sir windows cannot complete installation in safe mode. To continue installation windows,restart the computer but I restarted my computer no changes what can i do now please help me
Is that an * between COPY and c/WINDOWS...? And do you need to put a space before and after whatever that * Is? I'm stuck at this part and it says system cannot find the path specified. Pls reply fast.
I was tryna not shit myself cuz my laptop started making a weird noise. Last time my laptop made that noise it completely shut off and never turned on again so I got this one. But I immediately searched up how to fix it and turned out I didn’t need it. My laptop just restarted and now it’s on the login screen😂I hope it’s all good
Sad story :( Addit: I'll finish writing my motovation lettre and apply for this scholarship that I wait it for months before deadline. Blue screen of windows : hi :(
Thank you. I must say that after having dealt with windows for decades this has to be BY far the BEST ADVICE I have ever received. I wish I had known this technique so many times before I completely reloading windows. Come on Microsoft...
My PC keeps restarting in a loop after saying “Your PC ran into a problem …”. The Automatic Repair window wont show up. what should I do? If this happened to you, how long did you wait for the Automatic Repair window to show up?? Please answer. 1:34
@@suryatejess Hey, u can just plug your pc in and then long press the turn on /turn off button of your pc and continously press it Hope it shows auto repair
@@zaidaltayar1712 no theres actually you process you need to do. In simple terms, it is called like installing a new windows again. Its like a manual factory reset. In most cases you gon lose all your data. If you’re laptop is not so secured, chances are that you gonna get get your files back. But i guess youll lose the warranty if you do it on your own. Anyway its not an issue to worry about. You can do it on your own too. Youll just need another laptop and a pendrive.
@@suryatejess If I withdraw the memory card and make it external and connect it to a second computer, will my data be seen in the rest of the partition?
Literally saved my life.. working on a major project while this happened, and I thought I was screwed.. Thank you soo much for the video.. Even while watching the video, I was kinda scared if I will lose the files , thankfully nothing was deleted 😀😁.. can't thank you enough 😀😀
What to do if no such names are shown after config\RegBack (at 5.15) In my pc, it's only two files, with one dot(.) and the other one with two dots(..)
@@FalconPUNCHXXX same, i got mine a couple weeks ago, might have been because i just overclocked my cpu, or that i undervolted my gpu. i just restored them back to normal in case thats why
Thanks for this video. It did not help me personally, but I learnt something new from it; particularly restoring RegBack. Had exact problem. After reapplying thermal fluid to my gtx 970 gfx card, windows would crash at startup and couldn't get to the user selection screen. Tried everything from the suggestions in this video including other suggestions from other websites and microsoft. Even tried to reinstall windows with clean install, but still couldn't get windows to startup. Eventually, it turned out that I had reversed the cable connection on my gfx card. I reverted the connection to the original settings and now windows is working again. I have to reinstall many programmes again, but at least the pc and windows work. Make sure all hardware settings and connections are as they were when windows was working correctly if you have made changes to any hardware, before trying anything else. Thanks again for the video.
Watching now! This is what really happens on the desktop I have with me. The problem is, this is from our company, therefore, I have no option to access eveything in it! 😥
If you are not able to get into the Advanced Boot Menu option, and your system is in the continuous restart loop then follow the process shown in this video to disable the Automatic Restart on System Failure : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RV276UjPx9o.html Once your system gets out of this Restart Loop, then you can follow the process shown in the video to get resolve the Blue Screen Error. Hope this will help for all those who were facing issue to get into the Advanced boot menu. Thanks.
Hello sir. . My name is Hardik.. I am facing the same issue you mentioned and nothing is working except command prompt. .. i entered C:\ and entered cd windows\system32 also entered cd windows it gives error as "The system cannot find the path specified". also like your screen my default is coming to X:\windows\system32 can you pls help me out. . i will be highly oblige
Hardik Gor many times the drive letter for your operating system just gets changed. So you need to first find out which drive is belongs to your operating system. And then follow the process shown in the video. In order to identify which drive is operating system, just use hit and try method. See the contents of each drives by simply typing "DIR D:\", or "DIR E:\" or continue changing drive letter until you find the operating system drive. Let me know if that helps. Thanks. :)
Thank you, thank you, thank you!!!! You have saved my PC and my sanity. After 1 hour of trying and at the same time searching with my laptop for solutions to the problem I stumbled over your video. I can not put into words how grateful I am. Thanks again!
My PC keeps restarting in a loop after saying “Your PC ran into a problem …”. The Automatic Repair window wont show up. what should I do? If this happened to you, how long did you wait for the Automatic Repair window to show up?? Please answer. 1:34
Can someone help me? I did everything he was saying and didn't see the last command he entered before turning off the computer. I heard him say "escape"😳 help plssss
I fixed this issue by unplugging everything connected to the laptop such as usb receiver or charger cable then pressed the power button to shutdown the laptop. When I opened the laptop it worked fine and this issue was gone. Before this issue started, I had trouble with my WIFI. By which I could not find anything related to WIFI, so I had to reset the drivers by holding down the power button for 60 seconds which solved the WIFI Problem forever but started this issue. Windows 10 is buggy, I never had any problems like this with Windows 8 or 7.
Why everyone system is having same problem at the same time? As per the video steps my laptop shows The system cannot find the path specific. What do I do?
