Тёмный
No video :(

How to fix your sticky/shiny/melting Dashboard - Toyota Camry, Lexus, Nissan, Mazda, Kia & Subaru 

3d formulations
Подписаться 544
Просмотров 192 тыс.
50% 1

The Sticky Dash Fix is an effective, easy and permanent two-step, do-it-yourself Dashboard repair solution. stickydashfix.com
Step 1. A Surface Cleaner, formulated to quickly and easily remove sticky plasticizers, dirt and debris, is applied to prepare the Dashboard surface.
Step 2. A Surface Coating is applied which bonds to the Dashboard surface to form a thin, yet strong and flexible membrane, which after a number of light coats, effectively seals the surface.

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 198   
@marthashaffer8295
@marthashaffer8295 3 года назад
My daughter transformed the dashboard on her camry with this and she is so happy!
@3dformulations383
@3dformulations383 3 года назад
Thanks Martha! that's great to hear. Keep an eye on it over time - some of the Camry dashboards can be particularly bad in the areas closest to the windscreen and we recommend retaining the left-over Surface Coating in case any touch-ups are required in the future to completely overcome the defect. Best Regards, SDF.
@ColtonWeeks17
@ColtonWeeks17 Месяц назад
Does this stuff really work? My girlfriend has an 08 Camry with this problem and I'm thinking about getting it for her.
@robertsiwicki4597
@robertsiwicki4597 7 месяцев назад
Purchased this a few months ago for a 2007 Camry with a black dash. My dash would get very soft if I left it out in the direct sun but not sticky or have dirt stick to it and was always easy to clean. I park inside a garage for work and home so it’s not out much in direct sunlight and heat but I live here in Miami. So I did this as preventative maintenance before it got worse and therefore was not easy mentally to try and fix something that really was not fully broken. Used foam brushes but they left streaky marks after 3 coats. Next day I got a roller brush. Night and day difference how easily it applies with a roller brush and absolutely no streaking. It’s a dead on match to the original trim. Fairy easy to apply but only need fairly thin coats as in some places I would see it pool like somehow it was growing pools but not in areas where paint might drain too. So there it is necessary after applying with the roller brush to smooth out the areas it was pooling. Very impressed with the feel and look of the finished product. Ya all chemical engineers did a GREAT job!!! Thanks
@3dformulations383
@3dformulations383 7 месяцев назад
Hi Robert, Thank you very much - not many people take the time to share their feedback, it's very much appreciated!
@3dformulations383
@3dformulations383 3 года назад
Thanks for your order. We are more concerned with applying the Surface Coating in direct sunlight. The curved glass sections of the windscreen can magnify direct sunlight and cause the Surface Coating to dry too quickly. The product is water-based and can be thinned with water (10-20%) to slow drying time.
@ainsley7662
@ainsley7662 Год назад
The product, not only can fix a sticky dash but if your dash is a little tired and needs a refresh, well, this product will make it look brand new, just amazing, I even had a few small hairline cracks, not that the product recommends being used to fix this but it sure did, a terrific result
@ainsley7662
@ainsley7662 Год назад
WoW, what a product, so easy to use / apply and incredible results, I had thought my car was a goner with the dash in such a sticky state, this product just worked, after the first thin coat, and after three more it was back to a brand new standard, wow, just awesome
@Lonbites
@Lonbites Год назад
Are you a real customer or a paid one? I want something to really fix my problems and want a product that really works. So your honesty would be appreciated
@ainsley7662
@ainsley7662 Год назад
@lonbites965 I'm a real customer, product works a treat, easy to apply and great results
@Lonbites
@Lonbites Год назад
@@ainsley7662 how many coats did you have to do? And how long in between time to add another coat?
@ainsley7662
@ainsley7662 Год назад
@lonbites965 3 or 4 coats, applied when touch dry ie 10 minutes or so
@Lonbites
@Lonbites Год назад
@@ainsley7662 so buying one product should be enough for my Camry?
@kelvincaro6451
@kelvincaro6451 3 года назад
Just came in today 28 days to be exact but what u expect when it’s coming to PhX Arizona product can’t be purchase anywhere else but there site. Just waiting to buy a filler to get this done perfect 👌🏽
@3dformulations383
@3dformulations383 3 года назад
Thanks Kelvin, Any filler should work fine, so long as it's water-based and flexible. Put down a light coat or two before you apply the filler as this will provide a chemical resistant layer between the dashboard and the filler. You can also mix some Surface Coating with the filler to improve the flexibility, chemical resistance and compatibility of the filler.
