How to fix your thread breaking on your sewing machine 

I have to say thank you so much for this video!! This was the only video I saw that said anything about the needle plate causing the thread breakage. I had a brand new machine and it just happened to have a small burr on the plate. I was on the verge of returning the machine and saying it was garbage, but a little piece of sand paper and everything works like a dream. Thank you so much for your videos. You are awesome. Living in rural Arizona we don't have a repair shop unless we drive 2 hours. Thank you!!!😊

Wow! I spent most of the day yesterday trying to figure out why my thread kept breaking! So glad I found you. I had never heard of this problem. However I checked your theory and imagine my surprise. There were little rough areas on my plate. Did what you showed and it's been fine ever since. Thank you, thank you!

Amazing, rubbed plate as only tiny scratch breaking thread - its works, so pleased thank you. One happy woman in Australia, I can get on with my sewing, thanks a million. . .

Thank you so much. I'm just getting back into sewing and thought that somehow I had forgot how to use a sewing machine. After watching your video I took a look at the plate and the presser foot and noticed roughness. Got some 200 sandpaper to smooth it out and some 2,000 sandpaper to polish it and now I'm back in action and feeling more confident about my ability to use the sewing machine. :) :) :)

The pulling of the fabric was my error, I am glad to stumble on this video. Thank you and god bless.

Thank you!! .I wouldn't know what I'm doing without this video my thread broke relentlessly on my new Singer 306w I referenced this video & fixed my first sewing problem!

Thanks for the information, I will check out my bobbin case and needle plate. I love Hebrews 11:1 crawling across the bottom of the video. Thanks for that too.🤗❤️🙏🏻

Thank you sooooo much! My machine kept breaking thread during the end of a sewing class. During that class, I used a seam tape to hold two pieces of fabric together until I stitched it together. That’s when the problem of constantly breaking thread started to be apparent. I inspected the needle and it was all gummed up with sticky stuff from the tape. I took my machine home and found your video. Followed your instructions and although I did not have needle strikes anywhere on the plate or the bobbin tray, I did have that gummy glue from the tape in the same area of the bobbin tray you said should be smooth to the touch. I also inspected the plate closely and noticed a stubborn piece of sticky glue in the area that you sanded. I even had sticky stuff underneath the presser foot which probably were working against my feed dogs. So I cleaned it all off really good with a cotton ball and alcohol until all the gummed up sticky stuff was gone and all areas were silky smooth to the touch. I put the machine back together, tested it and BOOM! Perfect stitches with zero broken thread. Thanks again!

You are a Christmas miracle. Thank you.

Thank you so much, it was really frustrating to sit to sew and see your thread giving up every time. Infact I started feeling spooky about it that the thread was going in there but coming up broken 💔. It was so annoying that I thought of giving up my sewing project for the day. And your video helped me. Because I had figured out that it's this rough edge on the footer but I never knew it was a needle strike that caused it in first place. And I also din't know how to repair it infact I thought of buying one more footer and check whether it has the same issue. Sewing is fun only when it doesn't trouble.❤

You just saved me the cost of another machine! Thanks!!

Very detailed and helpful instructions. Great quality video too!

Hi. I just used this method to save my old machine. I don’t think they sell needle plates for my model anymore so this video saved my life! Thanks a lot! On my last project I had bent my needle and since then the machine wasn’t sewing on thicker fabric. This method fixed my machine!! God bless you ❣️

Thank you so much. After watching your video i found the plate was so jagged. I sandned it down. Now its working. Thank you so, so much.

I love you, man! What did I do without you!!!

Thanks for sharing your knowledge! 👍

Great information thank you so much! Very helpful.

Thank you so so much. Never too old to learn.

I love this channel, too bad no one monitors it, there a loads of wonderful questions and situations we all could be helped by.

..you made me giggle when you said 'learn with me.. ' and looked stricken! 😂

A big "thank you" from Brazil! Your instructions were really helpful!

love this. so glad i found you. You make me want to get back into sewing. I just gotta figure out the bobbin threading. And still working on thread tension.

that's exactly what I was looking for, thank you so much!

YES! Your recommendations worked!

Thank you I fix the problem that I had just by using a nail filer and smoothing the needle plate and the thread stopped ripping ,thank you I was about to buy a new machine 😀

THANKS!!! I have adjusted all I can and was having issues. This is what I needed!! I remember when I was plaging tug a war with my sewing machine a few projects ago and have issues ever since. I would not have guessed the thread was catching on the plate! Thanks!

8:35 I sew the hems on military vests. it’s a tapered hem, so resistance is needed in a production standpoint.

SUPER idee thanks Margo Netherlands

Your helps are so great! Thanks.

Thank you so much. I just try it and out worked. My thread stopped breaking.