If you are getting this problem and you have followed countless vids and instructions from the internet like I did and you can’t even reset your pc because it’s says it can’t what I done was restored windows with a usb that I kept the windows installer I first set my pc up with
More than 20 minutes have passed I'm still stuck on that blue screen showing 0% complete. No buttons working,what shall I do? How are choosing options!!!! Nothing is working on my laptop
Bad Wolf Bailey I tried but get same problem ...so I tried another path e: its works for me ..so first thing u have to do is change the path from C: to another like E: or D: and then keep doing things in this video
@@darkenknight25 I have tried reinstalling windows 10 from USB. All went fine. Used the laptop for 10mins and the "your pc ran into..." popped again and now am back with the same problems...ppfftt
@@JawidSmart so make sure everything your charger internal hardware of your device and your windows is activated if any other problem still goes on remind me
@@darkenknight25 Changed my hdd and ssd. Charger/battery checked. Its still does this after about 20mins of usage after a fresh windows install. Maybe the RAM is faulty or the motherboard/processor itself. Gonna send it to a friend to test the RAM separately just to get an idea. Thanks for your concern bro
@@JawidSmart no worries man thanks it helped you out but i want your concern also shall i start a you tube channel because i have IT knowledge and i am 13 shall i make a channel about these concerns
When i was on " C:\Windows\System32\config\RegBack>DIR" you said there were 5 files inder, and i looked there were ZERO nothing as nothing there were no default,sam and etc. There are no 5 rows here. What im gonna do now?
Thank you brother, you have earned a subscriber, I will definitely share as much of your video I can. Friends If you get any kind of problem don't worry about the losses that you are going get from that problem just think that if you solve this problem you are gonna learn from it.
I would have seen your videos before resetting my pc..😢 anyway its my new pc, so nothing hard for me to reset. Nice one with good explanation, even a kid understands your concept 👍 All the best tech savior ☺️
Hi. I have followed all your steps but after restarting the machine, the blue screen came back with the Title Automatic Repair. Can you help again please?
I cant eaven turn my laptop to see the screen he is just restarting it and foes it again and again angain again again and i saw at you there was 0% that wasnt on my laptop.....whats wrong
Thanks! That really helped. Although it started my PC, I wanted to know how it happened in the first place. It might be helpful to avoid it next time it happens.
Reem Salah Glad to hear that it helped you. Thanks for commenting. Keep sharing the video and subscribe to the channel to get the future updates. Thanks :)
I recommend you to *cyber_security_hacker1* on IG. He's going to help you fix the problem, he helped to fix mine he's a genius I recommend him as one of the best
I followed all the steps but when i turned off my laptop and started it again it didn't started normally it again when to repair screen Please tell me what should i do ?
@@nadzuki well that method didn't work on my lapi but my lapi is working properly!😅 What I've searched and came to know about this issue is that let your lapi be like this for 1-2days, the problem will automatically be resolved. The same happens with my frnds lapi and it was automatically resolved. So let it be!
Winston B. Patterson (The Crimson King) Glad to hear that it helped you. Please share the video and subscribe to the channel to get the future updates. Thanks :)
Young Mimbo Sure welcome. Thanks for your great Compliment. Glad it helped you. Please share the video and subscribe to the channel to get the future updates. Thanks :)
what is the last command he typed? i typed accept but it says accept is not recognized as an internal or external command, operable program or batch file
Crazylemon Plays Sure welcome. Glad to hear that it helped you. Please share the video and subscribe to the channel to get the future updates. Thanks :)
My laptop went through this exactly but I missed the chance to fix the registry. It went frozen during one of the multiple restart, did not even have the error message again. What can I do?
That was awesome. It worked the first time I tried it. I have never used the command line interface before and never wanted to. However, I followed your instructions to the letter, and it worked great! Thank you soooo much! Big subscribe from me!
My PC keeps restarting in a loop after saying “Your PC ran into a problem …”. The Automatic Repair window wont show up. what should I do? If this happened to you, how long did you wait for the Automatic Repair window to show up?? Please answer. 1:34
Please help!!!😭😭😭. Mine keep restarting after the blue screen and not showing the "Automatic repair" but when i use it for 30 minutes untill one hour, it will having the same problem again
I need help, for me it doesn't show Default, Sam, Security, Software, and system! please helppppppp, it just shows dots and then 0 bytes, I really need help, I need to use my computer for an interview on saturday
Also same problem but mistakely when my computer is restart i push the button and turn off the laptop and now laptop still with black screen how to resolve
i did everything but when i re start the computer the problem still there. what if the reason is.... because the anti virus software blocked the restore or reconfiguration?
@@jantheking7028 all I know is the whole problem is solved this way Just shut down the system for at least 2 consecutive days Then start It might start windows normally or you have to bother for wandering in between options and restart whenever it suggests .these restart attempts might be successful I have had this problem for number of times and the solution that I have concluded is simple It will start somehow ...but after keeping it shut down for at least 2 days ...then try ur options ...high probablity that I will start
@@arslanameen4429 What brand of computer did u have this issue for? Also, after you shut down your computer for 2 days, did this problem ever occur again?
@@jantheking7028 yes it occurs again ...either when i update windows or drivers , or when computer starts functioning slow . my laptop is dell core i 3