@justinp.3256
@justinp.3256 3 года назад
1:25 what is being used to fill gouges and scratches? Is it included in the kit? I don't see a filler listed in the kit, or did I miss it? I have quite a few to fill, so I'll need to take care of them before applying the coating
@MrTikibars
@MrTikibars 2 года назад
Still wondering this myself
@renoleevans
@renoleevans 2 года назад
Sticky Dash Fix - Filler/Surface Stabilizer which uses the same resin-system as the Surface Coating to ensure compatibility and flexibility.
@theresak4343
@theresak4343 Год назад
The Sticky Dash Fix - Filler/Surface Stabilizer is not included in the pack; I just looked it up on their website; the stabilizer is $9.95 for a 50 ml/3.52 fl oz bottle.
@PapillonOne
@PapillonOne 2 года назад
1:25 what is being used to fill gouges and scratches? Is it included in the kit? I don't see a filler listed in the kit, or did I miss it? I have quite a few to fill, so I'll need to know this before I move forward. Thank you.
@zakariyahzalend1264
@zakariyahzalend1264 Месяц назад
hey , did u find out, iam sorta confused as well
@PapillonOne
@PapillonOne Месяц назад
@@zakariyahzalend1264 Nope, no answer!
@NorIsFlop
@NorIsFlop 3 года назад
where will i be looking to buy this? my 14 year old camry decided its dash wants to crack up and be sticky
@rabramMD17
@rabramMD17 3 года назад
Is there a preferred temperature outside to perform the fix? (Just ordered some)
@addanametocontinue
@addanametocontinue Год назад
I used this on my car Lexus. Ended up using 1.5 bottles of the stuff to finally get rid of the stickiness. Not sure if I just needed that may layers or if I didn't apply enough layers in a single go with the fist bottle and that allowed oil to permeate through the layers, requiring further application. When I got the 2nd bottle, I put on 3 layers over the course of 2 hours and that did the trick.
@jjgriffiths723
@jjgriffiths723 2 месяца назад
did the surface show paint strokes and was the coverage even? i want to do this to my daighters RX. also was it shiny and reflective or about normal?
@uberredskn
@uberredskn Год назад
Turn your demist on and apply talc. Buy a custom made dash mat online. Problem solved. I live in the Pilbara where outside temperatures can reach 46c so inside is a furnace. I did this fix 3 yrs ago and the dash under the mat is still smooth.
@winthanonh
@winthanonh Год назад
Toyota should have a recall on this. My 2011 Camry has this problem. It’s a safety hazard. Even my 1995 Acura doesn’t have this problem.
@angelinajack
@angelinajack Год назад
Now that’s it’s been 3 years how does it look on this current car now?
@theresak4343
@theresak4343 Год назад
Many people are asking this in the comments. The Sticky Dash Fix - Filler/Surface Stabilizer that fills in the cracks is not included in the pack, which is $49.95 on the website; the stabilizer is $9.95 for a 50 ml/3.52 fl oz bottle.
@Jioaa1988
@Jioaa1988 11 месяцев назад
Thank you, I can’t believe it doesn’t already come with the kit or offered as a bundle when purchasing the kit.
@theresak4343
@theresak4343 11 месяцев назад
@@Jioaa1988 I just bought the kit, along with the stabilizer; as soon as I apply it, I'll leave a review here.
@JoseAlvarado-nk5rb
@JoseAlvarado-nk5rb 10 месяцев назад
@@theresak4343update??
@theresak4343
@theresak4343 10 месяцев назад
@@JoseAlvarado-nk5rb I just applied this product on Thursday; the stickiness is gone, and most importantly, the glare is gone, I was relieved; however, the Sticky Dash Filler that I bought separately didn't work as I expected; I tried to apply with my finger, with a brush, and with a dabber, and every time I wiped a bit, it didn't fill the small holes on the dash; but you know what, that is really not important to me, the glare and stickiness were the reasons I bought this product; I recommend it for anyone with this problem.
@WXYZ9998
@WXYZ9998 5 месяцев назад
@@theresak4343?
@butchsison8751
@butchsison8751 Год назад
How to order?
@ecahatch
@ecahatch Год назад
what is the white product you used to fill the gouges and scratches?