Thank you for tips . Let me try get back to too

Great info thank you!

Interesting 🤔. Thanks!

Anybody who is unexperiecend in sewing should be FORCED to watch this, before even getting started. When I made my first attempts in sewing, I had a very fluffy, furry, long haired goat type of fabric. Of course, the fluffs got stuck somewhere between the feed dogs and the needle plate. A bird nest was created, which I couldn‘t see from the top, the fabric didn‘t move any more, the machine started sewing on the spot, which made the bird nest even worse, I started to panic, and forced the fabric through, by pulling it to the back. Result: Bent needle, causing damaged stitch plate, thus: Bent needle shaft, and about 2 yards of thread all over and around the stitch plate, the feed dogs and the bobbin case. On a brand new machine. I obviously learned it the hard way 🙈 which, would I have watched a video like this before, never have happened. Thanks for these very comprehensible and clear explanations. Oh: And whenever you sew fluffy fabric, I highly recommend you put some baking paper between the fabric and the machine.

Thank you so much

thanks a lot, im just starting on using my machine and picked up some newby tutorials, at first i thought my tension is to high... lol... was set on 1 ... but then i noticed it does thread the cloth/fabric for like 1 or 2 times, then the thread disappears from the needle as it comes up... so something is catching it inside... il do some maintenance tomorrow :D

Excellent video, keep it up.

Thanks very much sir

very helpfu!👍👍

Hey! your videos are so helpful, thank you for uploading them. I am working on my singer Heavy Duty, got my timing reset, and my machine was working perfectly until I returned to it this morning to find my bobbin case lifting and interfering with my thread movement. Every few rotations the bobbin case gets obstructed by something, tilts, and presses on the thread--ripping it. Any ideas on what my issue might be? I am rotating the play slowly to see where the obstruction happens, I've cleaned out the shuttle hook, I've done about all I can think of doing and am at a loss. Anything helps! Thank you so much!

You are awesome !!

Guilty! I've bent or broken needles due to some sort of carelessness, and also done damage to the needle plate. Plus I've damaged plastic bobbin cases as well. I've never tried using the sandpaper trick (brilliant idea - thank you!) as a temporary fix until I can replace the damaged part but I've used a trick of my own. I have a specialized set of emery boards having 50 grit up to 280 grit. I use them in a similar fashion to smooth out dings in the needle plate as well as bobbin cases. Poor quality needles also can cause thread breakage. I read somewhere (sorry, don't remember where) that if you're having a problem with thread breakage and have eliminated all other possibilities, get a jeweler's loupe or a VERY strong magnifying glass and examine the eye of your needle. I wasn't sure I believed this until I looked for myself. Surprise! You may just discover that the inner edge of the eye is rough - ergo, thread breakage waiting to happen. So throw that one out and put in a new one.

I believe that's exactly what's going on with mine 😢 i knew it could be a problem , I tried it an it works 😊

I use a dremel ,works great

When sanding, it is worth protecting the elements that are not sanded with adhesive tape.

Thanks!

Thanks for the video. I have a problem where the top thread is getting stuck to the sharp edge (which seems to be bent) on the device that the top-loading bobbin casing sits on. It is plastic (Kenmore 380.19112900). Is that part replaceable and where would I find it? I've looked everywhere online but no luck. Thank you.

I took my quantum CXL sewing machine to be repaired. I was told that I have to replace the motherboard. Watching your video I hope you can help me decide to buy a new machine or pay for a repair. Does it cost much for a motherboard

My swing m’échine is jaming a lot on both sides. Any help and advise please? Thanks

I am wondering if you could demonstrate how to adust your needle bar. I guess I am assuming its the needle bar that needs to be adjusted. I am on a brother cs7000 and my need is rubbing the hook as it is coming up and there fore breaking my thread or making it come unthreaded.

Fashion mate 252. Yesterday my tension was set on 3.5 and everything seemed fine. After sewing, I could pull the material out to cut the thread and not feel like the thread was going to break. But now, with a tension of ONE (1.0), I can barely pull the thread down after threading the machine without feeling like it's going to break. And sometimes it does break when sewing. The only variable that my novice eyes can see are the tension disks. Maybe it's the way I'm adjusting the disks. So yesterday, I feel like I had beginners luck. FRUSTRATING.

Congratulations :)

my take up lever (i think thats what ya call it) is not level so i have to put the thread in manually. SHall i unscrew machine top to see if i can fix? just putting it out there.

My sewing machine hates me! I think it wants a divorce! After spending over a year to make it work properly, I'm about to grant the divorce, uncontested!

