Here's how to get rid of rat urine smell in simple steps and make your home or office smell as fresh as a daisy again!
Things you need to complete this task...
Gloves - fave.co/473hGAB
Mask - fave.co/3u0t7uI
Mop - fave.co/47ck6xy
Scrub brush - fave.co/497QanC
Bleach - fave.co/3SGK6g4
Fans - fave.co/3s4KUjS
Dehumidifiers - fave.co/3QgpmsO
Air purifiers - fave.co/3sczIlb
Steel wool - fave.co/49y69eS
Caulk - fave.co/3QMcvjf
Activated charcoal - fave.co/3S6B4Zr
Baking Soda - fave.co/46WHtdR
White vinegar - fave.co/3tSVPNW
Enzymatic cleaners - fave.co/3RTzrMr
This channel contains affiliate links which means we might get a commission if you make a purchase, without any additional cost to you.
Now that you have all your tools and materials ready, let's get rid of that awful smell...
Step 1: Identify the source of the smell
This step is crucial because it allows you to focus your efforts on the specific areas where the rats are urinating, rather than treating the entire space.
To identify the source of the smell, you will need to inspect your home or office for signs of rat activity. Rats typically leave droppings, gnaw marks, and urine stains in areas where they are active. Look for these signs in attics, crawl spaces, basements, and other areas where rats may be able to enter your home. Pay special attention to areas that are dark and damp, as rats prefer these types of environments.
Once you have identified the source of the smell, you can then focus your efforts on cleaning and sanitizing that specific area. This will not only help to remove the smell, but it will also help to prevent the rats from returning to that location.
When inspecting for rat droppings, gnaw marks, and urine stains it is important to wear gloves and a mask to protect yourself from bacteria and other contaminants that may be present in the urine.
Step 2: Clean up the urine
Cleaning up removes not just the urine, but also other contaminants. Furthermore, it helps to reduce the smell.
A solution of water and white vinegar is a good option for cleaning up rat urine. The acidity of the vinegar helps to break down and neutralize the urine, while the water helps to rinse away any remaining contaminants.
Before you start cleaning, wear gloves and a mask to protect yourself from bacteria and other contaminants that may be present in the urine.
When cleaning up the urine, it's important to work from the perimeter of the area towards the center. This is to avoid spreading the urine further. Start by dampening the area with a mop or sponge, then apply the cleaning solution. Use a scrub brush to agitate the solution and break up any dried urine or stains. Rinse the area thoroughly with water, and wring out the mop or sponge frequently to remove as much urine as possible.
Step 3: Disinfect the area
After cleaning, it is time to disinfect the area. This step is important because it helps to kill any bacteria or other microorganisms that may be present in the urine, which will help reduce the risk of infection and further reduce the smell.
A solution of water and bleach is a good option for disinfecting the area. The ratio should be one part bleach to ten parts water.
When disinfecting the area, follow the same process as cleaning the area. The only difference is that after agitating the solution, allow it to sit for at least 10 minutes, then rinse the area thoroughly with water.
Don’t forget to wear gloves and a mask to protect yourself from the bleach solution.
Furthermore, make sure that the room is well-ventilated and avoid mixing bleach with other cleaning products as doing so can release some dangerous gases.
Step 4: Dry the area
This removes any remaining moisture from the area, which will help prevent the growth of mold and mildew, and further prevent the smell from returning.
To dry the area, you can use fans or a HEPA (high-efficiency particulate air) dehumidifier. You can place fans in the area to blow air over the surfaces and help evaporate any remaining moisture.
A dehumidifier can be used to remove moisture from the air, which can help to dry the area more quickly. To use a dehumidifier, place the dehumidifier in the affected area, turn it on, and then set it to the appropriate humidity level for the room. It is recommended to keep the humidity level between 30-50% to prevent mold growth.
It's important to run the fans or dehumidifier until the area is completely dry. This may take several hours or even days, depending on the humidity level and the size of the area. It's also important to check the area regularly
5 сен 2024