@hesomshirazi-garner2428
@hesomshirazi-garner2428 Год назад
Myself I used SUGRU glue putty
@cfcamacho80
@cfcamacho80 3 года назад
I just saw your video on how to clean and fix the cracks in these type of dashboards. I have a Nissan Altima 2010 and throughout time, I've been seeing these cracks along the trim lines and on the passenger side. I live in a city where hot weather is very common. And usually the surface feels sticky to when I try to wipe off the dust n debris. The fibers from the cloth stick. Will this is stuff help to fill the cracks and not make the surface so sticky? I'm guessing I have to get a filler to fill in the cracks first before applying this stuff. Where can I find fillers? Sorry if I'm asking too much I just don't know much about this kind of stuff.
@teamskdm1
@teamskdm1 3 года назад
look on ebay for a plastic altima dash cap. theyre like 250$ but they go over the existing dash and make it look factory new again and wont crack like the original.
@stewartfloresta9085
@stewartfloresta9085 23 дня назад
The cleaner doesn't remove the stickiness after hours...what should I do? Can I coat over the stickiness? It's a bit better than before but still there
@3dformulations383
@3dformulations383 23 дня назад
Hi Stewart, Thanks for your comment/question. As per the instructions, the Surface Cleaner is formulated to help remove dirt & debris from the sticky dashboard surface - only. The Surface Coating needs to be applied after using the Surface Cleaner, to seal over the stickiness. Don't attempt to remove the sticky "compound" completely or you could further damage or smooth the texture of the dashboard material.
@Terrific10byTna
@Terrific10byTna 4 года назад
DAMN!! Wish I would have had this for my 2007 Altima's dash
@3dformulations383
@3dformulations383 4 года назад
It's never too late!
@thisqueenieisunique2896
@thisqueenieisunique2896 3 года назад
I’m gonna try this with my 2009 Nissan Altima dash it needs it
@albertobautista7959
@albertobautista7959 2 года назад
I gonna try with my nissan altima 2008, but I want to be sure if it works..
@blue52851
@blue52851 5 месяцев назад
how do you keep it clean after applying? Do u just use the regular dash cleaners?
@luisaalbarran1401
@luisaalbarran1401 3 года назад
I ordered this product, the cleanser worked very well but the color is way too dark. I have a medium grey dashboard and I received either black or very dark grey. There aren't any other choices on the website. So I'm back to shopping around.
@3dformulations383
@3dformulations383 3 года назад
Hi Luisa, That's very easily fixed - please email your Order# to: derek@3dformulations.com.au and I'll have another kit sent out. Your dashboard color may not have been available at the time you ordered. We are constantly adding more makes, models and colors to our portfolio. Best Regards, Derek - SDF
@luisaalbarran1401
@luisaalbarran1401 3 года назад
@@3dformulations383 Thank you for your prompt reply. I emailed the information requested.
@justaman3817
@justaman3817 Год назад
What was the verdict?
@binayaktimalsena680
@binayaktimalsena680 Год назад
Just wondering any link to buy this product thank you
@3dformulations383
@3dformulations383 Год назад
Hi Binayak, our website is: stickydashfix.com Regards, the SDF Team
@celestemastrocola8096
@celestemastrocola8096 3 года назад
I know of 4 people that didn’t have an issue with there dashboard until after the time period allowed 2017. It all started in 2018 and 2019 . There got to be a solution to the sticky cracking dashboard . Does anyone have a 3D printer?
@marlenbatista9642
@marlenbatista9642 3 года назад
I have a 2011 camry bought off the lot at 0 miles on November of 2010 and my dashboard melted!
@lmanders2
@lmanders2 2 года назад
@@marlenbatista9642 same here, bought brand new in 2010 Camry, dash is sticky and shiny as all hell.
@theresak4343
@theresak4343 Год назад
My 2010 Camry has this problem.
@jbplays7302
@jbplays7302 11 месяцев назад
My 2011 Toyota Camry has this same sticky surface. Will this product fix the problem?
@EEmasigala
@EEmasigala 2 года назад
The surface is way too shiny, it's becoming a hazard to drive. How do you remove it? I've tried traditional products and it gets sticky trapping lint. It looks worse now.
@3dformulations383
@3dformulations383 2 года назад
Hi Miguel, You're not alone, there are millions of vehicles from a number of manufacturers, affected by the sticky dashboard defect. Please find more information about our products at: stickydashfic.com Regards, The SDF Team.
@garypitzer8729
@garypitzer8729 Год назад
Where can I buy this stuff at? I didn't see any links in the description.