I didn't know not to pull on the fabric, I often do that just to keep it taunt. Thanks for that tip! Do you think I could use my dremel tool to do some of the sanding or would it be too much? When I cut sandpaper, I use a cheap utility knife (aka box cutter) from the dollar store. Great vid, thanks. Be blessed.

Fill the divet with nail polish. Light sand after.

Hi. By any chance you notice a very thin tear on the bobbin case( like a paper tear like cut on your finger) . You notice thread sticking in that crack/tear, in this case bobbin case has to be replaced?

Hello I have a singer talent sewing machine and this machines problem is that the tension gear is not adjust to properly actually I can't adjust the gear of tension so plz help me to solve the issue of my machine

I filed down my needle plate but thread still keeps breaking. What else can I check to fix this problem?

what about using a "DRUMEL" tool with a grinder wheel and simply enlarge the whole?

I wish you would go over the dog 🐕 feet like this very good video thanks for all you do!!

is the bobbin case supposed to rock? it makes a sound near the bobbin and then it breaks

Hi there, I have an unusual problem and I don't even know how to describe it. I have an older (but not antique) Eva Midinette 85 Super. My thread keeps being strangled on the part where you do the 'down and then back up' thing, with that thin wire inside that goes up and down depending on depending on whether you're actually sewing or not. I've been trying to fix it all day and am at my wits end. No googling has describes this part even, not even my manual has a word for this part; it's just generalized with the other threading bits :/ I had the machine fixed up by a professional, and it's been running fantastic since... up until today. :(

CAN YOU PLEASE HELPME WITH MY MANUAL CRANK LEATHER SEWING MACHINE.?

Please make more videos.

I got a vintage domestic 468 and the top thread keeps breaking, I don't have a manual, so I'm learning blind

I had LU 1560N-7 JUKI DOUBLE needle machine while backtacking on thickness area thread cut occurs kindly support me...

I have a econosew juki 360 jc brand new industrial machine . Since minute one this machine is breaking the thread THAT COMES OUT OF THE BOBBIN not the top thread… My mechanic has going around but never fix it

Thank you. I wonder if I've been tugging in an effort to smooth unwieldy fabrics.

are there any other reasons why the thread keeps breaking?

Actually, cutting through fine sandpaper sharpens your scissors. ❤️

My machine (Brother ST150HDH) is only a few months old and I just checked it for needle strikes. Relieved to find a smooth needle plate and bobbin area. Might be a different story for my older Brother SQ 9185 I have had for several years and remember a few times I did some tugging trying to keep thick fabric from hanging off the table because the weight would drag fabric under the needle so my stitch line was crooked. I am now using a bigger table. I try to be gentle with my new machine because it sews so nicely. I chose to watch this video because I saw a video recently where they said their thread was frequently breaking. I would have guessed bad cheap thread or not threading properly before seeing your video. Definitely tips I want to remember! Edit: I am a great at spelling - but autocorrect is infuriating.

Why does my thread fray and then snap. I change the needle, I have the correct distance from needle to hook, The stitch locks in the centers,so as far as I know the tensions are correct, There`s no nicks on the hook,neither needle eye, There`s no nicks on the race, Its bonded nylon thread, with a leather needle sewing through two soft pieces of leather, about 1 mm thick folded making 2 mm thickness, Quite often well nearly every time sewing for about 20 stitches the hand wheel jams I look down at my material I see frayed cotton and I cannot pull the material away because the thread has got really tight underneath the material and some times above, I have also notice on a few occasions quite often actually `where the thread is meant to slip over the shuttle then meant to come over through the gap at the back end of the shuttle , My cotton some times is getting jammed there causing the hand wheel to jam, as I use the machine with out the motor, So the thread is getting caught some times jamming the shuttle against the race ,and the thread is fraying and then most of the time snapping,on other occasions, Its a SINGER twin needle 7 class possibly a 7-38 `year it was made 1932 big old thing but only using one needle at the moment,trying to work out the fault the shuttle and hook is similar type to a COWBOY CB 3200 machine, Any advice that comes to mind why the thread is getting jammed in that spot and to why the thread is fraying after sewing 20 stitches,

Darn I’m guilty of tagging!!

An emory board or a metal nail file will work just fine. Let th tool do the work.

Cutting sandpaper or aluminum foil with scissors actually is a way to sharpen them up.

My thread keeps popping out of the needle while sewing and I can't finish my project.😵‍💫😵‍💫😵‍💫Help❗my needle breaks or bends...My machine is model 50T8 singer..

u lurn some every day, never taught about those things.

My thread only breaks in reverse.

Thanks for this video! It is very helpful … LOVE the Bible verse!

I use an emery board ( fingernail file) lol

Good content but maybe too much repitition. I like your channel. :)

🙃☺

:)

Good advice but TOO slow. I had to listen at double speed and it was still too long.