. Went to go use my newly fixed dryer and now it won't turn on. Any suggestions?

@fryboyski 10 лет назад

Nevermind, it was self sabatage lol. After putting it together the first time I didn't get one of the fasteners on front panel secured right. I took apart and didn't plug in the door switch upon putting together last time. Problem resolved !

@chrisfix 10 лет назад

Haha, good! Glad you figured it out!

@ShowcaseLandscapes 7 лет назад

I have used Pt 1 & Pt 2 twice, once for my own dryer and one for a lawn customer ( I looked like a god!!! in her eyes) Just sent it to a deaf friend and she was able to follow your video okay.