@3dformulations383
@3dformulations383 Год назад
Hi Gary, Our website store is: stickydashfix.com
@Avinash-zj1yk
@Avinash-zj1yk 3 года назад
I am from India, what do I use when our dashboard is melt on the edge, your suggestion is more important.
@TomeiARC
@TomeiARC 5 месяцев назад
Bob's and vagene
@baileythompson1150
@baileythompson1150 3 года назад
What did you use to fill the holes?
@egroh76
@egroh76 3 года назад
prob just spackle
@raechelle9219
@raechelle9219 Год назад
The dash still looks reflective 😢
@PeoplesloverIam
@PeoplesloverIam Год назад
Hi I can't find it in UAE
@seanh9488
@seanh9488 Год назад
Is it work ?
@Afrocow888
@Afrocow888 3 года назад
Saw a few comments on Facebook about shipping delay
@3dformulations383
@3dformulations383 3 года назад
Yes, there were delays last year during the beginning of the pandemic. Australia's international border was shut off to the rest of the world and there were very limited freight planes to and from Australia. Thankfully shipping times have greatly improved since then.
@damenainmaxwell680
@damenainmaxwell680 3 года назад
Is one kit enough to do the dashboard and door panels of my Lexus is250?
@3dformulations383
@3dformulations383 3 года назад
Hi Damenain, We offer the option to purchase an additional bottle of Surface Coating with your kit, should you need to treat your door trims too.
@zwimlil7731
@zwimlil7731 3 года назад
Is this work well for Lexus IS250? (2008)
@TheCachete33
@TheCachete33 4 года назад
What do you use to fill in the scratches
@3dformulations383
@3dformulations383 4 года назад
Thanks for your question! We recommend applying a few light coats first and then assess if it's worth attempting to fill any gouges, sometimes filling larger gouges can make the repair obvious, because it's difficult to match the dashboard texture. We don't recommend any particular hardware-store filler brand, so long as it's water-based and reasonably flexible. You could also try mixing the Surface Coating with a suitable filler to improve flexibility and compatibility of a filler. You are very welcome to send some pictures of your dashboard to our Product Developer, his email address is derek@3dformulations.com.au and he will give you an honest opinion of the results that you can expect in addition to any advice and tips.
@3dformulations383
@3dformulations383 4 года назад
We recommend applying a few light coats first and then assess if it's worth attempting to fill any gouges, sometimes filling larger gouges can make the repair obvious, because it's difficult to match the dashboard texture. We don't recommend any particular hardware-store filler brand, so long as it's water-based and reasonably flexible. You could also try mixing the Surface Coating with a suitable filler to improve flexibility and compatibility of a filler. You are very welcome to send some pictures of your dashboard to our Product Developer, his email address is derek@3dformulations.com.au and he will give you an honest opinion of the results that you can expect in addition to any advice and tips.
@arielish2923
@arielish2923 2 года назад
Do you ship to Argentina?
@shan59299
@shan59299 2 года назад
Hi how can I order the product in Qatar
@hoppas77
@hoppas77 2 года назад
HI, I only have a small area of stickiness, but my main concerns are the cracking around the seams of the dash. Will your product help with that or do you sell a product for this issue? Or do you know of one? I have a 2011 Nissan Altima. Thank you for your reply.
@3dformulations383
@3dformulations383 2 года назад
Thanks for your question. It sounds like the adhesive under the top material of your dashboard has mostly migrated downwards into the foam layer below - causing the top material to become brittle and crack as the dashboard expands and contracts. Due to demand, we now produce our own "Filler/Surface Stabilizer" product which uses the same resin-system as our Surface Coating to repair cracks.
@hoppas77
@hoppas77 2 года назад
@@3dformulations383 Wonderful! Thanks so much for the reply. What is your website?
@3dformulations383
@3dformulations383 2 года назад
@@hoppas77 Our website is: stickydashfix.com
@assholesplace
@assholesplace 2 года назад
@@3dformulations383 where do I order the filler as I don't see it on your website?
@3dformulations383
@3dformulations383 2 года назад
@@assholesplace Thanks for your message. We now include some of the Flexible Filler product with each kit. Best Regards, the SDF team.
@aquaredable
@aquaredable Год назад
Very impressive product.
@Gmcoss
@Gmcoss 3 года назад
Where do I get this product???
