I come across this video. There aren't much information on internet how to do this. Can you share what tools you use to do it? I have couple pin pusher but non of them are small enough to fit into that hole. Thanks
@@johnflerner1 Very odd. I have a sewing needle that fit that hole. What I found is the crown side of the lug (Both top and bottom), there is nothing in the hole. The needle can pass though it (I removed the fake screw). On the other side of the lug , there is something like a pin inside that is not moving at all. There is no way I can push it with a needle , let alone using a wire. I wonder why is different. I just can't figure it out. If I look at some video for Calibre with Leather Strap, it look like those 2 hole are actually not use and there is another hole for the spring bar.
I hope you figured this out by now my friend, but for any one else who hasn’t and may need this in the future …. Everything the guy is saying in the video is correct, he just failed to mention that before you can push out that “pin” that’s inside that hole, it is a screw down pin so it needs to be half screwed loose (lefty loosey) before you can then push it out from the outside not the inside. It will pop right out (be careful it’s very tiny and easily lost if not done in a contained area). Good luck!