@karely73
@karely73 3 года назад
The weather is so hot, I went to buy some pizza and just put the box on top of it for about 5 min while I grabbed a bite and it melted…. 😞 now it has some holes, bumps and types of scratches lines because of the pizza box… So does it really work???
@3dformulations383
@3dformulations383 3 года назад
Hi Elyna, I'm sorry to hear about your experience, we have seen the same happen when lifting up dash mats that have stuck to the surface over time. We have developed our own flexible filler product which uses the same resin-system as our Surface Coating - this will help in restoring some of the damage. Regards, the SDF team.
@TheJimmyCobra
@TheJimmyCobra 4 года назад
Hi there! How can I reach you? I need do buy some of those, but I'm Brazil. Can you help me please?
@3dformulations383
@3dformulations383 3 года назад
Hello! Our website is: stickydashfix.com
@98_aus_burban82
@98_aus_burban82 Год назад
Can this be used of glove compartment cover or is it only for dashboard?
@3dformulations383
@3dformulations383 Год назад
Yes, it can. Often, the glove compartment and lower sections trim sections are made from the same materials as the dashboard.
@hassanhumud3950
@hassanhumud3950 2 года назад
can I order now ?
@hmorris
@hmorris 3 года назад
Would it be better to apply the protection in a circular motion to avoid streaks?
@3dformulations383
@3dformulations383 3 года назад
Hi Hayden, By demand, the Surface Coating is very matte and we recently discovered that using a damp micro-fiber cloth to wipe away any brush marks or streaks, while the Surface Coating is wet - works a treat. The micro-fiber cloth which is included in the kit can be rinsed out after being used to clean the dashboard surface and then used to wipe away any lines. Customers have also had great results using a small micro-fiber roller.
@user-uz6lj4id8l
@user-uz6lj4id8l 6 месяцев назад
Как заказать такой набор из России?
@MR-my5ff
@MR-my5ff Год назад
how can i order this?
@killzxo21
@killzxo21 3 года назад
My windshield is hard to see out of sometimes from this sticky shit. My dumbass left my car w out a windshield protector when I deployed and I’m gonna buy this product. I almost died the other day and that was the last straw. Fixing this ASAP w this product
@vanessawright5099
@vanessawright5099 3 года назад
Hi Francisco, I read the windshield protector would not help this manufactured defect. If all of your windows are closed, it will still get too hot inside the car. I think Toyota should back this problem and replace the dashboards. The glare is extremely dangerous. My 2008 Camry has had several recalls on it. Remember when the Toyota floor mats were getting stuck under the gas pedal. Several people lost their lives because of that defect. The company should be mandated to fix their defect.
@theresak4343
@theresak4343 Год назад
Don't blame your "dumbass." It takes longer than one deployment for this to happen. I know from experience.
@reyyap2776
@reyyap2776 2 года назад
Hi, i mazda 6 having the same problem on the dashboard which is melted. Anyway i can order in malaysia?
@3dformulations383
@3dformulations383 2 года назад
Hi Rey, Thanks for your message. Yes, we ship to Malaysia. Our website is: stickydashfix.com
@mikei.4096
@mikei.4096 4 года назад
What if your dash is only melting and doesn't have chips and holes Do i still need to use both products
@3dformulations383
@3dformulations383 4 года назад
Mike, I'm glad to hear that you're Dashboard isn't too bad. You won't need to use any filling product, but you will still need to use our Surface Cleaner before applying the Surface Coating.
@soccerjoker95
@soccerjoker95 4 года назад
I have an 08 Nissan Altima in need of this. Can't find the product for my car.
@3dformulations383
@3dformulations383 4 года назад
Thanks for your interest! We are building our color portfolio to include Nissan models. Please feel free to send some pictures of your dashboard to: derek@3dformulations.com.au and I will suggest a match and give you an honest opinion on the results you can expect to achieve. Regards, Derek Arnnarle - Product Developer.
@thegreatexchange4u
@thegreatexchange4u 3 года назад
Will this product also help reduce the glare (our dash, in a 2009 Toyota Camry Hybrid, is very shiny, and melted) ?
@3dformulations383
@3dformulations383 3 года назад
Hi Jesse, Yes the Surface Coating dries to the correct matte finish. You'll find lots more information at: stickydashfix.com
@rafaellima1405
@rafaellima1405 2 года назад
Good afternoon, will you deliver this product in Brazil?
@3dformulations383
@3dformulations383 2 года назад
Hi Rafael, Thanks for your message - yes we ship to Brazil.
@ryan8040
@ryan8040 3 года назад
I have applied..tried to avoid brush marks. No stick upon first application which is great but it does look terrible. Lots of brush strokes all over. Is there anyway to improve this??
@3dformulations383
@3dformulations383 3 года назад
Hi Ryan, There is a trouble-shooting section on the back of the instruction booklet. As per the instructions, patchiness and brush strokes can be corrected by using the flat side of the foam applicator brush to apply a light coat, over the patchy areas, using a "dabbing" motion. The foam brushes provided with The Kit are good for reaching into the areas closest to the windscreen, but can leave brush marks. It is also possible, that even after cleaning with the Surface Cleaner, there is residue left from another cleaner or past dashboard dressing or detailing product. The Surface Coating contains a nano-particle matting agent which rises to the surface to diffuse light and some contaminants such as silicone can cause the particles to disperse unevenly causing a patchy finish.
@josselynmachado8054
@josselynmachado8054 2 года назад
does it come in color grey ??
@3dformulations383
@3dformulations383 2 года назад
Yes Josselyn, We have many color variants available and continue to increase the color portfolio.
@ccfromnewzealand5109
@ccfromnewzealand5109 4 года назад
Hi there I am looking at one these kits for my lexus IS. Will the dash kit be enough for just the dash.. do I need to order another kit for treating door panels also? Thanks
@3dformulations383
@3dformulations383 4 года назад
Hi CC Nz, There is an option to purchase a subsidized extra bottle of the Surface Coating when you checkout. You can also dilute the Surface Coating by 10% with clean water, to make the product go further.
@elisexperience2915
@elisexperience2915 4 года назад
What are you using to fill holes and cuts. I just got my shipment today and I have no idea what to use to fill
@3dformulations383
@3dformulations383 4 года назад
Eli - Any flexible filler (preferably water-based) from a hardware store will work fine. Use the filler AFTER you have applied a few coats of the Surface Coating as this will provide a chemical-resistant barrier between the defective Dashboard surface and the filler. The Surface Coating is then applied over the top once the filler product has dried. By applying the Surface Coating first, you will also get a better perspective of the renewed appearance of the Dashboard and whether or not to fill any holes or scratches - we feel that sometimes filling some imperfections can draw more attention to them and "less is more".
@elisexperience2915
@elisexperience2915 4 года назад
3d formulations thank you!!!
@meirbeksafiyanov7894
@meirbeksafiyanov7894 4 года назад
Eli’s Experience how did it work out?
@caramellohoney
@caramellohoney 3 года назад
@@elisexperience2915 what did you use as a filler if you used one??
@elisexperience2915
@elisexperience2915 3 года назад
@@caramellohoney I have yet to get to this project yet I’m going to buy regular all weather caulking from Home Depot. Let it do it’s thing and dry and then paint it after
@AB-zh3dk
@AB-zh3dk 2 года назад
I just picked up a used camry with a sticky dash. Does his really work?
@joesou5376
@joesou5376 11 месяцев назад
2:31
@joesou5376
@joesou5376 11 месяцев назад
2:31
@TheBlooRayChannel
@TheBlooRayChannel 3 года назад
What product do you suggest when it comes to filling dashboard scratches and gouges?
@3dformulations383
@3dformulations383 3 года назад
We receive many requests for recommendations regarding a suitable flexible filler to fill cracks and gouges, so we decided recently to create our own. Our Flexible Filler product uses the same resin system as the Surface Coating so it is compatible, extremely flexible and provides a strong, chemical resistant barrier. But here's the kicker; it's color-matched like the Surface Coating and doesn't require sanding - once the filler is dry, rubbing alcohol can be used to "sculpt" the filler and wipe any excess product away.
@TheBlooRayChannel
@TheBlooRayChannel 3 года назад
@@3dformulations383 not entirely helpful since you don't have said product on sale.
@3dformulations383
@3dformulations383 3 года назад
@@TheBlooRayChannel We're just waiting on the jar labels to arrive from the printers.
@alkhaldi242
@alkhaldi242 3 года назад
How long the shipping will take to the U.S.?
@3dformulations383
@3dformulations383 3 года назад
Hi Mohammed, Shipping is still a bit slow due to Australia's border closure and limited outbound international flights, so allow 14 -18 days delivery to the U.S.
@gonzalezdiazblog8932
@gonzalezdiazblog8932 2 года назад
I will be ordering this product soon as my camry is a total disaster
@3dformulations383
@3dformulations383 2 года назад
Yes Rafael, the Toyota Camry and Nissan Altima dashboards seem to be the worst.
@gonzalezdiazblog8932
@gonzalezdiazblog8932 2 года назад
@@3dformulations383 thanks
@usmannafees5451
@usmannafees5451 3 года назад
Where do I order this product? Is it available in the USA?
@3dformulations383
@3dformulations383 3 года назад
Hi Usman, Our products are available at: stickydashfix.com For now, we ship internationally from Australia.
@C0nspiracyNy
@C0nspiracyNy 4 года назад
Will this work on my infiniti g35 coupe black dashboard? Your website only has a select few cars
@3dformulations383
@3dformulations383 4 года назад
Hi Kozmic, Yes the product will work on any dashboard. We now have the Nissan/Infiniti charcoal color available. You are very welcome to send some pictures of your dashboard to: derek@3dformulations.com.au and our Product Developer will give you his honest opinion of the results you can expect and any additional application tips or suggestions.
@C0nspiracyNy
@C0nspiracyNy 4 года назад
3d formulations how long is the shipping process, i got my confirmation number but thats it
@3dformulations383
@3dformulations383 4 года назад
@@C0nspiracyNy Hi Kozmic, If you have'nt received an update by now, please send me your order# to derek@3dformulations.com.au and I'll investigate.
@Eddycmj1
@Eddycmj1 4 года назад
Do you ship to Nigeria? I reside there
@3dformulations383
@3dformulations383 4 года назад
Yes, we ship world-wide.
@bbnCRLB
@bbnCRLB 3 года назад
Did you later order yours and got it in Nigeria? If yes, please how did you go about? Was it seamless? And did the product work the magic for you?
@Lonbites
@Lonbites 3 года назад
Where can you buy this? Any links
@3dformulations383
@3dformulations383 3 года назад
stickydashfix.com
@mikewill9384
@mikewill9384 4 года назад
Where is it sold
@3dformulations383
@3dformulations383 4 года назад
We ship world-wide. stickydashfix.com
@riannahamilton3184
@riannahamilton3184 3 года назад
Where can I get this product?
@3dformulations383
@3dformulations383 3 года назад
Hi Rianna, Our website is: stickydashfix.com
@inthenewsbw2003
@inthenewsbw2003 4 года назад
Can i use a sprayer to apply the second coat, so as not to show brush strokes?
@3dformulations383
@3dformulations383 4 года назад
Hi Shah, I don't think spraying is necessary - brush strokes can be dealt with simply by using a piece of sponge to apply a light coat using a "dabbing" motion to even out the finish. The foam brushes supplied with the kit do a good job at reaching into the difficult areas closest to the windscreen, but can leave some brush marks sometimes.
@ravigrewal3510
@ravigrewal3510 4 года назад
do your kits include the filler and paint? free shipping to canada?
@3dformulations383
@3dformulations383 4 года назад
We recommend applying a few light coats first and then assess if it's worth attempting to fill any gouges, sometimes filling larger gouges can make the repair obvious, because it's difficult to match the dashboard texture. We don't recommend any particular hardware-store filler brand, so long as it's water-based and reasonably flexible. You could also try mixing the Surface Coating with a suitable filler to improve flexibility and compatibility of a filler. You are very welcome to send some pictures of your dashboard to our Product Developer, his email address is derek@3dformulations.com.au and he will give you an honest opinion of the results that you can expect in addition to any advice and tips.
@3dformulations383
@3dformulations383 2 года назад
Hi Riyas, We ship world-wide from warehouses in the United States and Australia. Our website is: stickydashfix.com
@Eddycmj1
@Eddycmj1 4 года назад
Please how can I get this kit. My 2010 Camry dash is so sticky .
@3dformulations383
@3dformulations383 4 года назад
Hi Maduafokwa, our products are available at: www.stickydashfix.com
@3dformulations383
@3dformulations383 4 года назад
I'm sorry your dashboard has become sticky. You're not alone, it has been quite distressing for many owners, and we're committed to your success.
@Eddycmj1
@Eddycmj1 4 года назад
3d formulations I've made an order for your product to Nigeria. Hope to get it soon. 😊
@3dformulations383
@3dformulations383 4 года назад
It's on it's way!
@Eddycmj1
@Eddycmj1 4 года назад
3d formulations I hope the brush for spreading the coat will also be added. It will be a perfect tool for that job.
@kathmandun8749
@kathmandun8749 4 года назад
It comes out too shiny, I challenge this company to come out with a perfected product that makes the dashboard look more original
@silvestrecg90
@silvestrecg90 3 года назад
I just applied on my corolla 2007. It wasn’t looking 100% original because in my case, I could still see the lines of the brush after a few coats of the product. 2 days after the application I’ve applied meguiars ultimate protection and now is looking awesome.
@ryan8040
@ryan8040 3 года назад
@@silvestrecg90 did it get rid of brush strokes??
@caramellohoney
@caramellohoney 3 года назад
@@silvestrecg90 did you use a different product after sticky dash?
@caramellohoney
@caramellohoney 3 года назад
@@ryan8040 I want to know too??
@silvestrecg90
@silvestrecg90 3 года назад
​@@ryan8040 not 100% but I applied Ultimate Protectant - Meguiar's after the sticky dash fix and looks good. Stills a bit shiny but definitely not melting anymore.
@mperez2113
@mperez2113 3 года назад
Please, save your money. The product does not work. I applied it several times and today I took my car for a ride after the winter and as soon as the sun hit the dash it started to shine and get sticky. I had some hope with this product but it did not fullfill my expectations.
@3dformulations383
@3dformulations383 3 года назад
Dear M Perez, We have helped thousands of motorists world-wide rectify their defective dashboards - something that the vehicle manufacturers couldn't or wouldn't do. As stated on our website: "The Surface Coating is a permanent product - however, every dashboard will be in different in condition. The same applies to the various makes and models affected by the defect. The chemical reaction occurring on some dashboards can be very aggressive and over the long term, may require additional coats or touch-ups. Some areas closest to the windscreen and the instrument hood may require more coats to permanently overcome the adhesive. We recommend retaining left-over product in case touch-ups are required in the future". We want every customer to get a great result and are prepared to do whatever it takes to achieve this. Rather than leaving comments, please email our Product Developer derek@3dformulations.com.au with your Order# and some pictures of your dashboard and I think you'll find he'll be very pleased to re-instate your hope in the product. The SDF Team.
@saleemsheikh6929
@saleemsheikh6929 4 года назад
Is it available in UAE ? are you on amazon as well ?
@3dformulations383
@3dformulations383 4 года назад
Yes Saleem, we can ship to UAE - we're not on Amazon, our website is: stickydashfix.com
@dangoll5967
@dangoll5967 4 года назад
3d formulations can you pleeeeeeease put you product on Amazon. In would be a lifesaver for thousands of people. Literally!!!
@dangoll5967
@dangoll5967 4 года назад
3d formulations or at least lower the cost of the product by a little.
@3dformulations383
@3dformulations383 4 года назад
Thanks for the feedback Dan, what if it was available at your local Toyota Dealership?
@dangoll5967
@dangoll5967 4 года назад
3d formulations that would be great! But could you guys do it soon? The shipping price is 😳.
@kathmandun8749
@kathmandun8749 4 года назад
Looks horrible
@je4n
@je4n 3 года назад
send to brazil?
@3dformulations383
@3dformulations383 3 года назад
Jean, yes we ship world-wide including Brazil.
@Heisrisin3
@Heisrisin3 3 года назад
Don't waste your money. Use Orange Glo.
@jmq9270
@jmq9270 2 года назад
Anyone else just here for the music?
@zwarst
@zwarst 2 года назад
How to fix your sticky/shiny/melting Dashboard - Toyota Camry, Lexus, Nissan, Mazda, Kia & Subaru ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1hSkEVSnfXc.html
@ramonayala5796
@ramonayala5796 3 года назад
JUST GET A DASH COVER FOR 49.00 $ AND PROBLEM FIXED 🤷‍♂️
@sc3034
@sc3034 3 года назад
Dash covers can (and do) affect airbag deployment.
@butchsison8751
@butchsison8751 Год назад
How to order?
Далее
Я ДОСТРОИЛ ЗАВОД - Satisfactory
19:13
Просмотров 170 тыс.
Melting dashboard problem
3:46
Просмотров 80 тыс.
Cracked Dashboard Repair - Padded Dashboard
7:03
Просмотров 1,8 млн
Sticky Dash v53
11:39
Просмотров 54 тыс.
Sticky Dash Fix | Lexus Toyota
3:46
Просмотров 251 тыс.
This Is A Permanent Fix For CRACKED DASHBOARD!!
19:31